Super material will make lighting cheaper and fully recyclable

February 5, 2010

With the use of the new super material graphene, Swedish and American researchers have succeeded in producing a new type of lighting component. It is inexpensive to produce and can be fully recycled.

The invention, which paves the way for glowing wallpaper made entirely of plastic, is published in the scientific journal by scientists at Linköping University and Umea University, in Sweden, and Rutgers, The State University of New Jersey.

Ultra-thin and electricity-saving organic light diodes, so-called OLEDs, have recently been introduced commercially in mobile phones, cameras, and super-thin TVs. An OLED consists of a light-generating layer of plastic placed between two electrodes, one of which must be transparent. Today’s OLEDs have two drawbacks - they are relatively expensive to produce, and the transparent electrode consists of the metal alloy indium tin oxide. The latter presents a problem because indium is both rare and expensive and moreover is complicated to recycle. Now researchers at Linköping and Umeľ universities, working with American colleagues, are presenting an alternative to OLEDs, an organic light-emitting electrochemical cell (LEC). It is inexpensive to produce, and the transparent electrode is made of the carbon material graphene.

“This is a major step forward in the development of organic lighting components, from both a technological and an environmental perspective. Organic electronics components promise to become extremely common in exciting new applications in the future, but this can create major recycling problems. By using graphene instead of conventional metal electrodes, components of the future will be much easier to recycle and thereby environmentally attractive,” says one of the scientists, Nathaniel Robinson from Linköping University.

Since all the LEC’s parts can be produced from liquid solutions, it will also be possible to make LECs in a roll-to-roll process on, for example, a printing press in a highly cost-effective way.

“This paves the way for inexpensive production of entirely plastic-based lighting and display components in the form of large flexible sheets. This kind of illumination or display can be rolled up or can be applied as wallpaper or on ceilings,” says another of the scientists, Ludvig Edman from Umeľ University.

Graphene consists of a single layer of carbon atoms and has many attractive properties as an electronic material. It has high conductivity, is virtually transparent, and can moreover be produced as a solution in the form of graphene oxide.

Researchers all over the world have been trying to replace indium tin oxide for more than 15 years. Indium is in short supply, and the alloy has a complicated life cycle. The raw material for the fully organic and metal-free LEC, on the other hand, is inexhaustible and can be fully recycled - as fuel, for example.

Explore further: Sensor of plastic can be produced in a printing press

More information: The study is published in the journal ACS Nano and is titled “Graphene and mobile ions: the key to all-plastic, solution-processed light-emitting devices.”

Related Stories

Sensor of plastic can be produced in a printing press

February 8, 2005

Electrochemical transistors made of plastic open myriad possibilities. Since both electrons and ions are active, they can function as a bridge between traditional electronics and biological systems. A new dissertation from ...

Next Generation Light Source

November 23, 2005

The Technische Universität Dresden partakes in one of the world’s largest projects on the development of innovative organic light-emitting diodes (OLEDs). Scientists at the Institute of Applied Photophysics have been developing ...

Will carbon nanotubes replace indium tin oxide?

March 9, 2009

( -- Up until now, George Grüner tells, most of the studies regarding the properties - and uses - of carbon nanotubes have been restricted to the visible spectral range. “We, however, were interested ...

Recommended for you

Physicists develop new technique to fathom 'smart' materials

November 26, 2015

Physicists from the FOM Foundation and Leiden University have found a way to better understand the properties of manmade 'smart' materials. Their method reveals how stacked layers in such a material work together to bring ...

Mathematicians identify limits to heat flow at the nanoscale

November 24, 2015

How much heat can two bodies exchange without touching? For over a century, scientists have been able to answer this question for virtually any pair of objects in the macroscopic world, from the rate at which a campfire can ...

New sensor sends electronic signal when estrogen is detected

November 24, 2015

Estrogen is a tiny molecule, but it can have big effects on humans and other animals. Estrogen is one of the main hormones that regulates the female reproductive system - it can be monitored to track human fertility and is ...


Adjust slider to filter visible comments by rank

Display comments: newest first

4.5 / 5 (2) Feb 05, 2010
This is great news. OLED screens have unmatched picture quality, and I would love to see the day when my walls are made out of the stuff! Brings a whole new meaning to the words "xbox 360" :D
Feb 06, 2010
This comment has been removed by a moderator.
4 / 5 (1) Feb 06, 2010
A word of caution. I remember reading about OLED research back in the 90s. They said it would be much cheaper to produce once they got the production down... and the technicalities worked out. You can see how that turned out. inexpensive they said.
3.3 / 5 (4) Feb 07, 2010
dirk -
You need to read the article about liquid glass, you'd almost have to assume that if you mixed it with graphene you would get fusion power AND warp drive.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.