ESA advances Vega rocket evolution beyond 2025

ESA advances Vega rocket evolution beyond 2025
Preparatory activities are under way for the evolution of Vega beyond 2025. These will be based on existing building blocks and those under development capable of improving the system’s competitiveness for the normal Vega-C payload class and in the small satellite market. Credit: ESA-Jacky Huart, 2017

ESA will further increase the competitiveness and environmental sustainability of Europe's Vega launch system beyond 2025 through a contract signed with Avio in Italy.

Vega operates from Europe's Spaceport in French Guiana to launch light satellites to one or multiple orbits in a single launch. This contract takes Vega a step further and marks the start of a new phase in preparation of a new Vega launch vehicle called Vega-E, which will make extensive use of Vega-C building blocks.

The objective with Vega-E is to further increase the competitiveness and performance of Vega-C—which is planned to have its first flight in 2022. This will increase its flexibility in terms of payload mass and volume and reduce the launch service cost and globally the cost of launch per kilo offered in the market.

The key for achieving these objectives is the use of new technologies for a completely new upper stage, featuring a new low-cost liquid-fuelled engine.

"This contract takes Vega a step further having at its heart the new M10 liquid oxygen–methane cryogenic engine, which will further increase its competitiveness, performance and sustainability," said Daniel Neuenschwander, ESA Director of Space Transportation.

ESA advances Vega rocket evolution beyond 2025
The 3D-printed thrust chamber assembly of the methane-fuelled M10 rocket engine passed its first series of hot firing tests at the NASA Marshall Space Flight Center in the USA during February 2020. The M10 engine will power the upper stage of future Vega evolutions from 2025. Credit: ESA/NASA

Vega-E will have three stages unlike Vega-C which has four. Two stages will be derived from Vega-C: the first stage P120C which provides the thrust at liftoff and the second stage solid rocket Zefiro-40 motor. The new third stage is the liquid oxygen–methane cryogenic upper stage which is the core of Vega-E preparation.

"Vega-E's upper stage will replace the third stage Zefiro 9 solid-propellant motor and the fourth stage upper AVUM of the current Vega configuration. This will have a beneficial effect on performance and cost," explained Renato Lafranconi, Vega programs manager at ESA.

Vega-E's upper stage will improve mission flexibility through its new M10 expander cycle engine with multiple reignition capability. The fullscale 3D-printed thrust chamber assembly of the M10 passed its first series of hot firing tests last year which also qualified new efficient manufacturing methods.

"The reduction of emissions and combustion waste makes the introduction of the M10 engine a further improvement in environmental sustainability which is a driver for the future of Vega," added Adriana Sirbi, Vega Evolution Preparation Manager at ESA.

Industries and universities from eleven countries are involved in the preparation of the Vega-E launch system, and will contribute to the success of this European rocket. Prime contractor, Avio, with partners will further define the launcher system and its subsystems as well as the preliminary design of the Vega-E launch pad and the associated infrastructure at Europe's Spaceport in French Guiana.

The contract, worth €118.8 m, was signed at ESA's establishment in Frascati, Italy, by Daniel Neuenschwander, ESA Director of Space Transportation and Giulio Ranzo, CEO at Avio.

Explore further

Europe's Vega rocket successfully launches

Citation: ESA advances Vega rocket evolution beyond 2025 (2021, July 21) retrieved 25 June 2022 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors