Acoustic waves give a bounce to real-time seismic imaging

Acoustic waves give a bounce to real-time seismic imaging
Figure 1 From: Near-surface real-time seismic imaging using parsimonious interferometry

A remote-sensing technique that can detect real-time changes in subsurface environments has undergone successful testing in the desert just outside the KAUST campus in Thuwal, Saudi Arabia.

To avoid the time-consuming and destructive impact of drilling, geologists are increasingly turning to an approach known as . This procedure uses sonic sources at many different locations to send acoustic waves deep underground and then measures how long it takes for the waves to return to receivers on the surface. The travel time of the waves depends on properties such as the hardness or porosity of materials they pass through, and so this method can easily identify unique subsurface features, such as pockets of water.

However, conventional seismic imaging is still too slow to detect real-time geologic events, notes KAUST geophysicist Gerard Schuster. "For a conventional seismic experiment, you need many different angular views to accurately estimate the properties of each substructure, which demands many hours to deploy and excite seismic sources over hundreds of different locations," he says.

For the past 20 years, Schuster has been working on a solution to this issue by focusing on how the cyclical patterns of begin to lag or lead each other after passing through an underground material. These changes, known as phase differences, can be inverted by seismic interferometry to provide high-resolution structural information while requiring far fewer audio sources.

Acoustic waves give a bounce to real-time seismic imaging
Figure 2 From: Near-surface real-time seismic imaging using parsimonious interferometry

"This approach requires much less effort," says Shuster. "Taking the time differences between the phases allows you to answer questions about the hardness and softness of geology with just a few experiments instead of hundreds."

In their latest work, Schuster and colleagues performed a controlled time-lapse experiment to validate the capabilities of their seismic interferometry technology. First, the team set up an array of audio sources and receivers over a dry sand dune. Then, they injected 12 tons of water into the dune over a few hours while recording nearly one hundred interferometric measurements for each source location. This data was transformed every two minutes into snapshots of subsurface water flow as it percolated through substructural layers several meters under the surface.

"Our three-dimensional simulations of the experiments convinced us that what we saw wasn't a false reading," says Schuster. "The initial impact of these findings can be useful for environmental engineers who require rapid and inexpensive monitoring of the subsurface—for example, real-time imaging of leaky dams, or efficient Martian or lunar seismic surveys."


Explore further

Study reveals how sand dunes alter seismic waves

More information: Sherif M. Hanafy et al, Near-surface real-time seismic imaging using parsimonious interferometry, Scientific Reports (2021). DOI: 10.1038/s41598-021-86531-5
Journal information: Scientific Reports

Citation: Acoustic waves give a bounce to real-time seismic imaging (2021, June 7) retrieved 14 June 2021 from https://phys.org/news/2021-06-acoustic-real-time-seismic-imaging.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
12 shares

Feedback to editors

User comments