Researchers explore new depths in infrared nanospectroscopy

Researchers explore new depths in infrared nanospectroscopy
llustration of subsurface infrared nanoimaging (nanoGUNE). Credit: Elhuyar Fundazioa

Researchers from the Nanooptics Group at CIC nanoGUNE (San Sebastian) demonstrate that nanoscale infrared imaging—which is established as a surface-sensitive technique—can be employed for chemical nanoidentification of materials that are located up to 100 nm below a surface. The results further show that the infrared signatures of thin surface layers differ from that of subsurface layers of the same material, which can be exploited to distinguish the two cases. The findings, recently published in Nature Communications, push the technique one important step further to quantitative chemometrics at the nanoscale in three dimensions.

Optical spectroscopy with , such as Fourier transform infrared (FTIR) spectroscopy, allows for chemical identification of organic and inorganic materials. The smallest objects which can be distinguished with conventional FTIR microscopes have sizes on the micrometer-scale. Scientists at CIC nanoGUNE (San Sebastian), however, employed nano-FTIR to resolve objects, which can be as small as a few nanometres.

In nano-FTIR (which is based on near-field ), infrared light is scattered at a sharp metallized tip of a scanning-probe microscope. The tip is scanned across the surface of a sample of interest and the spectra of scattered light are recorded using Fourier transform detection principles. Recording of the tip-scattered light yields the sample's infrared spectral properties and thus the chemical composition of an area located directly below the tip apex. Because the tip is scanned across the sample surface, nano-FTIR is typically considered to be a surface-characterization technique.

Importantly though, the infrared that is nano-focussed by the tip does not only probe a nanometric area below the tip, but in fact probes a nanometric volume below the tip. Now the researchers at CIC nanoGUNE showed that spectral signatures of materials located below the sample surface can be detected and chemically identified up to a depth of 100 nm. Furthermore, the researchers showed that nano-FTIR signals from thin surface layers differ from that of subsurface layers of the same material, which can be exploited for determination of the materials distribution within the sample. Remarkably, layers and subsurface layers can be distinguished directly from experimental data without involving time-consuming modeling. The findings have recently been published in Nature Communications.

More information: Lars Mester et al, Subsurface chemical nanoidentification by nano-FTIR spectroscopy, Nature Communications (2020). DOI: 10.1038/s41467-020-17034-6

Journal information: Nature Communications

Provided by Elhuyar Fundazioa

Citation: Researchers explore new depths in infrared nanospectroscopy (2020, July 23) retrieved 30 May 2023 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

A new dimension in chemical nanoimaging


Feedback to editors