New X-ray measurement approach could improve CT scanners

March 1, 2019 by Chad Boutin, National Institute of Standards and Technology
NIST scientists may have found a better way to calibrate CT scanners, potentially streamlining patient treatment by improving communication among doctors. Credit: Tyler Olson/Shutterstock

A new measurement approach proposed by scientists at the National Institute of Standards and Technology (NIST) could lead to a better way to calibrate computed tomography (CT) scanners, potentially streamlining patient treatment by improving communication among doctors.

The approach, detailed in a research paper in the journal PLOS ONE, suggests how the X-ray beams generated by CT can be measured in a way that allows scans from different devices to be usefully compared to one another. It also offers a pathway to create the first CT measurement standards connected to the International System of Units (SI) by creating a more precise definition of the units used in CT—something the field has lacked.

"If the technical community could agree on a definition, then?the vendors could create measurements that are interchangeable," said NIST's Zachary Levine, a physicist and one of the paper's authors. "Right now, calibration is not as thorough as it could be."

An object's ability to block X-rays—its "radiodensity"—is measured in Hounsfield Units (HUs), named for the Nobel Prize winning co-inventor of CT. Calibration of a CT machine, something every radiology facility has to perform regularly, involves scanning an object of known radiodensity called a phantom and checking whether these measurements give the right number of HUs.

A problem is that a CT scanner's tube—essentially its X-ray generating ""—creates a beam that is the X-ray version of white light, full of photons with different wavelengths that correspond to their energy. (If the human eye could see X-rays, you could run the tube's beam through a prism and see it break into a spectrum of colors.) Because a photon's penetrating power depends on its energy, the beam's overall effect on the phantom has to be averaged out, making it challenging to define the calibration.

Further complicating the situation is the way the tube's X-ray light has to change depending on the type of scan. Denser body parts need more penetrating X-rays, so the tube has a sort of color switch allowing its operator to adjust the tube voltage to match the job. Adjusting the tube's voltage alters the spectrum of the beam, so that it ranges between something like a "cool white" and a "warm white" light bulb. The variable spectrum makes it tougher to ensure that the calibration is correct for all voltages.

Add these complications to the differences that exist among various CT machine manufacturers, and you get a lot of trouble for anyone who wants to link the calibration of any given scanner to a universal standard. But if it could be done, there would be far-reaching benefits to both industry and medicine.

"You want interchangeable answers regardless of what CT machine you use and when," Levine said. "For one thing, you want doctors to be able to communicate between hospitals. Let's say a patient needs a follow up but is somewhere far from home, or the same scanner got a software upgrade that changes the number of HUs. If you can't measure accurately, you can't improve your technology."

Better calibration could make diagnosis more efficient and less costly as well, Levine said.

"Better comparisons among scanners might allow us to establish cutoff points for disease—such as emphysema getting a particular Hounsfield score or lower," he said. "It's also common for CT scans to turn up suspicious growths that might be cancerous, and a doctor commonly orders an MRI as a follow up. We might eliminate the need for that second procedure."

The NIST team had to overcome the uncertainties created by the tube's broad X-ray spectrum and tube voltage setting. Their idea was to fill several phantoms with different concentrations of powdered chemicals that are common in the body, and compare the phantoms' radiodensity using CT. The comparison would help link HUs to the number of moles per cubic meter, which are both SI units.

"Executing this idea was tricky, because the volume of a mole depends on the size of a given chemical molecule," Levine said. "A mole of salt takes up more space than a mole of carbon, for example. And the air in the powders represented a further complication."

The trickiness would make all but a math aficionado wince: Each chemical in the mixture could be characterized by two numbers, but the entire phantom created a 13-dimensional space that complicated the . Fortunately, the team was able to use a linear algebra technique well-known to data science to simplify the data down to two dimensions, which was far more manageable.

"Basically, we've shown that you can create a CT scanner performance target that any design engineer can hit," Levine said. "Manufacturers have been getting different answers in their machines for decades because no one told their engineers how to handle the X-ray spectrum. Only a small change to existing practice is required to unify their measurements."

Explore further: NIST PET phantoms bring new accuracy to medical scans

More information: Zachary H. Levine et al, Preliminary X-ray CT investigation to link Hounsfield unit measurements with the International System of Units (SI), PLOS ONE (2018). DOI: 10.1371/journal.pone.0208820

Related Stories

NIST PET phantoms bring new accuracy to medical scans

July 29, 2015

Teaming with a medical equipment company, researchers at the National Institute of Standards and Technology (NIST) have demonstrated the first calibration system for positron emission tomography (PET) scanners directly tied ...

Defining a national standard for dynamic pressure waves

May 25, 2015

In recent years, the physical damage done by pressure waves – such as traumatic brain injuries from explosives sustained by military personnel in the Middle East – has become an increasingly urgent public concern.

Extending traceable measurements inside the human body

March 26, 2018

The National Institute of Standards and Technology (NIST) is now providing a new measurement service that can improve the quality of magnetic resonance imaging (MRI) and provide a path for using MRI to make precise and traceable ...

Recommended for you

Coffee-based colloids for direct solar absorption

March 22, 2019

Solar energy is one of the most promising resources to help reduce fossil fuel consumption and mitigate greenhouse gas emissions to power a sustainable future. Devices presently in use to convert solar energy into thermal ...

Physicists reveal why matter dominates universe

March 21, 2019

Physicists in the College of Arts and Sciences at Syracuse University have confirmed that matter and antimatter decay differently for elementary particles containing charmed quarks.

ATLAS experiment observes light scattering off light

March 20, 2019

Light-by-light scattering is a very rare phenomenon in which two photons interact, producing another pair of photons. This process was among the earliest predictions of quantum electrodynamics (QED), the quantum theory of ...

How heavy elements come about in the universe

March 19, 2019

Heavy elements are produced during stellar explosion or on the surfaces of neutron stars through the capture of hydrogen nuclei (protons). This occurs at extremely high temperatures, but at relatively low energies. An international ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.