Researchers develop 'acoustic metamaterial' that cancels sound

BU researchers develop 'acoustic metamaterial' that cancels sound
The mathematically designed, 3D-printed acoustic metamaterial is shaped in such a way that it sends incoming sounds back to where they came from, Ghaffarivardavagh and Zhang say. Inside the outer ring, a helical pattern interferes with sounds, blocking them from transmitting through the open center while preserving air's ability to flow through. Credit: Cydney Scott for Boston University

Boston University researchers, Xin Zhang, a professor at the College of Engineering, and Reza Ghaffarivardavagh, a Ph.D. student in the Department of Mechanical Engineering, released a paper in Physical Review B demonstrating it's possible to silence noise using an open, ringlike structure, created to mathematically perfect specifications, for cutting out sounds while maintaining airflow.

"Today's barriers are literally thick heavy walls," says Ghaffarivardavagh. Although noise-mitigating barricades, called sound baffles, can help drown out the whoosh of rush hour traffic or contain the symphony of music within concert hall walls, they are a clunky approach not well suited to situations where airflow is also critical. Imagine barricading a jet engine's exhaust vent—the plane would never leave the ground. Instead, workers on the tarmac wear earplugs to protect their hearing from the deafening roar.

Ghaffarivardavagh and Zhang let mathematics—a shared passion that has buoyed both of their engineering careers and made them well-suited research partners—guide them toward a workable design for what the acoustic metamaterial would look like.

They calculated the dimensions and specifications that the metamaterial would need to have in order to interfere with the transmitted , preventing sound—but not air—from being radiated through the open structure. The basic premise is that the metamaterial needs to be shaped in such a way that it sends incoming sounds back to where they came from, they say.

As a test case, they decided to create a structure that could silence sound from a loudspeaker. Based on their calculations, they modeled the physical dimensions that would most effectively silence noises. Bringing those models to life, they used 3-D printing to materialize an open, noise-canceling structure made of plastic.

Trying it out in the lab, the researchers sealed the loudspeaker into one end of a PVC pipe. On the other end, the tailor-made acoustic metamaterial was fastened into the opening. With the hit of the play button, the experimental loudspeaker set-up came oh-so-quietly to life in the lab. Standing in the room, based on your sense of hearing alone, you'd never know that the loudspeaker was blasting an irritatingly high-pitched note. If, however, you peered into the PVC pipe, you would see the loudspeaker's subwoofers thrumming away.

On one end of the pipe, a loudspeaker blasts a noise. On the other end, the open acoustic silencing metamaterial redirects the sound as long as it's fitted in place. Video courtesy of the Zhang lab

The metamaterial, ringing around the internal perimeter of the pipe's mouth, worked like a mute button incarnate until the moment when Ghaffarivardavagh reached down and pulled it free. The lab suddenly echoed with the screeching of the loudspeaker's tune.

"The moment we first placed and removed the silencer...was literally night and day," says Jacob Nikolajczyk, who in addition to being a study co author and former undergraduate researcher in Zhang's lab is a passionate vocal performer. "We had been seeing these sorts of results in our computer modeling for months—but it is one thing to see modeled sound pressure levels on a computer, and another to hear its impact yourself."

By comparing sound levels with and without the metamaterial fastened in place, the team found that they could silence nearly all—94 percent to be exact—of the noise, making the sounds emanating from the loudspeaker imperceptible to the human ear.

Now that their prototype has proved so effective, the researchers have some big ideas about how their acoustic-silencing metamaterial could go to work making the real world quieter.

"Drones are a very hot topic," Zhang says. Companies like Amazon are interested in using drones to deliver goods, she says, and "people are complaining about the potential noise."

"The culprit is the upward-moving fan motion," Ghaffarivardavagh says. "If we can put sound-silencing open structures beneath the drone fans, we can cancel out the sound radiating toward the ground."

Researchers develop 'acoustic metamaterial' that cancels sound
Boston University mechanical engineers have created synthetic, sound-silencing structures—acoustic metamaterials—that can block 94% of sounds. Reza Ghaffarivardavagh (ENG) (front center) holds two of the open, ringlike structures over his ears while Stephan Anderson (MED) (left), Xin Zhang (ENG) (rear center), and Jacob Nikolajczyk (ENG) (right) make a racket. Credit: Cydney Scott

Closer to home—or the office—fans and HVAC systems could benefit from that render them silent yet still enable hot or cold air to be circulated unencumbered throughout a building.

Ghaffarivardavagh and Zhang also point to the unsightliness of the sound barriers used today to reduce noise pollution from traffic and see room for an aesthetic upgrade. "Our structure is super lightweight, open, and beautiful. Each piece could be used as a tile or brick to scale up and build a sound-canceling, permeable wall," they say.

The shape of acoustic-silencing , based on their method, is also completely customizable, Ghaffarivardavagh says. The outer part doesn't need to be a round ring shape in order to function.

"We can design the outer shape as a cube or hexagon, anything really," he says. "When we want to create a wall, we will go to a hexagonal shape" that can fit together like an open-air honeycomb structure.

Such walls could help contain many types of noises. Even those from the intense vibrations of an MRI machine, Zhang says.

According to Stephan Anderson, a professor of radiology at BU School of Medicine and a coauthor of the study, the acoustic metamaterial could potentially be scaled "to fit inside the central bore of an MRI machine," shielding patients from the sound during the imaging process.

Zhang says the possibilities are endless, since the noise mitigation method can be customized to suit nearly any environment: "The idea is that we can now mathematically design an object that can block the sounds of anything," she says.


Explore further

New metamaterial manipulates sound to improve acoustic imaging

More information: Reza Ghaffarivardavagh et al, Ultra-open acoustic metamaterial silencer based on Fano-like interference, Physical Review B (2019). DOI: 10.1103/PhysRevB.99.024302
Journal information: Physical Review B

Provided by Boston University
Citation: Researchers develop 'acoustic metamaterial' that cancels sound (2019, March 7) retrieved 22 May 2019 from https://phys.org/news/2019-03-acoustic-metamaterial-cancels.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
19889 shares

Feedback to editors

User comments

Mar 09, 2019
As old as the hills - phase sound cancelling in sound replay

When Channel 4 first started
David Bellamy, demonstrated this principal
with a glass tube of varying length
as
it is widely known, in the MRI hospital scanners
that
playing
back
the Dd..Dd..Dd..Dd..Dd.. Irritating sound
half a phase out
it
cancels the sound
as
Botanist, David Bellamy demonstrated in the 1980s on Channel 4

Mar 18, 2019
I am skeptical... this seems specifically tuned to a single resonance (similar to a Helmholtz resonator). I do not see this scaling to broadband frequency absorption.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more