Graphene makes its mark on gas separation

June 15, 2018, Graphene Flagship
Schematic representation of the material structure with PEI molecules, constrained between graphene oxide nanosheets. Credit: ACS

Graphene Flagship researchers overcame the theoretical limiting performance of membranes in gas separation. This collaborative research from Graphene Flagship partners CNR, University of Bologna and Graphene-XT has potential applications in hydrogen purification and carbon capture and storage.

Polymer-based membranes for have a trade-off between high gas permeability and high gas selectivity, the so-called Robeson upper bound. By combining individual sheets with polymer spacers, in a sandwich style structure, Graphene Flagship researchers have been able to overcome such limit, separating gas quickly and efficiently.

Focusing on producing a gas separation device useful for carbon capture and storage, the researchers devised a protocol to separate CO2from H2. Hydrogen production, both from natural gas or in gasification of liquid or solid fuels, is often accompanied by the formation of a significant amount of CO2, which needs to be removed before the gas is used. Efficient separation of the CO2has greater potential for capture of this greenhouse gas.

Using a bottom up approach, the researchers deposited alternated layers of graphene oxide and a polymer poly(ethyleneimine) - PEI, using a self assembly method, to make the gas separation membrane. By using graphene oxide, (a water-soluble graphene material due to its oxidised nature), the team was able to deposit individual graphene oxide layers separated by the PEI.

The depth of the PEI layer acting as a spacer between the graphene oxide layers was found to be vitally important to guarantee high gas flux through the membrane. This separation system therefore contains a layered material and an ultra-thin polymer layer with thickness of approximately twonanometers. The force the gaseous molecules to diffuse a torturous path within the PEI chains.

"By switching from the standard three-dimensional membrane to a layered polymer structure we achieved gas separation over the Robeson limit in a membrane only 100nm thick," said Professor Vincenzo Palermo, coordinator of the team performing this research and Vice-Director of the Graphene Flagship.

Importantly, it was also found that the permeability of these membranes to different gasses depends strongly on the diameter of the gas molecules. This gives to the membrane a unique selectivity that eventually provides the gas separation technique with both tuneable permeability and high selectivity as well as the potential to be used on the large scale. The increased functionality to the inexpensive PEI films makes these gas separation membranes very attractive for applications.

"Through our collaboration with the University of Bologna and Graphene-XT within the Flagship, we have been able to assess the scalable nature of this research in industrial plants to gasses," said Palermo.

"The authors bring to a new level the concept of two-dimensional composites structures. They managed to produce periodic stacks of layered materials and one-dimensional polymers, on large areas, using weak electrostatic forces. In this way they observe a gas permeation process much different from what is observed in "classic" stacks of two-dimensional nanosheets," said Xinliang Feng, the leader of the Graphene Flagship's Functional Foam and Coatings Work-Package, "This work demonstrates the power and versatility of chemical approaches to build complex structures; noteworthy, it also comes from a collaboration of the Functional Foam and Coatings Work-Package partners with a partner SME supporting our spearhead projects."

Professor Andrea C. Ferrari, Science and Technology Officer of the Graphene Flagship, and Chair of its Management Panel, added "This is another example of how the Graphene Flagship can combine the cutting edge of research with practical applications. The potential of and related materials in technology was recognised early on, and this work brings it a step closer to widespread applications."

Explore further: Graphene water filter turns whisky clear

More information: Davide Pierleoni et al. Selective Gas Permeation in Graphene Oxide–Polymer Self-Assembled Multilayers, ACS Applied Materials & Interfaces (2018). DOI: 10.1021/acsami.8b01103

Related Stories

Graphene water filter turns whisky clear

November 14, 2017

Previously graphene-oxide membranes were shown to be completely impermeable to all solvents except for water. However, a study published in Nature Materials, now shows that we can tailor the molecules that pass through these ...

Heat-dissipating shoes with graphene soles

November 2, 2017

The ability of graphene to add functionality to common objects has been exploited in footwear with better thermal properties. Developed by Graphene Flagship partners Istituto Italiano di Tecnologia, Italy, in collaboration ...

Graphene coated motorcycle helmet launched

November 25, 2016

The Graphene Flagship presents an early success story in translating graphene's properties to marketable technologies. This autumn sees the commercial launch of a motorcycle helmet that benefits from the inclusion of graphene. ...

Recommended for you

Solution for next generation nanochips comes out of thin air

November 19, 2018

Researchers at RMIT University have engineered a new type of transistor, the building block for all electronics. Instead of sending electrical currents through silicon, these transistors send electrons through narrow air ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.