The world's first all-silicon laser

January 18, 2018, Science China Press
(a) A schematic image of DFB Si laser; Inset: photograph of a fabricated DFB device. (b) Emission spectra of the Si laser as a function of pump power; Background: a cross-sectional SEM image of the DFB structure. Credit: Science China Press

Integrated silicon photonics incorporates microelectronics and optoelectronics, a combination expected to revolutionize a variety of fields such as communication, sensing, lighting, displays, imaging and detection. Silicon lasers are the key to achieve integrated silicon photonics. However, the optical gains of silicon are lower than those of III-V compound semiconductors by one order of magnitude or two, due to its indirect bandgap feature. Although the fabrication of matured III-V compound lasers on silicon substrates has been proposed to circumvent this problem, the development of all-silicon laser is desired for integrated silicon photonics due to better compatibility with modern silicon techniques.

Recently, a joint research team led by Prof. X. Wu, Prof. M. Lu and associate Prof. S.-Y. Zhang from Fudan University developed the world's first all- laser using silicon nanocrystals with high optical gains. First, they enhanced the silicon emission intensity greatly by developing a film growth technique for high-density silicon nanocrystals (Physica E, 89, 57-60(2017)). Then they developed a high-pressure low-temperature passivation approach, which contributed to a full saturation of dangling bonds, leading to increased optical gains that were comparable to those achieved by gallium arsenide (GaAs) and indium phosphide (InP). On this basis, they designed and fabricated distributed feedback (DFB) resonance cavities and successfully achieved optically pumped all-silicon DFB lasers. The optically pumped all-silicon laser also paves the way towards the realization of electrically pumped all-silicon laser.

The optical gain of silicon nanocrystals was constantly enhanced as the passivation proceeded and eventually reached the value comparable to those of GaAs and InP. Lasing characteristics—the threshold effect, the polarization dependence, the significant spectral narrowing and small spread of divergence angle of stimulated emission—were fulfilled, suggesting the realization of an optically pumped all-silicon laser. The lasers also showed reliable repeatability. The lasing peaks of the four additional samples made under similar fabrication conditions were within the spectral range of 760 nm to 770 nm. The variation in the lasing peak was due to the slight difference in effective refractive indices. The full-width-at-half-maximum (FWHM) of the emission peak was narrowed from ~120 nm to 7 nm when the was pumped above threshold.

Explore further: Alternative fabrication scheme for microscale semiconductor lasers

More information: Dong-Chen Wang et al, An all-silicon laser based on silicon nanocrystals with high optical gains, Science Bulletin (2018). DOI: 10.1016/j.scib.2018.01.006

Related Stories

Researchers develop hybrid silicon evanescent laser

November 15, 2005

In what promises to be an important advance, researchers at the University of California, Santa Barbara have developed a novel laser by bonding optical gain layers directly to a silicon laser cavity. This hybrid laser offers ...

Researchers develop powerful, silicon-based laser

September 29, 2014

A silicon-based laser that lases up to a record 111°C, with a threshold current density of 200 A/cm2 and an output power exceeding 100 mW at room temperature, has been demonstrated by collaborating researchers from University ...

Recommended for you

Researchers study interactions in molecules using AI

October 19, 2018

Researchers from the University of Luxembourg, Technische Universität Berlin, and the Fritz Haber Institute of the Max Planck Society have combined machine learning and quantum mechanics to predict the dynamics and atomic ...

Pushing the extra cold frontiers of superconducting science

October 18, 2018

Measuring the properties of superconducting materials in magnetic fields at close to absolute zero temperatures is difficult, but necessary to understand their quantum properties. How cold? Lower than 0.05 Kelvin (-272°C).

The big problem of small data: A new approach

October 18, 2018

Big Data is all the rage today, but Small Data matters too! Drawing reliable conclusions from small datasets, like those from clinical trials for rare diseases or in studies of endangered species, remains one of the trickiest ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.