Light can 'heal' defects in some solar cells

May 24, 2016 by David L. Chandler, Massachusetts Institute of Technology
A sample of the mineral perovskite is shown in the foreground, while behind it is an image the researchers used to prove the effects of intense light on a thin film of perovskite. Fluorescence imaging shows that areas that received more light became more purified, as revealed by brighter fluorescence from those regions. Credit: MIT News. Fluorescence image courtesy of the researchers.

A family of compounds known as perovskites, which can be made into thin films with many promising electronic and optical properties, has been a hot research topic in recent years. But although these materials could potentially be highly useful in applications such as solar cells, some limitations still hamper their efficiency and consistency.

Now, a team of researchers at MIT and elsewhere say they have made significant inroads toward understanding a process for improving perovskites' performance, by modifying the material using . The new findings are being reported in the journal Nature Communications, in a paper by Samuel Stranks, a researcher at MIT; Vladimir Bulovic, the Fariborz Maseeh (1990) Professor of Emerging Technology and associate dean for innovation; and eight colleagues at other institutions in the U.S. and the U.K. The work is part of a major research effort on being led by Stranks, within MIT's Organic and Nanostructured Electronics Laboratory.

Tiny defects in perovskite's crystalline structure can hamper the conversion of light into electricity in a solar cell, but "what we're finding is that there are some defects that can be healed under light," says Stranks, who is a Marie Curie Fellow jointly at MIT and Cambridge University in the U.K. The tiny defects, called traps, can cause electrons to recombine with atoms before the electrons can reach a place in the crystal where their motion can be harnessed.

Under intense illumination, the researchers found that iodide ions—atoms stripped of an electron so they carry an electric charge—migrated away from the illuminated region, and in the process apparently swept away most of the defects in that region along with them.

"This is the first time this has been shown," Stranks says, "where just under illumination, where no [electric or magnetic] field has been applied, we see this ion migration that helps to clean the film. It reduces the defect density." While the effect had been observed before, this work is the first to show that the improvement was caused by the ions moving as a result of the illumination.

This work is focused on particular types of the material, known as organic-inorganic metal halide perovskites, which are considered promising for applications including solar cells, light-emitting diodes (LEDs), lasers, and light detectors. They excel in a property called the photoluminescence quantum efficiency, which is key to maximizing the efficiency of . But in practice, the performance of different batches of these materials, or even different spots on the same film, has been highly variable and unpredictable. The new work was aimed at figuring out what caused these discrepancies and how to reduce or eliminate them.

Stranks explains that "the ultimate aim is to make defect-free films," and the resulting improvements in efficiency could also be useful for applications in light emission as well as light capture.

Previous work reducing defects in thin-film perovskite materials has focused on electrical or chemical treatments, but "we find we can do the same with light," Stranks says. One advantage of that is that the same technique used to improve the material's properties can at the same time be used as a sensitive probe to observe and better understand the behavior of these promising materials.

Another advantage of this light-based processing is it doesn't require anything to come in physical contact with the film being treated—for example, there is no need to attach electrical contacts or to bathe the material in a chemical solution. Instead, the treatment can simply be applied by turning on the source of illumination. The process, which they call photo-induced cleaning, could be "a way forward" for the development of useful perovskite-based devices, Stranks says.

The effects of the tend to diminish over time, Stranks says, so "the challenge now is to maintain the effect" long enough to make it practical. Some forms of perovskites are already "looking to be commercialized by next year," he says, and this research "raises questions that need to be addressed, but it also shows there are ways to address" the phenomena that have been limiting this material's performance.

Explore further: Simpler processing improves solar cells

More information: "Photo-induced halide redistribution in organic-inorganic perovskite films." Nature Communications, doi.org/10.1038/ncomms11683

Related Stories

Simpler processing improves solar cells

May 18, 2016

By simplifying the process used to make a promising type of solar cell, A*STAR researchers have also improved the device's performance. The discovery may lead to better manufacturing methods for the commercialization of solar ...

Recommended for you

Bio-renewable process could help 'green' plastic

January 19, 2018

When John Wesley Hyatt patented the first industrial plastic in 1869, his intention was to create an alternative to the elephant tusk ivory used to make piano keys. But this early plastic also sparked a revolution in the ...

Simulations show how atoms behave inside self-healing cement

January 19, 2018

Researchers at Pacific Northwest National Laboratory (PNNL) have developed a self-healing cement that could repair itself in as little as a few hours. Wellbore cement for geothermal applications has a life-span of only 30 ...

Looking to the sun to create hydrogen fuel

January 18, 2018

When Lawrence Livermore scientist Tadashi Ogitsu leased a hydrogen fuel-cell car in 2017, he knew that his daily commute would change forever. There are no greenhouse gases that come out of the tailpipe, just a bit of water ...

A new polymer raises the bar for lithium-sulfur batteries

January 18, 2018

Lithium-sulfur batteries are promising candidates for replacing common lithium-ion batteries in electric vehicles since they are cheaper, weigh less, and can store nearly double the energy for the same mass. However, lithium-sulfur ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.