Taking a close look at metal 3-D printing

March 21, 2016 by Hannah Diorio-Toth, Carnegie Mellon University Mechanical Engineering
Credit: Carnegie Mellon University Mechanical Engineering

In the wee hours of a Saturday morning, Carnegie Mellon University Professor of Materials Science and Engineering Tony Rollett and graduate students Ross Cunningham and Tugce Ozturk sit together in Sector 2 of the mile-wide Advanced Photon Source at the Argonne National Laboratory in Chicago, Illinois. In front of them is an enormous synchrotron x-ray machine, powerful enough to see through heavy metals down to miniscule detail—one millionth of a meter, roughly one hundredth of a human hair. The unique equipment is in such high demand that the team has just forty-eight continuous hours to use the x-rays before they will pack up and (gingerly) carry their data back to Pittsburgh.

Scientists who are able to secure research time with the synchrotron study the internal structure of a wide variety of materials including polymers, biomedical biopsies, and alloys. The synchrotron takes detailed, 3-D images that are used to characterize and understand materials. The images are so precise, in fact, that researchers often turn to synchrotron technology to study fossils to identify ancient insects that can barely be seen under a microscope.

Instead of leveraging this powerful technology to learn about ancient materials, Rollett's group hopes to gain insight about something novel: 3-D printed metals.

By looking deep inside thin slices of 3-D printed titanium parts, the group examined defects in the printed metal that are invisible to the naked eye and difficult to detect even with current laboratory-grade equipment. These defects, called pores, make the part more susceptible to breakage when the part is exposed to repeated weight or stress. Potential for breakage might not be such a big deal for your 3-D printed toothbrush holder, but it is significantly more important when it comes to a 3-D printed part for a jet engine.

"Carnegie Mellon is bringing really unique research to the table because we are one of the only universities chasing after advanced characterization techniques in the metals 3-D printing space," says Rollett, who has spent much of his career specializing in materials microstructure and properties such as fatigue.

Although 3-D printing, or , is currently being used for rapid prototyping, it has its sights set on becoming the mainstream manufacturing process for grander applications, such as aerospace parts, custom biomedical implants, and high performance automobiles.

Improving the internal structure of 3-D printed metal parts is one of the several challenges that need to be met in order for this manufacturing process to be adopted in a more mainstream way. Rollett's team, in collaboration with Professor of Mechanical Engineering Jack Beuth, recently published a paper in the Journal of Minerals, Metals, and Materials Society, which showed that a majority of the porosity in 3-D printed titanium could be eliminated by making adjustments to the process parameters of the machine. Less porosity means stronger, more reliable end-parts.

"Having a strong understanding of the fundamental science of additive manufacturing materials is necessary in order to use them in aerospace and other demanding applications," says Beuth. "The ability to visualize porosity and flaws in 3-D with such high precision is a breakthrough capability in additive research."

Rollett and his team plan to continue their research to determine if it is possible to eliminate all remaining porosity from 3-D printed titanium and other metals. This is a particularly important goal because it is currently thought that some amount of porosity will always exist in 3-D printed materials.

"In a conventional material like steel, there aren't any of these pores. Besides that, you work so hard to avoid any sort of nonmetallic inclusion," says Rollett. "In additive manufacturing materials, there they are. You have to figure out how to understand them and deal with them. It is a new challenge the field of ."

Carnegie Mellon's NextManufacturing Center, where Beuth serves as director and Rollett as associate director, has focused its attention on science projects such as this one. As one of the world's leading research centers for additive manufacturing, the center is working to advance the field of additive manufacturing by meeting the research challenges of the industry.

Rollett's research at the Argonne National Laboratory consisted of his team working non-stop for two days. Samples needed to be moved or changed at constant two-minute intervals. But for graduate students like Cunningham and Ozturk, it was the excitement around the research that was remembered.

"I had no idea I would have the opportunity to do this kind of research as a graduate student. The equipment that I got to use, from an engineering standpoint, was really amazing," says Cunningham. Ozturk eagerly adds, "You're collecting super unique data that no one has ever collected or looked at before."

Explore further: Novel 3-D printing process enables metal additive manufacturing for consumer market

More information: Cunningham, Ross, Sneha P. Narra, Tugce Ozturk, Jack Beuth, and A. D. Rollett. "Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography." JOM 68.3 (2016): 765:71.

Related Stories

Video: Additive manufacturing—3-D printing beyond plastic

July 28, 2015

At Virginia Polytechnic Institute and State University (VT), Christopher Williams heads the effort to further advance 3-D printing—known among engineers as additive manufacturing—with copper, a widely used conductor in ...

Breakthrough achieved in ceramics 3D printing technology

January 4, 2016

Researchers at HRL Laboratories, LLC, have achieved a new milestone in 3D printing technology by demonstrating an approach to additively manufacture ceramics that overcomes the limits of traditional ceramic processing and ...

Molten glass 3-D printer produces optically transparent glass

August 25, 2015

A new additive manufacturing technique uses an innovative process for printing molten glass at sufficiently high temperatures, layering it to produce strong 3D-printed glass objects able to transmit light. The modular, scalable ...

Australia's first 3-D printed spine implant

November 19, 2015

RMIT University in Melbourne has worked with a medical device company and a neurosurgeon to successfully create a 3D printed vertebral cage for a patient with severe back pain.

Amazing future for 3D printing with ESA

October 17, 2013

3D printing is getting ready to revolutionise space travel. ESA is paving the way for 3D-printed metals to build high-quality, intricate shapes with massive cost savings.

Recommended for you

Galactic center visualization delivers star power

March 21, 2019

Want to take a trip to the center of the Milky Way? Check out a new immersive, ultra-high-definition visualization. This 360-movie offers an unparalleled opportunity to look around the center of the galaxy, from the vantage ...

Ultra-sharp images make old stars look absolutely marvelous

March 21, 2019

Using high-resolution adaptive optics imaging from the Gemini Observatory, astronomers have uncovered one of the oldest star clusters in the Milky Way Galaxy. The remarkably sharp image looks back into the early history of ...

Physicists reveal why matter dominates universe

March 21, 2019

Physicists in the College of Arts and Sciences at Syracuse University have confirmed that matter and antimatter decay differently for elementary particles containing charmed quarks.

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Mar 22, 2016
> one millionth of a meter, roughly one hundredth of a human hair

Why does this kind of article always use the width of a human hair as a comparison for small things? I have no idea how thin is a human hair. Also why saying "one millionth of a meter" instead of the very well known words "micrometre" or "micron"?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.