3D-printed food to help patients with dysphagia

October 26, 2015, CORDIS
3D-printed food to help patients with dysphagia

Labelled by some as the future of food, 3D printed meals could soon make it to our plates. The EU-funded PERFORMANCE project just presented its vision of this future in Brussels, with a 3D printed meal for elders facing swallowing and masticating difficulties.

NASA is not the only organisation in the world interested in printing. Whilst the concept could indeed be a must-have for astronauts on their future trip to Mars, it also arouses interest in Earth-focused sectors. For food producers, 3D food printing evokes unlimited customisation potential for their products, as well as unique food formulations for specific dietary needs.

The latter was one of the main targets of PERFORMANCE, a EUR 3 million project that developed a novel nutrition concept for the elders suffering from dysphagia – chewing and swallowing difficulties generally resulting for a stroke or dementia. And many of the innovative solutions developed as part of PERFORMANCE – from data software for meal details to unique active packaging – are now primed for commercialisation.

The PERFORMANCE concept

Unlike current dysphagia diets, which are mostly based on purée and pre-mashed food and result in loss of appetite, eventually leading to malnutrition, the PERFORMANCE concept replicates the look and taste of 'real' food and it to each patient's needs. The project team explains that 'puréed and strained food is brought back into its original shape, providing the same texture and look, and provides additional health benefits.'

The food is enriched with specific nutrients based on each patient's size, weight, gender and deficiencies, and these can be adjusted to ensure that the diet is always well-balanced. This process is fully automated, thanks to an algorithm created by German IT company Sanalogic: it monitors the nutritional status of each patient and automatically enriches the meals of subsequent orders on a weekly basis. The project team predicts that the full personalisation of food, which has now been advanced by the work of PERFORMANCE, will be an automatic reality in an era of Industry 4.0.

The best-possible clone

Getting as close to the original food shape was one of the main challenges faced by the project team. 'Printed puréed food needs to be firm after printing, but liquid enough to dispense from the printing heads,' explains Pascal de Grood, founder and CEO of project partner Foodjet. 'We use a printing technology based on jet printing. A gelling agent supports the shaping of the puréed and strained food. On the one hand the gelling agent needs to be compatible with the printing system, while on the other hand the printing system must support food matrices such as meat, carbohydrate and vegetables.' The system uses only natural ingredients along with a natural texturiser to make the printed meal as close as possible to the real thing.

Every detail has been taken into account, even beyond the food itself. To avoid the hot and cold spots resulting from food heating in a microwave, the Danish Technological Institute and Italian partners FEMTO and University of Pisa developed 'active packaging' – a split plate with perforated micro-wave reflectors placed on top and underneath it.

Putting the PERFORMANCE taste to the test

The PERFORMANCE concept is already being tested by the target market – consumer tastings were carried out in care homes just last week. Project manager Sandra Forstner from biozoon food innovations presented some preliminary results at Friday's final project conference: 'This week we went back to nursing homes to prove and validate the concept, and we have had some positive preliminary results so far.' The tastings tested the whole PERFORMANCE system – from ordering personalised meals using the specially developed software to the production and delivery of prototype food products which were reheated and served in the care home. Preliminary results show a generally positive reaction to the meal's shape, appearance and taste: 54 % of respondents rated the meal's texture as good, 79 % found meals equally heated and 43 % would choose the PERFORMANCE meal in the case of swallowing or chewing difficulties.

Bringing PERFORMANCE to market

In terms of commercialisation, project coordinator Matthias Kück, also from biozoon, acknowledges that 3D food printing has some way to go until it becomes a viable commercial process however he notes that the PERFORMANCE team is working on 'making the necessary breakthrough'. And although this means that it may be some time before the entire PERFORMANCE concept can be implemented, the individual solutions developed won't be back on the shelf gathering dust – quite the opposite in fact. Kück assured participants at the final conference, 'Even if PERFORMANCE is not implemented on the market immediately, you can expect many of the products developed within PERFORMANCE to be commercialised as single stand alone solutions very soon.'

Explore further: 3-D food printing to the rescue of gastronomy for seniors with chewing or swallowing problems

More information: For further information, please visit PERFORMANCE project website: www.performance-fp7.eu/

Related Stories

3-D printing of microwave circuits

October 15, 2015

The National Physical Laboratory (NPL) has recently assisted Imperial College London to investigate the design, fabrication and testing of waveguides manufactured using 3D-printing techniques, by providing the underpinning ...

Robotic exoskeleton to help heal hand injuries

October 19, 2015

Curtin University researchers have developed an innovative robotic hand exoskeleton which can be made cheaply using a 3D printer and could potentially cut down on rehabilitation visits for patients.

Beef vs. bean meals: Both provide similar feeling of fullness

September 18, 2015

Today vegetarians aren't the only group of consumers looking for foods that are meat-free and provide a satisfying meal. All types of consumers are looking to manage and maintain weight with plant-based meal options with ...

To print or not to print your meal

August 4, 2015

What about a more chewable pasta or high protein cookies made with insects? 3D printed food seems an interesting solution for healthier eating, shortening meal preparation times and even fighting world hunger. But an avant-garde ...

Recommended for you

Matter waves and quantum splinters

March 25, 2019

Physicists in the United States, Austria and Brazil have shown that shaking ultracold Bose-Einstein condensates (BECs) can cause them to either divide into uniform segments or shatter into unpredictable splinters, depending ...

How tree diversity regulates invading forest pests

March 25, 2019

A national-scale study of U.S. forests found strong relationships between the diversity of native tree species and the number of nonnative pests that pose economic and ecological threats to the nation's forests.

Study suggests trees are crucial to the future of our cities

March 25, 2019

The shade of a single tree can provide welcome relief from the hot summer sun. But when that single tree is part of a small forest, it creates a profound cooling effect. According to a study published today in the Proceedings ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.