Researchers develop novel method for making electrical cellulose fibers

October 1, 2014 by Adam Jones, University of Alabama in Tuscaloosa
The inventors of the patent include, front row from left, Drs. Anwarul Haque and Rachel Frazier along with, back row from left, Dan Daly, Scott Spear and Robin Rogers.

By using liquid salts during formation instead of harsh chemicals, fibers that conduct electricity can be strengthened, according to a patent issued to a team of researchers at The University of Alabama.

The new method of crafting the could open up normally flimsy materials, such as cotton, to in technologies normally reserved for stronger fibers.

The process could also make conductive polymer composites, as they are called, less expensive to prepare with fewer harmful environmental side-effects.

Conductive polymers have wide-ranging physical and electrical properties. They are used in applications from organic transistors, coatings for fuel cells, and electromagnetic shielding.

However, the process for making conductive polymer composites such as electrically-conductive cotton, wool or nylon is difficult since the mechanical properties, or its strength, are weakened during preparation.

The inventors of the patent are Dr. Scott Spear, a research engineer with UA's Alabama Innovation and Mentoring of Entrepreneurs, known as AIME; Dr. Anwarul Haque, associate professor of aerospace engineering and mechanics; Dr. Robin Rogers, the Robert Ramsay Chair of Chemistry at UA and director of UA's Center for Green Manufacturing; Dr. Rachel Frazier, a research engineer at AIME, and Dr. Dan Daly, director of AIME.

The UA researchers worked with polypyrrole, a particularly useful conductive polymer that can be difficult to bind to fibers. To turn the base chemical, pyrrole, into a polymer that can conduct electricity, polypyrrole, it is put through a chemical process using methanol and the iron-containing ferric chloride. Methanol, sometimes called wood alcohol, is a volatile organic compound that is highly toxic to humans.

Drs. Spear, left, and Haque discuss their work while examining a spool of cellulose fiber with polypyrrole in a lab at The University of Alabama.

Polypyrrole made through this method, though, does not stick well to fibers such as cotton. To bind the fibers with the polypyrrole they are dipped in an acidic solvent that degrades the fiber to increase the surface area so the polypyrrole can stick. This degradation, though, weakens the fiber.

The patented method developed at UA would retain much of the fibers strength by using ionic liquids, which are liquid salts at or near room temperature with low volatility that carry an electric charge. The ionic liquids do not degrade the fibers as much, and the process creates nanostructures that result in a stronger composite material. It also makes the composite better at conducting electricity.

The ionic liquids cannot only be used to fabricate conductive , but can be used in place of other solvents to create the polypyrrole.

"We get a better absorption of iron on a cotton or nylon fiber in the presence of ionic liquids," Spear said.

The process is potentially cheaper and environmentally cleaner since using ionic liquids results in much less harmful by-products from the chemical reaction.

"A lot of effort has been made into making cellulose fibers conductive through chemical methods that, from a manufacturing standpoint, are not environmentally friendly," Haque said. "Our process does away with the use of methanol through the novel use of , which, by their very nature, have a low volatility that essentially eliminates environmental release pathways exhibited by methanol."

The patented process could impact what are known as smart textiles, clothing often with traditional electronic features woven into the fabric. The UA-developed method, though, could make it easier for the clothing itself to transmit the electric signals. Smart textiles could be employed in protective clothing, medical textiles and other applications foreseen in military, sports, medical, industrial as well as consumer products

"In the future, cloth or fabrics will not only protect the wearer, but also have intelligent built-in features, such as multifunctional sensors or computing devices," Spear said. "Conductive cotton fiber represents an important component in the development of smart materials for a variety of military, industrial and commercial applications."

Explore further: Shrimp, 30,000 volts help UA start-up land $1.5 million for uranium extraction

Related Stories

Cotton computing goes live at Cornell textiles lab

December 30, 2011

(PhysOrg.com) -- Researchers from France, Italy and the United States are weaving cotton with transistors for a new look in computing. Based on news about a lab at Cornell University, wearable computing is getting a new twist. ...

Transistors are made from natural cotton fibers

October 27, 2011

(PhysOrg.com) -- Smarter, more functional clothing incorporating electronics may be possible in the near future, according to a study co-authored by Cornell fiber scientist Juan Hinestroza.

Wearing Your Wireless

May 21, 2007

Movies and television have educated us more than we know. Thanks to detective thrillers, we understand about the drama of "wearing a wire." But a NASA-sponsored technology is paving the way for all of us to be "wearing a ...

Researchers at UA developing next-gen conductive polymers

December 23, 2010

(PhysOrg.com) -- Conductive polymers, while not quite wonder materials, have the potential for being so and University of Akron polymer scientists and polymer engineers are focused on developing the next generation of the ...

Ionic liquid boosts efficiency of CO2 reduction catalyst

June 9, 2014

(Phys.org) —Wouldn't it be nice to use solar- or wind-generated electricity to turn excess carbon dioxide—one of the gases trapping heat in Earth's atmosphere—into fuels and other useful chemicals? The process would ...

Recommended for you

Simulations show how beta-amyloid may kill neural cells

May 25, 2018

Beta-amyloid peptides, protein fragments that form naturally in the brain and clump into plaques in Alzheimer's disease patients, are thought to be responsible for neuron death, but it hasn't been clear how the substances ...

The changing shape of DNA

May 24, 2018

The shape of DNA can be changed with a range of triggers including copper and oxygen—according to new research from the University of East Anglia.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.