Ultralow-power memory uses orders of magnitude less power than other devices

Aug 26, 2010 By Lisa Zyga feature
The device structure and energy level diagram of the WORM memory, which can be programmed at power densities that are orders of magnitude lower than previously reported ultralow-power WORM devices. Image credit: Wang, et al. ©2010 American Institute of Physics.

(PhysOrg.com) -- As RFID tags are becoming more widespread for tracking and identifying almost anything, researchers are continuing to develop cheap, ultralow-power memory devices for these applications. In a recent study, scientists from Cambridge have taken another step forward in this area by developing a write-once-read-many-times (WORM) memory device that requires just a fraction of the power needed by previous devices. In principle, the low-power memory can be used in any organic electronic circuit where the operation power is low.

The researchers, Jianpu Wang, Feng Gao, and Neil Greenham from the Cavendish Laboratory at Cambridge, have published their study in a recent issue of . As the scientists explain, require a that can be programmed and read using only the small amount of power taken from the field. In addition to requiring a very low current consumption and operating voltage, disposable RFIDs also require memory devices that are inexpensive.

The Cambridge researchers’ WORM memory satisfies both these requirements. The electron-only design is fabricated by solution processing, making it less expensive than other techniques, such as those that require . To write data, the device uses ZnO semiconductor nanoparticles to inject into a conducting polymer. The injected electrons can be used to program the memory by permanently decreasing the conductivity of the polymer, producing an insulating state. The researchers demonstrated that the devices could be programmed at power densities of less than 0.1 W/cm2, which is orders of magnitude lower than previously reported ultralow-power WORM devices, which typically require at least 10 W/cm2.

The scientists explain that the low power of the devices is a consequence of the efficiency of the injected electrons in dedoping the previously doped polymer. The conducting polymer, called PEDOT:PSS, is already positively doped (with PSS), giving it a positive charge. When the electrons are injected by the nanoparticles, they dedope the polymer, reducing its conductivity.

“By using the wide bandgap ZnO nanoparticles, the electron-only device structure allows us to block the hole current,” Wang told PhysOrg.com. “Meanwhile, the injected electrons can dedope the PEDOT effectively, leading to an insulating state.”

Although the researchers are still investigating the details of the dedoping mechanism, their experiments show that water in the polymer film, which may be absorbed from the atmosphere, plays an important role in the dedoping process. In experiments performed under a nitrogen atmosphere, the low power density could not permanently change the polymer’s conductivity. The researchers also hope to make some further improvements to the device.

“The current structure still requires a thermal evaporation process to deposit metal electrodes,” Wang said. “Our ongoing research is to make an entirely solution-processed low-power WORM. We currently have some encouraging results on these extremely low-cost, low-power WORM devices.”

Explore further: Breakthrough in flexible electronics enabled by inorganic-based laser lift-off

More information: Jianpu Wang, Feng Gao, and Neil C. Greenham. “Low-power write-once-read-many-times memory devices.” Applied Physics Letters 97, 053301 (2010). DOI:10.1063/1.3473775

4 /5 (12 votes)

Related Stories

Organic flash memory developed

Dec 17, 2009

(PhysOrg.com) -- Researchers at the University of Tokyo have developed a non-volatile memory that has the same basic structure as a flash memory but is made from cheap, flexible, organic materials.

Recommended for you

Cooling with the coldest matter in the world

Nov 24, 2014

Physicists at the University of Basel have developed a new cooling technique for mechanical quantum systems. Using an ultracold atomic gas, the vibrations of a membrane were cooled down to less than 1 degree ...

Magnetic fields and lasers elicit graphene secret

Nov 24, 2014

Scientists at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) have studied the dynamics of electrons from the "wonder material" graphene in a magnetic field for the first time. This led to the discovery of ...

New 2-D quantum materials for nanoelectronics

Nov 21, 2014

Researchers at MIT say they have carried out a theoretical analysis showing that a family of two-dimensional materials exhibits exotic quantum properties that may enable a new type of nanoscale electronics.

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.