'Dark Pulse Laser' produces bursts of... almost nothing

Jun 09, 2010
Colorized trace of pulses from the NIST/JILA "dark pulse" laser, indicating the light output nearly shuts down about every 2.5 nanoseconds. Credit: Talbott/NIST

In an advance that sounds almost Zen, researchers at the National Institute of Standards and Technology and JILA, a joint institute of NIST and the University of Colorado at Boulder, have demonstrated a new type of pulsed laser that excels at not producing light. The new device generates sustained streams of "dark pulses" -- repeated dips in light intensity -- which is the opposite of the bright bursts in a typical pulsed laser.

Despite its ominous name, the dark pulse is envisioned as a tool for benign communications and measurements based on infrared light frequencies. The laser's ultrashort pulses span just 90 picoseconds (trillionths of a second), making the device suitable for measurements on short timescales. Dark pulses might be useful in signal processing because, unlike bright pulses, they generally propagate without distortion. Dark pulses might be used like a camera shutter for a continuous in optical networks.

Described in Optics Express, the new NIST/JILA technology is the first to generate dark pulses directly from a semiconductor laser cavity, without electrical or optical shaping of pulses after they are produced. The chip-sized generates light from millions of (qdots), nanostructured grown at NIST. Quantum dot lasers are known for unusual behavior.

In the new NIST/JILA laser, small electrical currents are injected into the laser, causing the qdots to emit light. The qdots are all about the same size—about 10 nanometers (billionths of a meter) wide—and thus, because of a nanostructured design that makes them behave like individual atoms, all emit light at the same frequency. The current generates enough energy to amplify the emissions from the collective dots, creating the special properties of laser light.

The new laser depends on the qdots' unusual energy dynamics, which have the effect of stabilizing dark pulses. After emitting light, qdots recover energy from within rapidly (in about 1 picosecond) but more slowly (in about 200 picoseconds) from energy inputs originating outside the qdots in the laser cavity. This creates a progression of overall energy gains gradually giving way to overall energy losses. Eventually, the laser reaches a steady state of repeated brief intensity dips—a drop of about 70 percent—from the continuous light background.

The dark pulse laser was developed through close collaborations between NIST experts in qdot growth and semiconductor laser design and fabrication, and JILA experts in ultrafast lasers and related measurements. NIST has ongoing research efforts to develop quantum dot lasers and to develop modeling, fabrication, and measurement methods for semiconductor nanostructures such as quantum dots. In general, semiconductor lasers are being considered for many advanced applications, such as next-generation atomic clocks based on optical frequencies, for which large lasers are costly and complex.

Explore further: Yellowstone's thermal springs—their colors unveiled

More information: M. Feng, K.L. Silverman, R.P. Mirin and S.T. Cundiff. Dark pulse laser. Optics Express. Published online June 7, 2010, as forthcoming.

Related Stories

Enhanced LIDAR improves range, vibration measures

Feb 02, 2006

Scientists at the National Institute of Standards and Technology have demonstrated the use of an ultrafast laser "frequency comb" system for improved remote measurements of distance and vibration. The technology, ...

Tiny spectrometer offers precision laser calibration

May 11, 2007

A tiny device for calibrating or stabilizing precision lasers has been designed and demonstrated at the National Institute of Standards and Technology. The prototype device could replace table-top-sized instruments ...

First Observation of an “Atomic Air Force”

Aug 19, 2004

The first sighting of atoms flying in formation has been reported by physicists at the Department of Commerce’s National Institute of Standards and Technology (NIST) and the University of Colorado at Boulder (CU-Boulder) in the Aug. ...

'Squeezing' light into quantum dots

Apr 01, 2009

(PhysOrg.com) -- “Quantum wells have been instrumental in telecommunications, enabling light amplification,” Patanjali Kambhampati tells PhysOrg.com, “but theory has suggested that a very small - colloidal - quantu ...

Recommended for you

Yellowstone's thermal springs—their colors unveiled

15 hours ago

Researchers at Montana State University and Brandenburg University of Applied Sciences in Germany have created a simple mathematical model based on optical measurements that explains the stunning colors of ...

User comments : 7

Adjust slider to filter visible comments by rank

Display comments: newest first

Mayday
Jun 09, 2010
This comment has been removed by a moderator.
maxcypher
not rated yet Jun 09, 2010
So in optical computation, would the dark pulse be a 0 and the light beam a 1?
winthrom
not rated yet Jun 09, 2010
what is the power of the pulse?
kevinrtrs
1 / 5 (1) Jun 10, 2010
Tech is developing so fast one can hardly keep up anymore. Time to get to know what's cooking in quantum dots......sigh....!
antialias
5 / 5 (1) Jun 10, 2010
So in optical computation, would the dark pulse be a 0 and the light beam a 1?

It doesn't matter (as long as you stick to your choice once you have made it)
taka
not rated yet Jun 10, 2010
The pulse is 0 AND 1 and the light is a SEPARATOR.
Chef
not rated yet Jun 10, 2010
Could the dark pulse be combined with a light pulse of same frequency to create three states of computation? Meaning the dark pulse (ie -1), the neutral state (0), and the light pulse generating (1).
darksoliton
not rated yet Jun 11, 2010
THIS is an interesting work on dark pulse. However, it is not that original as it said. Physical Review A, 80, 045803 (2009) reported the emission of dark pulse in fiber lasers laser year. THE cavity design is simpler than this one but with all fiber format and many other advantages. If you feel interested, you could see this paper through http://www3.ntu.e.../pra.pdf

Could the dark pulse be combined with a light pulse of same frequency to create three states of computation? Meaning the dark pulse (ie -1), the neutral state (0), and the light pulse generating (1).

darksoliton
Jun 11, 2010
This comment has been removed by a moderator.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.