NASA Tweaks Tech Toolbox to Capture Tricky Rotor Results

Jun 07, 2010 by Karen Jenvey
The Large Rotor Test Apparatus in the National Full-Scale Aerodynamics Complex. Image credit: NASA/Eric James

(PhysOrg.com) -- "Smooth" and "quiet" are two words not usually associated with a helicopter ride, but NASA is working to change that. A full-size UH-60A Blackhawk helicopter rotor was the subject of tests the agency's Subsonic Rotary Wing Project recently completed in collaboration with the U.S. Army and the U.S. Air Force at NASA's Ames Research Center in Moffett Field, Calif.

The test series, conducted from January to May 2010, was designed to gather data on the and air movement that the blades create. Since most helicopter noise and vibration can be blamed on the interactions between the blades and the air, the data will be extremely valuable to rotor researchers trying to understand these effects.

Ultimately, the data gathered in the tests can be used to design advanced helicopters in the future.

“NASA hopes to make those new designs quieter, faster, more fuel efficient, and capable of carrying more people and cargo,” said Tom Norman, the researcher for the project test team.

The test included routine flight conditions for the rotor, but also explored what happens if the rotor system is operated above and beyond its normal flight conditions. This included testing at very high speed and at conditions designed to simulate a much heavier helicopter, and provided data that will help NASA design that can fly faster speeds and carry more payload.

To obtain the data, NASA designed new measurement techniques for the rotor system and for the world's largest wind tunnel, the National Full-Scale Aerodynamic Complex, or NFAC, in which the rotor system was tested.

NASA researchers needed to develop techniques to make measurements over large distances both on and around the rotating blades, so they customized a system that uses laser light to measure the air flow without touching the blades. This technique, called , is commonly used, but not over areas this large. The blade area of 4 feet by 13 feet, approximately the size of two twin mattresses end to end, was the largest measurement area ever attempted using this technique.

A close-up view of the blade tip of the UH-60-A rotor that shows large round targets used for photogrammetry measurements; the small circular holes are pressure gages mounted in the blade. Image credit: NASA/Eduardo Solis

Researchers measured the wake of the rotor using a technique known as retro-reflective background oriented schlieren. This technique shoots light across the wind tunnel to visualize the air as it rotates and provides a complementary view of the rotor wake.

Rotor blades twist and turn in air as they spin, making it difficult to measure their movement. To avoid touching or interfering with the spinning blades, NASA used a third technique, called photogrammetry, to identify the blades’ shape, It employed high speed cameras to take pictures of small reflective targets on the blades and the ceiling.

On the rotor blade itself, more than 200 sensors were used to measure pressure that creates the rotor lift. Having so many sensors is difficult because the team has to keep all of the complex systems working to get accurate results.

“This was the most highly-instrumented rotor test ever conducted in the NFAC, and the team pushed the operation of the rotor system to its limits to acquire this unique data,” said Norman.

“Thanks to the hard work by the whole team, we were able to accomplish our goals,” said Norman.

Explore further: First drone in Nevada test program crashes in demo

add to favorites email to friend print save as pdf

Related Stories

Tilting at wind farms

Jan 07, 2009

A way to make wind power smoother and more efficient that exploits the inertia of a wind turbine rotor could help solve the problem of wind speed variation, according to research published in the International Journal of ...

Spirit Rover: Rear Wheel Trouble Continues

Dec 10, 2009

(PhysOrg.com) -- Results of diagnostic tests on Spirit's right-rear wheel on Sol 2109 (Dec. 8, 2009) continue to indicate a troubled wheel, which may leave the rover with only four operable wheels.

'Smart turbine blades' to improve wind power

May 01, 2009

Researchers have developed a technique that uses sensors and computational software to constantly monitor forces exerted on wind turbine blades, a step toward improving efficiency by adjusting for rapidly ...

Boeing A160 Hummingbird Completes Flight Test

Dec 06, 2005

Boeing has announced the A160 Hummingbird unmanned rotorcraft made its first test flight from an airfield near Victorville, Calif., Nov. 30. "This flight - the first with a six cylinder Subaru engine - is an ...

Recommended for you

Off-world manufacturing is a go with space printer

2 hours ago

On Friday, the BBC reported on a NASA email exchange with a space station which involved astronauts on the International Space Station using their 3-D printer to make a wrench from instructions sent up in ...

First drone in Nevada test program crashes in demo

19 hours ago

A drone testing program in Nevada is off to a bumpy start after the first unmanned aircraft authorized to fly without Federal Aviation Administration supervision crashed during a ceremony in Boulder City.

Fully automated: Thousands of blood samples every hour

Dec 19, 2014

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

Explainer: What is 4-D printing?

Dec 19, 2014

Additive manufacturing – or 3D printing – is 30 years old this year. Today, it's found not just in industry but in households, as the price of 3D printers has fallen below US$1,000. Knowing you can p ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.