Explosives prevent technology theft

Jun 25, 2009
This is researcher Guenter Helferich. Credit: Fraunhofer/Dirk Mahler

Product piracy causes billions worth of damage worldwide. A combination of visible and invisible copy protection is really effective against this. Explosive embossing is an economical procedure and can be used for mass-produced goods.

The holographic structure on the frisbee glistens colorfully. It is unique to this batch and makes the product forgery-proof. Explosives are used to emboss the original pattern into the injection moulding tool. This method can be used to give to industrial goods, and also mass-produced goods such as DVDs or medical pills and tablets. The patented technology was developed by Günter Helferich of the Fraunhofer Institute for Chemical Technology ICT in Pfinztal.

He will receive one of the 2009 Joseph von Fraunhofer prizes for developing an explosive embossing method for the holographic nano-structuring of steel surfaces, as a protection against plagiarism. The necessity for this is obvious - forged products account for approximately 10 per cent of total world trade volume. This not only destroys jobs - approximately 70,000 per year in Germany, according to the German Chamber of Industry and Commerce - but is also relevant to the question of product liability.

Explosive embossing makes it possible to imprint structures directly onto metal surfaces. This method can even be used to transfer the structures of soft holographic embossing templates - nickel shims - into mould inserts for injection moulding. Moulds structured in this way enable plastic products to be produced for the mass market with a clearly visible as a copy protection. This can be done during the production process of the original and without an additional production step. All components can be clearly identified by the 'fingerprint' moulded into the plastic. In addition, the use of conventional galvanic baths or etching baths can be reduced.

"The procedure is simple to describe," says Günter Helferich. "For the structuring, the to be worked on is covered with the object that is to be imprinted, the original structure. A thin film of explosive material is placed on this. When this is detonated the structure of the original is imprinted, accurate in every detail, onto the metal. The shock wave causes an additional increase in the hardness of the embossed metal." Achieving this result was not quite so simple - it depends on the combination of many parameters, the type of explosive material and the type of metal, the detonator position and the plugging of the explosive material - just to name a few. The explosive embossing of holographic structure templates cannot be copied - even if identical templates are used. Forgers of products will never be able to carry out a "complex" procedure such as embossing by means of detonation with complete accuracy of detail, making it the ideal piracy protection.

Source: Fraunhofer-Gesellschaft (news : web)

Explore further: Lifting the brakes on fuel efficiency

add to favorites email to friend print save as pdf

Related Stories

Holograms with explosive power

Mar 06, 2008

People who handle explosives usually have heavy-duty tasks to perform – dislodging rocks, demolishing old buildings, or triggering an avalanche. But explosives can be used for delicate tasks, too: They make ...

Printing of components with functional ink

Apr 08, 2005

Time is money - even in component manufacturing. Researchers can continuously print out three-dimensional metal parts using a rapid manufacturing process. The unique feature is that they can vary the material ...

3D laser structuring

May 29, 2007

Small structure, big impact. Micrometer-fine patterns in surfaces endow components with amazing properties: Plastic dashboards, for example, can be made to look like leather; sharkskin ribs on an aircraft’s ...

Electricity from a thin film

Feb 01, 2008

Teams of researchers all over the world are working on the development of organic solar cells. The Fraunhofer Institute for Solar Energy Systems ISE in Freiburg is presenting avenues towards industrial mass ...

Plastic as a conductor

Dec 02, 2008

(PhysOrg.com) -- Plastic that conducts electricity and metal that weighs no more than a feather? It sounds like an upside-down world. Yet researchers have succeeded in making plastics conductive and cutting ...

Recommended for you

Lifting the brakes on fuel efficiency

7 hours ago

The work of a research leader at Michigan Technological University is attracting attention from Michigan's Governor as well as automotive companies around the world. Xiaodi "Scott" Huang of Michigan Tech's ...

Large streams of data warn cars, banks and oil drillers

Apr 16, 2014

Better warning systems that alert motorists to a collision, make banks aware of the risk of losses on bad customers, and tell oil companies about potential problems with new drilling. This is the aim of AMIDST, the EU project ...

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

winthrom
5 / 5 (1) Jun 25, 2009
I understand that forged aircraft parts are a real safety problem. The FAA tags good parts (yellow tag), and bad ones (red tag) that are sometimes re-deployed as good by unscrupulous dealers. This process can ID each part uniquely, and permit an on-line "look-up" of the exact part in hand to see if it is airworthy.
fixer
not rated yet Jun 26, 2009
This trick was first discovered during WW2.
You can get the same affect by stamping with a hammer.
Neither technique can be told from the other by the domestic end user.
Dinotron
not rated yet Jun 26, 2009
How does this "prevent" technology theft? Products can still be made with a fake imprint and people will still buy them if they're cheaper.

@ winthrom, there is a surface hardening during the embossing process that may adversly effect aircraft parts so I think your suggestion would be difficult to impliment in a fool proof way.

More news stories

LinkedIn membership hits 300 million

The career-focused social network LinkedIn announced Friday it has 300 million members, with more than half the total outside the United States.

Researchers uncover likely creator of Bitcoin

The primary author of the celebrated Bitcoin paper, and therefore probable creator of Bitcoin, is most likely Nick Szabo, a blogger and former George Washington University law professor, according to students ...

Under some LED bulbs whites aren't 'whiter than white'

For years, companies have been adding whiteners to laundry detergent, paints, plastics, paper and fabrics to make whites look "whiter than white," but now, with a switch away from incandescent and fluorescent lighting, different ...

Magnitude-7.2 earthquake shakes Mexican capital

A powerful magnitude-7.2 earthquake shook central and southern Mexico on Friday, sending panicked people into the streets. Some walls cracked and fell, but there were no reports of major damage or casualties.

Plants with dormant seeds give rise to more species

Seeds that sprout as soon as they're planted may be good news for a garden. But wild plants need to be more careful. In the wild, a plant whose seeds sprouted at the first warm spell or rainy day would risk disaster. More ...

Researchers successfully clone adult human stem cells

(Phys.org) —An international team of researchers, led by Robert Lanza, of Advanced Cell Technology, has announced that they have performed the first successful cloning of adult human skin cells into stem ...