Researchers peer into nanowires to measure dopant properties

Apr 02, 2009
Atom-by-atom mapping of a germanium nanowire by atom probe tomography. Left: 3D reconstruction of an individual Ge nanowire with each green sphere representing an individual Ge atom. The dimensions are 50x50x100 nm3. The region enclosed by the red box is displayed at upper right, with single atomic planes visible in the center of the image. The grey spheres are phosphorous dopant atoms used to control the conductivity. (The dimensions are 5x25x15 nm3). The region enclosed by the blue box is displayed in the lower right, revealing an inhomogeneous distribution of phosphorous atoms. (The dimensions are 50x50x10 nm3). The 'shell' of enhanced doping results from surface reactions during growth of the nanowire.

(PhysOrg.com) -- Semiconductor nanowires -- tiny wires with a diameter as small as a few billionths of a meter — hold promise for devices of the future, both in technology like light-emitting diodes and in new versions of transistors and circuits for next generation of electronics. But in order to utilize the novel properties of nanowires, their composition must be precisely controlled, and researchers must better understand just exactly how the composition is determined by the synthesis conditions.

Nanowires are synthesized from elements that form bulk semiconductors, whose are in turn controlled by adding minute amounts of impurities called dopants. The amount of dopant determines the of the nanowire.

But because are so small — with diameters ranging from 3 to 100 nanometers — researchers have never been able to see just exactly how much of the dopant gets into the nanowire during synthesis. Now, using a technique called atom probe tomography, Lincoln Lauhon, assistant professor of materials science and engineering at Northwestern University's McCormick School of Engineering and Applied Science, has provided an view of the composition of a nanowire. By precisely measuring the amount of dopant in a nanowire, researchers can finally understand the synthesis process on a quantitative level and better predict the of nanowire devices.

The results were published online March 29 in the journal Nature Nanotechnology.

"We simply mapped where all the atoms were in a single nanowire, and from the map we determined where the dopant atoms were," he says. "The more dopant atoms you have, the higher the conductivity."

Previously, researchers could not measure the amount of dopant and had to judge the success of the synthesis based on indirect measurements of the conductivity of nanowire devices. That meant that variations in device performance were not readily explained.

"If we can understand the origin of the electrical properties of nanowires, and if we can rationally control the conductivity, then we can specify how a nanowire will perform in any type of device," he says. "This fundamental scientific understanding establishes a basis for engineering."

Lauhon and his group performed the research at Northwestern's Center for Atom Probe Tomography, which uses a Local Electrode Atom ProbeTM microscope to dissect single nanowires and identify their constituents. This instrumentation software allows 3-D images of the nanowire to be generated, so Lauhon could see from all angles just how the dopant atoms were distributed within the nanowire.

In addition to measuring the dopant in the nanowire, Lauhon's colleague, Peter Voorhees, Frank C. Engelhart Professor of Materials Science and Engineering at Northwestern, created a model that relates the nanowire doping level to the conditions during the nanowire synthesis. The researchers performed the experiment using germanium wires and phosphorous dopants — and they will soon publish results using silicon — but the model provides guidance for nanowires made from other elements, as well.

"This model uses insight from Lincoln's experiment to show what might happen in other systems," Voorhees says. "If nanowires are going to be used in device applications, this model will provide guidance as to the conditions that will enable us to add these elements and control the doping concentrations."

Both professors will continue working on this research to broaden the model.

"We would like to establish the general principles for doping semiconductor nanowires," Lauhon says.

More information: The paper is titled "Direct measurement of dopant distribution in an individual vapour-liquid-solid nanowire."

Source: Northwestern University (news : web)

Explore further: Study reveals new characteristics of complex oxide surfaces

add to favorites email to friend print save as pdf

Related Stories

Researchers shine light on atomic transistor

Nov 22, 2006

Researchers from TU Delft and the FOM Foundation (Netherlands) have successfully measured transport through a single atom in a transistor. This research offers new insights into the behaviour of so-called dopant ...

Nano World: Superior nanowire transistors

May 30, 2006

Transistors made with semiconductor wires just nanometers or billionths of a meter wide can exceed the performance of current state-of-the-art silicon transistors by three or four times, experts tell UPI's Nano World.

Recommended for you

A new way to make microstructured surfaces

2 hours ago

A team of researchers has created a new way of manufacturing microstructured surfaces that have novel three-dimensional textures. These surfaces, made by self-assembly of carbon nanotubes, could exhibit a ...

Tough foam from tiny sheets

22 hours ago

Tough, ultralight foam of atom-thick sheets can be made to any size and shape through a chemical process invented at Rice University.

Graphene surfaces on photonic racetracks

Jul 28, 2014

In an article published in Optics Express, scientists from The University of Manchester describe how graphene can be wrapped around a silicon wire, or waveguide, and modify the transmission of light through it.

User comments : 0