Scientists Create Light-Bending Nanoparticles

Mar 03, 2009 By Laura Mgrdichian feature
Directional scattering of an incoming electromagnetic wave by oriented nanocups. Image courtesy Nikolay Mirin, Rice University.

(PhysOrg.com) -- Metallic nanoparticles and other structures can manipulate light in ways that are not possible with conventional optical materials. In a recent example of this, Rice University researchers discovered that cup-shaped gold nanostructures can bend light in a controllable way. The cups act like three-dimensional nano-antennas.

The research is described in the February 19, 2008, online edition of Nano Letters.

When light interacts with nanoparticles and other tiny structures, many interesting and even dramatic physical effects can occur. For example, man-made "metamaterials" have very fine structures with features smaller than the wavelength of light, some just tens of atoms across, imparting them with unique and often intriguing optical behaviors. Metamaterials are of interest to scientists because they may be able to interact with light in ways that naturally occurring materials cannot.

The gold nanocups created in this research interact with light in two main ways: axially, the up-down direction, or transverse, the left-right direction. The transverse mode is by far the stronger of the two.

"When we illuminated the nanocups, the transverse interaction exhibited a strong scattering resonance," said Rice University researcher Naomi Halas, the study's corresponding scientist, to PhysOrg.com. She conducted the study with colleague Nikolay Mirin. "We learned that the direction of the transverse resonant light scattering depends on the orientation of the cups, a property that has not been observed in studies of similar structures."

Specifically, the cups behave like a "split-ring resonator," a type of metamaterial with a negative refractive index—the ability to refract (not reflect) light partially or fully backward. Split-ring resonators look like two concentric, non-touching rings that have each been split in half. When placed in a microwave or infrared field, an alternating current of that same frequency is induced in each ring. Each current in turn induces its own magnetic field at that same microwave or infrared frequency, which can either oppose or enhance the original field.

Split-ring resonators can support resonant wavelengths that are much larger than their size. But since split-ring resonators are flat, their light-scattering abilities are restricted to a plane.

Halas and Mirin's nanocups are much like three dimensional versions of split-ring resonators. When light with the proper frequency is applied, a resonant electron current is induced in the cups. This current produces an electric field that is parallel to the cup opening (not parallel to the cup axis). The scattered light is emitted perpendicular to that field; in other words, in whatever direction the cup's axis is pointing.

This unique light-redirecting property should prove to be very useful in the development of new optical materials and devices, from solar cells to light attenuators to chip-to-chip optical interconnects in futuristic circuitry.

"In this line of research, many other types of nanoparticles and nanostructures can be designed to have this type of light-redirecting property," said Halas.

Halas and Mirin created the nanocups by depositing latex or polystyrene nanoparticles, each about 80 nanometers in diameter, onto a sheet of glass. They coated the particles and the glass with a 20-nanometer-thick layer of gold, applying the gold from different angles to make sure both the sides and tops of each particle were covered, yet leaving an uncoated circular or elliptical "shadow" next to each particle, exposing the surface below.

Finally, they poured an elastic polymer was poured over the array and, when the polymer had cured, peeled it off to reveal a transparent film embedded with gold nanocups.

More information: Nano Lett., Article ASAP • DOI: 10.1021/nl900208z

Copyright 2009 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Explore further: Thinnest feasible nano-membrane produced

add to favorites email to friend print save as pdf

Related Stories

Invention loves collaboration at Milan show

Apr 14, 2014

Collaboration drove invention during Milan's annual International Furniture Show and collateral design week events, yielding the promise of homes without mobile phone chargers, and with more ergonomic seating, ...

3-D printing set to break out of niche

Jan 12, 2014

Some of the oddest items on display this week at the International CES gadget show were edible, origami-like sculptures made of sugar, their shapes so convoluted as to baffle the eye.

Making silicon devices responsive to infrared light

Jan 06, 2014

Researchers have tried a variety of methods to develop detectors that are responsive to a broad range of infrared light—which could form imaging arrays for security systems, or solar cells that harness ...

Ancient Roman glass inspires modern science

Nov 20, 2013

(Phys.org) —A 1700-year-old Roman glass cup is inspiring University of Adelaide researchers in their search for new ways to exploit nanoparticles and their interactions with light.

Nanopores light up for reading out DNA

Sep 12, 2013

Nanopores are ideally suited for threading DNA molecules through them, enabling the genetic code to be read out. Researchers from TU Delft want to make this technology even more powerful by equipping the ...

Recommended for you

Thinnest feasible nano-membrane produced

Apr 17, 2014

A new nano-membrane made out of the 'super material' graphene is extremely light and breathable. Not only can this open the door to a new generation of functional waterproof clothing, but also to ultra-rapid filtration. The ...

Wiring up carbon-based electronics

Apr 17, 2014

Carbon-based nanostructures such as nanotubes, graphene sheets, and nanoribbons are unique building blocks showing versatile nanomechanical and nanoelectronic properties. These materials which are ordered ...

Making 'bucky-balls' in spin-out's sights

Apr 16, 2014

(Phys.org) —A new Oxford spin-out firm is targeting the difficult challenge of manufacturing fullerenes, known as 'bucky-balls' because of their spherical shape, a type of carbon nanomaterial which, like ...

User comments : 2

Adjust slider to filter visible comments by rank

Display comments: newest first

Arkaleus
not rated yet Mar 03, 2009
Nice. Nanoscale, solid-state optical switching. Optical computers are go for launch.
Ethelred
not rated yet Mar 10, 2009
It looked like redirection rather than switching. Light was absorbed and redirected not like in a mirror but perpendicular to the plane of the nanocups. It could for instance be used in a solar thermal array without a need for a movable mount.

Ethelred

More news stories

'Exotic' material is like a switch when super thin

(Phys.org) —Ever-shrinking electronic devices could get down to atomic dimensions with the help of transition metal oxides, a class of materials that seems to have it all: superconductivity, magnetoresistance ...

Innovative strategy to facilitate organ repair

A significant breakthrough could revolutionize surgical practice and regenerative medicine. A team led by Ludwik Leibler from the Laboratoire Matière Molle et Chimie (CNRS/ESPCI Paris Tech) and Didier Letourneur ...