Researchers Report New Record for Wireless Base Station Power Amplifiers

Nov 27, 2008
Donald Kimball is the lead author on the study and a principal development engineer at the UCSD Division of Calit2.

(PhysOrg.com) -- When consumers use their cell phones, reception can depend on the strength of the signals coming to and from wireless base stations. Those base stations in turn depend on high-power amplifiers to extend their range – amplifiers that typically consume ten times more power than they generate, for a 10 percent efficiency rate.

Now, three years after breaking the 50 percent efficiency barrier, researchers at the University of California, San Diego report topping an average 58 percent power added efficiency (PAE) – the best rate reported for a single-stage WCDMA base-station power amplifier – with average output power of 42 watts and a gain of 10.2 decibels.

At 58 percent PAE, 50 watts of output power would require only 86 watts of DC power, rather than the 500 watts required by today's high power base stations which operate at 10 percent efficiency.

The recent study also reports the best reported improvement in linearization.

To attain better linearity and the 58 percent PAE on a WCDMA WiMAX base-station power amplifier, the researchers used high-voltage heterojunction bipolar transistors (HVHBTs) based on gallium arsenide (GaAs), rather than silicon-based technology used in most of today’s 3G base stations, or the gallium nitride (GaN) metal semiconductor field effect transistor (MESFET) used to demonstrate the record 50 percent average PAE in 2005.

“GaAs HVHBTs are attractive options since they can provide both high voltage and high efficiency and gain over wide dynamic range signals,” said lead author Donald Kimball, principal development engineer at Calit2. “Having high efficiency over wide dynamic range is critical because in 3G systems, the demand for power varies widely from instant to instant given the wide variety of modern cell phone communications that go well beyond voice calls.”

As with their earlier work, the UC San Diego engineers combined the heterojunction device with a technique known as envelope tracking, which involves variable power signals instead of the constant feed of DC voltage that is common in high-power amplifiers. The technique adjusts voltage dynamically while reducing the heat generated by the transistor and allowing the amplifier to operate closer to saturation.

Two wireless infrastructure manufacturers – Finnish-based Nokia and China-based HuaWei – have already expressed interest in the UC San Diego findings, which were reported in a paper delivered last week at the 2008 IEEE Compound Semiconductor IC Symposium (CSICS) in Monterey, Calif.

The record was achieved during recent tests in the High-Power Amplifier Laboratory of the UCSD Division of Calit2. The transistor devices were fabricated using TriQuint Semiconductor, Inc.’s GaAs HVHBT process, and three TriQuint engineers co-authored the resulting CSICS paper (Craig Steinbeiser, Thomas Landon and Oleh Krutko).

“TriQuint provided Calit2 with fifteen transistors with a custom on-package match for Envelope Tracking Technology,” said Kimball. “They also sent their top engineers to our facility to work with our students on the project.”

Kimball's co-authors at UC San Diego included Jacobs School of Engineering electrical and computer engineering (ECE) professors Peter Asbeck and Larry Larson (who is also the chair of the department); as well as ECE graduate students Myoungbo Kwak, Jinho Jeong, Chin Hsia and Paul Draxler (who is also an engineer at QUALCOMM Inc.).

The IEEE Compound Semiconductor IC Symposium (CSICS) is the preeminent international forum on developments in integrated circuits using compound semiconductors.

Provided by University of California, San Diego

Explore further: Crash-testing rivets

add to favorites email to friend print save as pdf

Related Stories

Cost of fighting warming 'modest,' says UN panel

Apr 13, 2014

The cost of keeping global warming in check is "relatively modest," but only if the world acts quickly to reverse the buildup of heat-trapping gases in the atmosphere, the head of the U.N.'s expert panel ...

Better chemistry through parallel in time algorithms

Mar 17, 2014

Molecular dynamics simulations often take too long to be practical for simulating chemical processes that occur on long timescales. Scientists DOE's Pacific Northwest National Laboratory, the University of ...

Finding more space in spectrum

Jan 30, 2014

Radio and TV channels, mobile communications, GPS, and emergency communications are just a few examples of applications that occupy the airwaves. The radio spectrum is a finite resource, but demand for bandwidth ...

Recommended for you

Crash-testing rivets

2 minutes ago

Rivets have to reliably hold the chassis of an automobile together – even if there is a crash. Previously, it was difficult to predict with great precision how much load they could tolerate. A more advanced ...

Charging electric cars efficiently inductive

12 minutes ago

We already charge our toothbrushes and cellphones using contactless technology. Researchers have developed a particularly efficient and cost-effective method that means electric cars could soon follow suit.

Customized surface inspection

22 minutes ago

The quality control of component surfaces is a complex undertaking. Researchers have engineered a high-precision modular inspection system that can be adapted on a customer-specific basis and integrated into ...

Sensors that improve rail transport safety

27 minutes ago

A new kind of human-machine communication is to make it possible to detect damage to rail vehicles before it's too late and service trains only when they need it – all thanks to a cloud-supported, wireless ...

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

Going
1 / 5 (1) Nov 28, 2008
The waste amplifier heat would have gone to heating the base station and keeping it dry. With more efficient amps the station will run at a cooler temperature, moisture will enter and reduce reliability.
VOR
5 / 5 (1) Nov 28, 2008
congrats, "Going", you win the 'dumbest post of the day' award.
warmer
not rated yet Nov 28, 2008
Going, you could very easily use a small fan at a fraction of the energy wasted to reduce condensation.