Silicon Light Bulbs to Compete with Fluorescent Bulbs

Mar 06, 2008 by Lisa Zyga weblog
Group IV Semiconductor
Logo: Group IV Semiconductor.

Thomas Edison invented the light bulb in 1880, and, since the 1920s, the incandescent light bulb has remained largely unchanged. While that's a testament to Edison's ingenuity, it's also a bulb that uses up to 95% of its power to generate heat rather than light.

In order to improve this efficiency, the fluorescent bulb has recently gained popularity as an alternative that uses about 25% of its power for light and lasts up to 10,000 hours, compared with the incandescent bulb's 1,500-hour lifetime. However, unlike the recyclable incandescent bulb, fluorescent bulbs contain phosphor and mercury - toxic chemicals that could pose disposal problems on a large scale.

But a company from Ottawa, Canada, is hoping to create a light bulb that further increases the efficiency of fluorescent bulbs, while using completely non-toxic materials. Since 2003, Group IV Semiconductor has been working on a unique bulb design, one that uses a tiny computer chip in place of a traditional wire filament or gas.

The new bulbs, officially called solid state light bulbs, use low-cost silicon technology originally developed for fiber optic networks in the early 2000s. The chips were intended to boost the light signal, increasing its speed and allowing it to travel longer distances. Today, silicon is widely used in cell phones, computers, and other electronics.

But as the telecommunications market began to lose its appeal, Group IV's chief executive Stephen Naor looked into other applications. As he explains, in North America alone, 2.2 billion light bulbs are replaced every year, and lighting is a $12-billion global industry.

Several countries, including the UK and Australia, have laws to ban incandescent bulbs by 2011. Other countries, including the US, are considering bans. As it stands, fluorescent bulbs are currently the main replacement bulb.

But solid state light bulbs could offer a non-toxic alternative, better lighting quality and higher efficiency than fluorescent bulbs. While some types of solid state lighting exist, they are currently too expensive for mass production. For example, LEDs use expensive semiconductors such as gallium nitride, rather than silicon, and often give off an undesirable bluish hue.

But the challenge with using silicon is that the material is poor at emitting light. To solve this, Group IV uses electrical current to energize electrons within silicon quantum dots, which give off energy in the form of photons. Naor hopes to have final prototypes of the technology by 2010, with bulbs on store shelves by 2011 that cost about the same as fluorescent bulbs.

The company has attracted several big investors, such as Vinod Khosla, the founding chief executive of Sun Microsystems. Applied Materials Inc., which makes manufacturing equipment, plans to help Group IV ramp up production of the bulbs once the prototypes have been perfected. Then Group IV plans to sell the microchip technology to major electrical companies such as General Electric, which will incorporate the chip in their own bulb production.

More information: www.GroupIVSemi.com

Explore further: Student designs and develops revolutionary new hand-held laminating tool

add to favorites email to friend print save as pdf

Related Stories

Rohinni's Lightpaper invites innovative lighting

Nov 30, 2014

Rohinni's Twitter statement on what this company is all about is quite simple: We print light. Print light? This Coeur d'Alene, Idaho-based company is introducing its Lightpaper, with a promotional video ...

Budget deal takes aim, but misses on climate plans

Dec 11, 2014

A congressional deal to finance the government chips away at some Obama administration energy and environmental programs, but leaves largely intact the president's plans on global warming—at least until Republicans take ...

Recommended for you

Fully automated: Thousands of blood samples every hour

6 hours ago

Siemens is supplying automation technology for the longest and one of the most cutting-edge sample processing lines in any clinical laboratory. The line, or automation track, 200 meters long, in Marlborough, ...

Explainer: What is 4-D printing?

7 hours ago

Additive manufacturing – or 3D printing – is 30 years old this year. Today, it's found not just in industry but in households, as the price of 3D printers has fallen below US$1,000. Knowing you can p ...

First series production vehicle with software control

7 hours ago

Siemens has unveiled the first electric series production vehicle with the central electronics and software architecture RACE. This technology, developed in the research project of the same name, replaces ...

Amputee puts limb system through its paces

9 hours ago

"Amputee Makes History with APL's Modular Prosthetic Limb" is the headline from Johns Hopkins Applied Physics Laboratory, where a team working on prosthetics observed a milestone when a double amputee showed ...

User comments : 9

Adjust slider to filter visible comments by rank

Display comments: newest first

Soylent
5 / 5 (1) Mar 06, 2008
Neat.
Raen
4.8 / 5 (4) Mar 06, 2008
"...laws to ban iridescent bulbs by 2011."

I think you mean 'incandescent': emitting light due to high temperature. An iridescent light bulb would be all rainbowy, and too pretty to be banned.
21stCenturyguy
1 / 5 (1) Mar 07, 2008
Cut and pasted from article

"Several countries, including the UK and Australia, have laws to ban incandescent bulbs by 2011"

Stay off the Drugs man.........
nilbud
not rated yet Mar 07, 2008
2.2Billion p/a in nort america, that's 7 bulbs for every man woman and child which seems excessive.
DGBEACH
not rated yet Mar 07, 2008
Definately good news.
gopher65
5 / 5 (2) Mar 07, 2008
That was my initial reaction too nilbud, but I've changed my mind. I just looked around my apartment:

1 - Fridge
1 - Oven
1 - Fan above oven
1 - Microwave
1 - Kitchen
1 - Pantry
1 - Living room
3 - Bedroom ceiling (seems excessive)
1 - Bedroom lamp
4 - Other lamps
4 - Bathroom

... and then maybe 300 LEDs on various pieces of electronics. So not including LEDs I have 19 lightbulbs in my little apartment alone. Then there are bulbs that no single person owns, like airport lights, street lights, etc. And then additional things like car lights, night lights, flashlights, etc. My apartment building probably has... 150... maybe 200 light bulbs always on in the hallways, elevators, and stairs.

So when you think about it there are a lot of bulbs out there.
COCO
not rated yet Mar 13, 2008
good to see that Canada is going to make money from this as the light bulb was a Canadian invention - Edison bought the patent.
googleplex
1 / 5 (1) Mar 13, 2008
If you read the following what comes to mind:

"leave the room immediately",
"turn off the air vents"
"dont vacuum it up"

No, this is not a nuclear reactor leak. This is federal advice for the Compact Fluorescent Light (CFL) bulb clean up. (Source: http://www.epa.go...dex.htm)

Sadly it is invisible so the average Joe would not give it a second thought. Does it talk about clean up on the box...NO!
Is this what you want in your kids bedroom?

CFL toxicity is a huge problem. I contend that the CFLs merely shift the burden of pollution from power plants to peoples homes and work places.
So how do you dispose of CFLs. Put them in the trash? No. Take them to the dump for special handling? No - too toxic for them. Take them to the store or manufacturer? No.
The only place I have heard of that takes them in my area is Ikea.

Let's hope they quickly develop a safe alternative.
stringer
not rated yet Mar 23, 2008
fluorescent bulb has recently gained popularity as an alternative that uses about 25% of its power for light and lasts up to 10,000 hours, compared with the incandescent bulb's 1,500-hour lifetime.
My comment
I have at least 10 compact fluorescent lamps which have failed after much less than 1000 hours
I have yet to find one lasting for 10,000 hours. I find that the fluorescent tubes last much lnger than the compact lamps

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.