Researchers build two versions of new most accurate clock ever

May 30, 2013 by Bob Yirka report
(A) Laser light at 578 nm is pre-stabilized to an isolated, high-finesse optical cavity using Pound-Drever-Hall detection and employing electronic feedback to an acousto-optic modulator (AOM) and laser piezoelectric-transducer. This stable laser light is then delivered to the Yb-1 and Yb-2 systems, where it is aligned along the optical lattice axis to probe the atomic clock transition. Resonance with the atomic transition is detected by observing atomic fluorescence collected onto a photomultiplier tube (PMT). The fluorescence signal is digitized and processed by a microcontroller unit (MCU), which computes a correction frequency, f1;2(t). This correction frequency is applied to the relevant AOM by way of a direct digital synthesizer (DDS), and locks the laser frequency onto resonance with the clock transition. (B) Relevant Yb atomic energy levels and transitions, including laser cooling transitions (399 and 556 nm), the clock transition (578 nm), and the optical pumping transition used for excited state detection (1388 nm). (C) A single-scan, normalized excitation spectrum of the 1S0- 3P0 clock transition in 171Yb with 140 ms Rabi spectroscopy time; the red line is a free-parameter sinc2 function fit. Credit: arXiv:1305.5869 [physics.atom-ph]

( —Researchers at the National Institute of Standards and Technology in Boulder Colorado have succeeded in building a record breaking clock—one that has an instability of just one part in 10-18. They describe their new clock in a paper they've uploaded to the preprint server arXiv. In it they suggest that if their clock could somehow be used to gauge the age of the universe, it would be able to do so within just a single second.

As time has passed, clock-making has become more important—besides helping people get together at prearranged times, clocks now help run the GPS system, keep networks on track and are key to unlocking the of the universe. As technology has grown in sophistication, so too has the need for ever more . This has led to atomic clocks which use the frequency in the ultraviolet, optical or microwave region of the to keep very accurate time. In this new effort, the researchers built a new type of atomic clock that is more accurate than any that has come before.

To build their clock the researchers employed a laser and mirrors to build a lattice trap capable of capturing atoms—its purpose was to hold atoms steady so that there wouldn't be any frequency interference, a problem with other . The trap was then filled with ytterbium atoms which were then shot with a second laser to measure their electronic frequencies. The result was a clock that if allowed, would be off by less than a second if run for 31 billion years.

Building a clock that is believed to be the most accurate in the world creates a problem though, how to accurately measure its accuracy? The answer is by building another clock exactly like the first of course and then comparing the two against one another. That's what the researchers did, running both clocks for a short period to see if they came up with exactly the same time duration, which the researchers report, they did.

One of the first uses for the new clock will be in measuring gravitational redshift, which is a means of measuring very precisely, the height of geographic areas. This can be done because time moves slower in areas of higher gravity. The researchers say their new clock is capable of measuring redshit to within 1 centimeter.

Explore further: New insights found in black hole collisions

More information: An atomic clock with $10^{-18}$ instability, arXiv:1305.5869 [physics.atom-ph]

Atomic clocks have been transformational in science and technology, leading to innovations such as global positioning, advanced communications, and tests of fundamental constant variation. Next-generation optical atomic clocks can extend the capability of these timekeepers, where researchers have long aspired toward measurement precision at 1 part in $bm{10^{18}}$. This milestone will enable a second revolution of new timing applications such as relativistic geodesy, enhanced Earth- and space-based navigation and telescopy, and new tests on physics beyond the Standard Model. Here, we describe the development and operation of two optical lattice clocks, both utilizing spin-polarized, ultracold atomic ytterbium. A measurement comparing these systems demonstrates an unprecedented atomic clock instability of $bm{1.6times 10^{-18}}$ after only $bm{7}$ hours of averaging.

via Arxiv Blog

Related Stories

Physicists propose a way to make atomic clocks more accurate

Nov 07, 2012

(—Physicists Andrei Derevianko of the University of Nevada and Victor Flambaum and Vladimir Dzuba of the University of New South Wales have proposed in a paper published in Physical Review Letters a way to imp ...

Optical strontium clock to become much more accurate

Jan 09, 2013

(—An optical clock with neutral strontium atoms is considered one of the top candidates for the definition of a "new" second. The probabilities have increased considerably, since its frequency ...

The tick-tock of the optical clock

Mar 29, 2012

( -- UK's National Physical Laboratory time scientists have made an accurate measurement of the highly forbidden octupole transition frequency in an ytterbium ion, which could be used as the basis ...

Recommended for you

Turning back time by controlling magnetic interactions

10 minutes ago

In many materials, macroscopic magnetic properties emerge when microscopically small magnets align in a fixed pattern throughout the whole solid. In a publication in Nature Communications, Johan Mentink, Karste ...

New insights found in black hole collisions

Mar 27, 2015

New research provides revelations about the most energetic event in the universe—the merging of two spinning, orbiting black holes into a much larger black hole.

X-rays probe LHC for cause of short circuit

Mar 27, 2015

The LHC has now transitioned from powering tests to the machine checkout phase. This phase involves the full-scale tests of all systems in preparation for beam. Early last Saturday morning, during the ramp-down, ...

User comments : 4

Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (4) May 30, 2013
The researchers say their new clock is capable of measuring redshit to within 1 centimeter.

Now they need to invent the world's best spelling checker!
1 / 5 (4) May 30, 2013
One of the first uses for the new clock will be in measuring gravitational redshift, which is a means of measuring very precisely, the height of geographic areas. This can be done because time moves slower in areas of higher gravity. The researchers say their new clock is capable of measuring redshit to within 1 centimeter.

By the way, it is to note that according to Einstein general theory of relativity, time moves slower in areas of higher gravity, anyway the problem is that the theory does not explain how and why it is so! Maybe understanding the time dilation mechanism could solve the problem as follow….
5 / 5 (1) May 31, 2013
Yikes! Also yikes on the crackpot, denying that general relativity tells us exactly how and spacetime behaves as it does which of course is the use of the theory.
1 / 5 (1) Jun 02, 2013
Great work ! That metrology is fundamental to the physical sciences is something that has been realised ever since Galileo - even if certain "philosophers" still fail to understand the fact....


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.