Gold nanocrystal vibration captured on billion-frames-per-second film (w/ video)

May 23, 2013
The acoustic phonons can be visualized on the surface as regions of contraction (blue) and expansion (red). Also shown are two-dimensional images comparing the experimental results with theory and molecular dynamics simulation. The scale bar is 100 nanometers. Credit: Jesse Clark/UCL

A billon-frames-per-second film has captured the vibrations of gold nanocrystals in stunning detail for the first time.

The film, which was made using 3D imaging pioneered at the London Centre for Nanotechnology (LCN) at UCL, reveals important information about the composition of gold. The findings are published in the journal Science.

Jesse Clark, from the LCN and lead author of the paper said: "Just as the sound quality of a musical instrument can provide great detail about its construction, so too can the vibrations seen in materials provide important information about their composition and functions."

"It is absolutely amazing that we are able to capture snapshots of these nanoscale motions and create movies of these processes. This information is crucial to understanding the response of materials after . "

Scientists found that the vibrations were unusual because they start off at exactly the same moment everywhere inside the crystal. It was previously expected that the effects of the excitation would travel across the gold nanocrystal at the speed of sound, but they were found to be much faster, i.e., supersonic.

The new images support for with metals, where energy is first transferred to electrons, which are able to short-circuit the much slower motion of the atoms.

This video is not supported by your browser at this time.
The acoustic phonons can be visualized on the surface as regions of contraction (blue) and expansion (red). The diameter of the nanocrystal is 350 nanometers. Credit: UCL/Jesse Clark

The team carried out the experiments at the SLAC National Accelerator Laboratory using a revolutionary X-ray laser called the "". The pulses of X-rays are extremely short (measured in , or quadrillionths of a second), meaning they are able to freeze all motion of the atoms in any sample, leaving only the electrons still moving.

However, the X-ray pulses are intense enough that the team was able to take single snapshots of the vibrations of the gold they were examining. The was started with a short pulse of .

The vibrations were imaged a short time later in 3D using the coherent diffraction imaging methods pioneered in LCN by the Robinson group. The 3D movies reveal in exquisite detail the distortions taking place within the nanocrystal, with the fastest vibrations repeating every 90 picoseconds.

This video is not supported by your browser at this time.
The acoustic phonons can be visualized on the surface as regions of contraction (blue) and expansion (red). The diameter of the nanocrystal is 350 nanometers. Credit: Jesse Clark/UCL

Professor Robinson, also from the LCN and the group leader, said: "This work represents an impressive example of teamwork by about a hundred people at SLAC. The SLAC linear accelerator was built in 1957 in direct response to the news of Sputnik.

"After compelling 50 years of sensational high energy physics, that machine has been refitted as a laser by the addition of a 100m long array of magnets. This 3km-sized machine produces a beam which is focused onto a crystal smaller than a micron in a pulse so short that all motion of its atoms is frozen still."

Explore further: Toward making lithium-sulfur batteries a commercial reality for a bigger energy punch

More information: 'Ultrafast three dimensional imaging of lattice dynamics in gold nanocrystals' is published online today in the journal Science.

Related Stories

X-ray laser pulses in two colors

Mar 27, 2013

(Phys.org) —SLAC researchers have demonstrated for the first time how to produce pairs of X-ray laser pulses in slightly different wavelengths, or colors, with finely adjustable intervals between them – ...

New X-ray tool proves timing is everything

Feb 20, 2013

(Phys.org)—With SLAC's Linac Coherent Light Source X-ray laser, timing is everything. Its pulses are designed to explore atomic-scale processes that are measured in femtoseconds, or quadrillionths of a ...

Recommended for you

A nanosized hydrogen generator

4 hours ago

(Phys.org) —Researchers at the US Department of Energy's (DOE) Argonne National Laboratory have created a small scale "hydrogen generator" that uses light and a two-dimensional graphene platform to boost ...

For electronics beyond silicon, a new contender emerges

Sep 16, 2014

Silicon has few serious competitors as the material of choice in the electronics industry. Yet transistors, the switchable valves that control the flow of electrons in a circuit, cannot simply keep shrinking ...

Making quantum dots glow brighter

Sep 16, 2014

Researchers from the University of Alabama in Huntsville and the University of Oklahoma have found a new way to control the properties of quantum dots, those tiny chunks of semiconductor material that glow ...

The future face of molecular electronics

Sep 16, 2014

The emerging field of molecular electronics could take our definition of portable to the next level, enabling the construction of tiny circuits from molecular components. In these highly efficient devices, ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

Tachyon8491
3 / 5 (2) May 24, 2013
I know we can take femtosecond pictures with Kerr cells, but how do we take, and record, a billion frames per second - does anyone know the technology - I would be most interested to get greater insight into that.