Researchers demonstrate highly unidirectional 'whispering gallery' microlasers

Dec 13, 2010
The new microlaser uses an elliptical resonator with a wavelength-sized notch (seen at top right) on the boundary to create unidirectional rays (bottom left). Credit: Courtesy of the laboratory of Federico Capasso, Harvard School of Engineering and Applied Sciences (SEAS)

Utilizing a century-old phenomenon discovered in St. Paul's Cathedral, London, applied scientists at Harvard University have demonstrated, for the first time, highly collimated unidirectional microlasers.

The result of a collaboration with researchers from Hamamatsu Photonics in Hamamatsu City, Japan, and the Institute of Theoretical Physics of the University of Magdeburg, Germany, the advance has a wide range of new applications in photonics such as sensing and communications.

Published online this week in the , the research team took advantage of a concept in physics referred to as "whispering gallery modes."

Over a century ago, British scientist Lord Rayleigh wondered how two people standing on opposite sides of the dome in St. Paul's Cathedral could hear each other by whispering into the circular wall. He discovered that the sound skirts along the smooth surface of the wall with negligible attenuation due to scattering or absorption.

Upper panel: This is a scanning electron microscope image of the notched elliptical resonator with a minor radius X = 80 μm, a major radius Y = 96 μm and notch dimensions o = 3 μm, and d = 2 μm. Lower panel: Zoom-in view of the device showing the smooth sidewall of the laser cavity. The two white dashed lines indicate the boundaries of the active region. Credit: Courtesy of the laboratory of Federico Cappaso, Harvard School of Engineering and Applied Sciences (SEAS)

The optical analog of whispers in a dome are light rays confined to the perimeter of tiny circular disks by multiple reflections from the boundary as they circle around. Because attenuation is minimal within the smooth disk, these resonators have already been used to make some of the world's lowest-threshold lasers. Circular disks, however, have posed certain challenges.

"One of the crucial unsolved problems of these microlasers for practical applications has been that their emission is non-directional and their optical power output is negligible," said team leader Federico Capasso, Robert L. Wallace Professor of and Vinton Hayes Senior Research Fellow in Electrical Engineering at Harvard's School of Engineering and Applied Sciences (SEAS).

"Light gets trapped by these whispering gallery modes with little chance to escape except by a faint isotropic emission. Strategies to suitably deform the disks to solve this problem have yielded disappointing results," Capasso added.

By shaping the microlaser as an ellipse with a wavelength-size notch carved out from its edge, Capasso's team found that the cycling whispering gallery modes scatter efficiently off the notch and emerge as nearly parallel beams from the microlaser.

Upper panel: Schematic illustration of the notched elliptical resonator. Lower panel: Ray simulation of whispering gallery mode dynamics. Credit: Courtesy of the laboratory of Federico Capasso, Harvard School of Engineering and Applied Sciences (SEAS).

The prototypes are quantum cascade lasers emitting an optical power of 5 milliwatts at a wavelength of 10 microns. The microlaser performance is insensitive to the details of the notch, making this device design very robust.

"Our calculations show that the notched elliptical microlaser should have even better performance at the shorter wavelengths near 1 micron, typical of laser diodes used in optical communications, where the attenuation of whispering gallery modes is negligible," said coauthor Jan Wiersig of the Institute of Theoretical Physics of the University of Magdeburg.

"The successful realization of these simple-structured and robust microlasers through standard wafer-based fabrication makes small-volume directional light sources possible for many important applications such as photonic integrated circuits with high-density chip-scale integration, optical communications, medical/biological sensors, and lab-on-a-chip," said coauthor Masamichi Yamanishi, Research Fellow of Central Research Laboratories at Hamamatsu.

Explore further: High-tech method allows rapid imaging of functions in living brain

Related Stories

Tiny lasers get a notch up

Jan 22, 2009

Tiny disk-shaped lasers as small as a speck of dust could one day beam information through optical computers. Unfortunately, a perfect disk will spray light out, not as a beam, but in all directions. New theoretical results, ...

Building a more versatile laser

Nov 16, 2009

( -- One of the drawbacks associated with using semiconductor lasers is that many of them can only produce a beam of a single wavelength, and can only send that beam in one direction at a time. ...

Recommended for you

Trapping and watching motile cells

2 hours ago

A new approach enables rapid characterization of living suspension cells in 4 dimensions while they are immobilized and manipulated within optical traps.

Understanding spectral properties of broadband biphotons

Mar 26, 2015

Advances in quantum optical technologies require scientists to control and exploit the properties of so-called biphotons. Biphotons occur when two photons become 'quantum-entangled' - spatially separate entities ...

User comments : 6

Adjust slider to filter visible comments by rank

Display comments: newest first

2 / 5 (3) Dec 13, 2010
Oh god, once the bacteria get hold of these we're all going to die.
5 / 5 (1) Dec 14, 2010
I never cease to be amazed at how many articles on integrated laser technology (including in peer-reviewed journals) fail to mention even what the semiconductor was, let alone how the layers were grown!
not rated yet Dec 18, 2010
I never cease to be amazed at how many articles on integrated laser technology (including in peer-reviewed journals) fail to mention even what the semiconductor was, let alone how the layers were grown!

Shows it right there. Au... aluminum
not rated yet Dec 20, 2010
Thanks for the comment, Vinnie, but there are such things as adhesion and barrier layers, which introduce some ambiguity if you want to infer the semiconductor from the metal.
not rated yet Dec 31, 2010
Au is gold.
not rated yet Jan 03, 2011
Yes, Daan, I know that. What we don't know is whether the gold is directly in contact with the semiconductor, or whether there are adhesion and diffusion barrier layers that might have been left out of the article but not from the laser.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.