NASA Scientists Pioneer Method for Making Giant Lunar Telescopes

June 4, 2008
NASA Scientists Pioneer Method for Making Lunar Telescopes
After Apollo 12 left lunar orbit this image of the Moon was taken from the command module on 11/24/69. Credit: NASA

Scientists working at NASA’s Goddard Space Flight Center in Greenbelt, Md., have concocted an innovative recipe for giant telescope mirrors on the Moon. To make a mirror that dwarfs anything on Earth, just take a little bit of carbon, throw in some epoxy, and add lots of lunar dust.

"We could make huge telescopes on the moon relatively easily, and avoid the large expense of transporting a large mirror from Earth," says Peter Chen of NASA Goddard and the Catholic University of America, which is located in Washington, D.C. "Since most of the materials are already there in the form of dust, you don’t have to bring very much stuff with you, and that saves a ton of money."

Chen and his Goddard colleagues Douglas Rabin, Michael Van Steenberg, and Ron Oliversen are presenting their mirror-making technique in a poster at the 212th meeting of the American Astronomical Society in St. Louis, Mo. They will also describe their results in a press conference on Wednesday, June 4.

For years, Chen had been working with carbon-fiber composite materials to produce high-quality telescope mirrors. But Chen and his colleagues decided to try an experiment. They substituted carbon nanotubes (tiny tubular structures made of pure carbon) for the carbon-fiber composites. When they mixed small amounts of carbon nanotubes and epoxies (glue-like materials) with crushed rock that has the same composition and grain size as lunar dust, they discovered to their surprise that they had created a very strong material with the consistency of concrete. This material can be used instead of glass to make mirrors.

They next applied additional layers of epoxy and spun the material at room temperature. The result was a 12-inch-wide mirror blank with the parabolic shape of a telescope mirror. All of this was achieved with minimal effort and cost.

"After that, all we needed to do was coat the mirror blank with a small amount of aluminum, and voilà, we had a highly reflective telescope mirror," says Rabin. "Our method could be scaled-up on the moon, using the ubiquitous lunar dust, to create giant telescope mirrors up to 50 meters in diameter." Such an observatory would dwarf the largest optical telescope in the world right now: the 10.4-meter Gran Telescopio Canarias in the Canary Islands.

The capabilities of a 50-meter telescope on the Moon boggle the imagination, according to NASA. With a stable platform, and no atmosphere to absorb or blur starlight, the monster scope could record the spectra of extra solar terrestrial planets and detect atmospheric biomarkers such as ozone and methane. Two or more such telescopes spanning the surface of the Moon can work together to take direct images of Earth-like planets around nearby stars and look for brightness variations that come from oceans and continents. Among many other projects, it could make detailed observations of galaxies at various distances, to see how the universe evolved.

"Constructing giant telescopes provides a strong rationale for doing astronomy from the moon," says Chen. "We could also use this on-site composite material to build habitats for the astronauts, and mirrors to collect sunlight for solar-power farms."

Chen notes that his group achieved this breakthrough with only the support of small NASA internal seed funds. The carbon nanotubes were contributed by Dan Powell, Lead Nanotechnologist for NASA Goddard. Several amateur astronomers made key contributions by advising and making special epoxy formulations, helping with polishing experiments, and vacuum coating the 12-inch mirror.

Source: NASA, by Robert Naeye

Explore further: Upgraded Hobby-Eberly Telescope sees first light

Related Stories

Upgraded Hobby-Eberly Telescope sees first light

November 4, 2015

After several years and a massive team effort, one of the world's largest telescopes has opened its giant eye again. The Hobby-Eberly Telescope (HET) at The University of Texas at Austin's McDonald Observatory has completed ...

Uranus' "Frankenstein moon" Miranda

November 2, 2015

Ever since the Voyager space probes ventured into the outer Solar System, scientists and astronomers have come to understand a great deal of this region of space. In addition to the four massive gas giants that call the outer ...

The moon

September 21, 2015

Look up in the night sky. On a clear night, if you're lucky, you'll catch a glimpse of the moon shining in all it's glory. As Earth's only satellite, the moon has orbited our planet for over three and a half billion years. ...

A Telescope Made of Moondust

July 10, 2008

A gigantic telescope on the Moon has been a dream of astronomers since the dawn of the space age. A lunar telescope the same size as Hubble (2.4 meters across) would be a major astronomical research tool. One as big as the ...

Recommended for you

Hubble captures a galactic waltz

November 26, 2015

This curious galaxy—only known by the seemingly random jumble of letters and numbers 2MASX J16270254+4328340—has been captured by the NASA/ESA Hubble Space Telescope dancing the crazed dance of a galactic merger. The ...

Earth might have hairy dark matter

November 23, 2015

The solar system might be a lot hairier than we thought. A new study publishing this week in the Astrophysical Journal by Gary Prézeau of NASA's Jet Propulsion Laboratory, Pasadena, California, proposes the existence of ...

Scientists detect stellar streams around Magellanic Clouds

November 23, 2015

(—Astronomers from the University of Cambridge, U.K., have detected a number of narrow streams and diffuse debris clouds around two nearby irregular dwarf galaxies called the Magellanic Clouds. The research also ...


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (2) Jun 04, 2008
Its a cool Idea, with the added benefit of construction use, but how to transport all that heavy resin? Could not we find a way to make normal concrete on the moon for shelters, and use the good stuff for the mirrors?
5 / 5 (3) Jun 04, 2008
This seems like it could be a really worthy project. I don't know why else you'd want to go to the moon at the moment, but this would great. I even imagine you could get a good amount of public support behind this.

Should we start writing senators? =D
4 / 5 (1) Jun 04, 2008
Theoretically this makes more sense than a space station or space telescope. A moonbase constrcuted mostly from native materials could allow astronauts to function in low gravity environment, far healthier than zero g. Most of the systems for the telescopes could be fully automated, but have maintenance once in a while.
4 / 5 (1) Jun 05, 2008
From wikipedia: "In terms of elements, the lunar crust is composed primarily of oxygen, silicon, magnesium, iron, calcium, and aluminium, but important minor and trace elements such as titanium, uranium, thorium, potassium, and hydrogen are present as well."

I would think the hydrogen and oxygen could be used to produce water, which would allow us to ship powdered resin there. Seems like there's a lot we could do with that many elements.
4 / 5 (1) Jun 05, 2008
oh please oh please oh please do this!!!
3 / 5 (1) Jun 05, 2008
Cool down everybody!

Parabolic concrete is not a telescope mirror.

Concrete and epoxies are awful (=impossible) materials to make mirrors.

0.2m and 50m mirrors share nothing.

Epoxy contains no water, hence "powdered" is pointless.

Normal concrete needs water which needs hydrogen, quite scarce there.

The report fabulously exaggerates the usability of the discover, and you all swallow the bait.
not rated yet Jun 05, 2008
Sounds like a pretty good plan, particularly the plan for two mirrors. I just hope there is some good protection from incoming meteors.
4 / 5 (1) Jun 05, 2008
Well its a better idea than building the mirror out of wood! a concrete mirror base could be spun toa parabola, then ground smooth by a robot. The bowl could be filled with molten aluminum and spun. Then lapped by the same robot.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.