A look into the nanoscale

June 23, 2008
A look into the nanoscale
A visible light laser beam (i) is focused onto the sample (iii) and acts as the excitation pulse. A soft X-ray pulse (ii) is focused to the same location but at a continuously variable delay. The X-ray pulse diffracts from the sample, carrying information about the transient sample structure to the CCD detector (v) in the form of a coherent diffraction pattern. A mirror (iv) separates the direct beam from the diffracted light: the direct FEL beam (vi) passes straight through a hole in the mirror and is not detected in the CCD image.

Lawrence Livermore National Laboratory researchers have captured time-series snapshots of a solid as it evolves on the ultra-fast timescale.

Using femtosecond X-ray free electron laser (FEL) pulses, the team, led by Anton Barty, is able to observe condensed phase dynamics such as crack formation, phase separation, rapid fluctuations in the liquid state or in biologically relevant environments.

Other Livermore scientists include Michael Bogan, Stafan Hau-Riege, Stefano Marchesini, Matthias Frank, Bruce Woods, former Livermore researcher Saša Bajt and former LLNL scientist Henry Chapman, who is now at the Centre for Free Electron Laser Science, DESY, in Hamburg, Germany.

Sample evolution revealed by coherent X-ray diffraction. Measured single-shot diffraction patterns at 25 ps (a ), corresponding to the object just before the laser excitation pulse, and diffraction patterns from the same object at 10 ps (b), 15 ps (c), 20 ps (d) 40 ps (e) and 140 ps ( f ) after the laser pulse.

“The ability to take images in a single shot is the key to studying non-repetitive behavior mechanisms in a sample,” Barty said.

As the femtosecond laser blasts the sample, it is destroyed, but not before the scientists created images with a 50-nanometer spatial resolution, and a 10-femtosecond shutter speed. (A femtosecond is one billionth of one millionth of a second. For context, a femtosecond is to a second as a second is to about 32 million years.)

“This experiment opens the door to a new regime of time-resolved experiments in mesoscopic dynamics,” Barty said. “This technique could be extended to a few nanometers spatial and a few tens of femtoseconds temporal resolution.”

This is the first time that optical pulses have been used to image samples at the nanometer-spatial resolution scale. Earlier studies were limited to a few micrometers.

The “shutter speed” of the measurements is determined by the femtosecond duration of the FEL X-ray pulse. This allowed the team to obtain nanometer spatial resolution of violent and destructive events in which the sample is completely destroyed.

The new technique is necessary to study ultrafast dynamics of non crystalline materials at nanometer-length scales.

This includes fracture dynamics, shock formation, spallation, ablation and plasma formation under extreme conditions.

The technique also allows researchers to image dynamic process in the solid state such as nucleation and phase growth, phase fluctuations and various forms of electronic or magnetic segregation.

The research appears in the June 22 online edition of Nature Photonics.

Source: Lawrence Livermore National Laboratory

Explore further: Scientists capture crystallization of materials in nanoseconds

Related Stories

X-ray blaze on an invisible world

April 6, 2005

With laser-precise x-ray vision, the Linac Coherent Light Source will be an unprecedented tool to see how ultra-fast, ultra-small things work The way that a horse trots intrigued Leland Stanford. After a term as California's ...

Graphite enters different states of matter

May 16, 2012

(Phys.org) -- For the first time, scientists have seen an X-ray-irradiated mineral go to two different states of matter in about 40 femtoseconds (a femtosecond is one quadrillionth of a second).

Designing exascale computers

July 23, 2014

"Imagine a heart surgeon operating to repair a blocked coronary artery. Someday soon, the surgeon might run a detailed computer simulation of blood flowing through the patient's arteries, showing how millions of red blood ...

Sensing the Energy: Calibrating the LCLS

October 1, 2008

The Linac Coherent Light Source will generate X-rays 10 billion times brighter than any source before it. Being the first of its kind, the LCLS has presented engineers with a number of unique technical hurdles. Measuring ...

Recommended for you

Physicists develop new technique to fathom 'smart' materials

November 26, 2015

Physicists from the FOM Foundation and Leiden University have found a way to better understand the properties of manmade 'smart' materials. Their method reveals how stacked layers in such a material work together to bring ...

Mathematicians identify limits to heat flow at the nanoscale

November 24, 2015

How much heat can two bodies exchange without touching? For over a century, scientists have been able to answer this question for virtually any pair of objects in the macroscopic world, from the rate at which a campfire can ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Jun 23, 2008
Caltech has a whole streaming lecture on this kind of thing if anyone is interested. I found it quite fascinating although much of it was way over my head.
http:// today.caltech.edu/theater/list?subset=science
(take out the spaces)
see Ding-shyue Yang: Seeing Is Believing: Visualization of Condensed-Matter Structures 5/1/2008

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.