Tiny lab on a chip analyzes very small volumes of liquid

Tiny lab on a chip
Fig.1 Schematic diagram and photograph of the newly developed terahertz (THz) biochemical chip. The chip is made of GaAs, a nonlinear optical crystal, and is composed of five metamaterial units and a single microchannel on the surface. By irradiating with a femtosecond laser from the back surface of the crystal, a point THz light source is generated to interact with the solution. Credit: Kazunori Serita

Scientists from the Institute of Laser Engineering at Osaka University created a prototype terahertz optical spectroscopy system with a sensing area equivalent to the cross-sectional area of just five human hairs. By measuring the shift in peak transmittance wavelength of a terahertz radiation source, the concentration of even trace dissolved contaminants in a tiny drop of water can be measured. This work may lead to portable sensors for applications such as the early detection of diseases, drug development, and water pollution monitoring.

Lab-on-a- is an exciting area of research. The ability to test patient samples at the bedside, or monitor out in the field, with a portable monitoring device is very attractive. However, achieving strong sensitivity to the concentration of target analytes of interest can be difficult, especially when samples consist of very tiny volumes of liquid.

Now, a team of researchers at Osaka University has used a proprietary terahertz radiation source in a containing a metamaterial structure to quantify the amount of trace contamination in water. "Using this lab-on-a chip system, we could detect minute changes in the concentration of trace amounts of ethanol, glucose, or minerals in water by measuring the shift in the resonance frequencies," first author Kazunori Serita says.

Tiny lab on a chip
Fig.2 Plots of the resonance frequency shift as a function of the mineral concentration in 85 picoliters of water. By observing the magnitude of the shift away from the resonance frequency of pure water, the solute can be detected with a sensitivity of 472 attomoles. Credit: Kazunori Serita

The I-design consists of a metallic strip with a micrometer-sized gap sandwiched by other metallic strips. It is periodically arrayed in a row of five units, which formed a kind of "meta-atom," in which peak optical transmittance varied based on the presence of trace contamination by dissolved molecules. This device is an application of the point terahertz source technology previously developed at Osaka University. A tiny source of terahertz light was generated by the irradiation spot of a femtosecond-pulse laser beam that induces a tightly confined electric-field mode at the gap regions. It then modifies the when a microchannel fabricated in the space between the metallic strips is filled with the sample solution.

"We succeeded in detecting just 472 attomoles of solutes in solutions with volumes of less than 100 picoliters, which is an order of magnitude better than existing microfluidic chips," senior author Masayoshi Tonouchi says. This work can lead to significant improvements in portable sensing, both in terms of sensitivity and the amount of liquid required.

The study is published in the Journal of Physics: Photonics.

More information: Kazunori Serita et al, I-design terahertz microfluidic chip for attomole-level sensing, Journal of Physics: Photonics (2022). DOI: 10.1088/2515-7647/ac691d

Provided by Osaka University

Citation: Tiny lab on a chip analyzes very small volumes of liquid (2022, June 27) retrieved 25 April 2024 from https://phys.org/news/2022-06-tiny-lab-chip-small-volumes.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Microanalysis of biological samples for early disease detection

124 shares

Feedback to editors