Scientists develop inexpensive method to produce E-sail tethers

Scientists develop inexpensive method to produce E-sail tethers
Dr. Petri Toivanen (Finnish Meteorological Institute) and the tether factory. Image: Petri Toivanen.

Thin metallic tethers for Coulomb drag devices that tow satellites and spacecraft can now be produced more easily than before. Scientists of the Finnish Meteorological Institute have developed a method to produce multi-wire tether by twisting hair-thin metal wires.

The (E-sail) enables transportation in the solar system without propellant. Likewise, the plasma brake eliminates the orbital debris problem by providing low-cost reentry at the end of a satellite mission. Both exploit the plasma Coulomb drag effect. The technology requires multi-wire tethers made of hair-thin wires.

Scientists at the Finnish Meteorological Institute have now developed a new method to produce Coulomb drag tethers. Earlier, the Electronics Research Laboratory of the University of Helsinki produced tethers using ultrasonic bonding. The new method is simpler and is based on twisting metal wires. The method resembles the industrial production of hexagonal chicken wire mesh. It produces a four- tether from 0.05-mm-thin metal wires. The tether must be made of multiple wires so that it is not broken, even if micrometeoroids cut the individual wires every now and then.

"Four subwires give sufficient micrometeoroid tolerance even for full-scale E-sail and plasma brake," says Dr. Petri Toivanen of the Finnish Meteorological Institute.

The tether and the plasma brake are to be tested on the FS-1 nanosatellite of the Finnish Centre of Excellence in Research of Sustainable Space.


Explore further

Snap-proof space tether

Provided by Finnish Meteorological Institute
Citation: Scientists develop inexpensive method to produce E-sail tethers (2020, March 25) retrieved 31 March 2020 from https://phys.org/news/2020-03-scientists-inexpensive-method-e-sail-tethers.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
13 shares

Feedback to editors

User comments