3-D printed tires and shoes that self-repair

February 5, 2019, University of Southern California
Severed 3D-printed shoe pad repairing itself. Credit: An Xin and Kunhao Yu

Instead of throwing away your broken boots or cracked toys, why not let them fix themselves? Researchers at the University of Southern California Viterbi School of Engineering have developed 3-D-printed rubber materials that can do just that.

Assistant Professor Qiming Wang works in the world of 3-D printed materials, creating new functions for a variety of purposes, from flexible electronics to sound control. Now, working with Viterbi students Kunhao Yu, An Xin, and Haixu Du, and University of Connecticut Assistant Professor Ying Li, they have made a new material that can be manufactured quickly and is able to repair itself if it becomes fractured or punctured. This material could be game-changing for industries like shoes, tires, , and even electronics, decreasing manufacturing time while increasing product durability and longevity.

The material is manufactured using a 3-D printing method that uses photopolymerization. This process uses light to solidify a liquid resin in a desired shape or geometry. To make it self-healable, they had to dive a little deeper into the chemistry behind the material.

Photopolymerization is achieved through a reaction with a certain chemical group called thiols. By adding an oxidizer to the equation, thiols transform into another group called disulfides. It is the disulfide group that is able to reform when broken, leading to the self-healing ability. Finding the right ratio between these two groups was the key to unlocking the materials' unique properties.

Assistant Professor Qiming Wang and his team created a 3D-printed rubber material that is able to repair itself after breaking. Here, the material was used for a soft robotic actuator that is able to lift a weight before and after being cut in half. Credit: Kunhao Yu
"When we gradually increase the oxidant, the self-healing behavior becomes stronger, but the photopolymerization behavior becomes weaker," explained Wang. "There is competition between these two behaviors. And eventually we found the ratio that can enable both high self-healing and relatively rapid photopolymerization."

In just 5 seconds, they can print a 17.5-millimeter square, completing whole objects in around 20 minutes that can repair themselves in just a few hours. In their study, published in NPG Asia Materials, they demonstrate their material's ability on a range of products, including a shoe pad, a soft robot, a multiphase composite, and an electronic sensor.

After being cut in half, in just two hours at 60 degrees Celsius (four for the electronics due to the carbon used to transmit electricity) they healed completely, retaining their strength and function. The repair time can be decreased just by raising the temperature.

"We actually show that under different temperatures—from 40 degrees Celsius to 60 degrees Celsius—the material can heal to almost 100 percent," said Yu, who was first-author of the study and is studying structural engineering. "By changing the temperature, we can manipulate the healing speed, even under the material can still self-heal"

After conquering 3-D-printable soft materials, they are now working to develop different self-healable materials along a range of stiffnesses, from the current soft rubber, to rigid hard-plastics. These could be used for vehicle parts, composite , and even body armor.

Explore further: Self-healing material a breakthrough for bio-inspired robotics

Related Stories

New soft rubber for creating self-healing robots

August 17, 2017

(Tech Xplore)—A team of researchers at Vrije Universiteit Brussel has developed a type of rubber that can be used with robots to allow them to self-heal when cut. In their paper published in the journal Science Robotics, ...

Self-healing materials for semi-dry conditions

November 10, 2016

Before we have self-healing cars or buildings, we need strong materials that can fully self-repair in water-free environments. Self-healing materials work very well if they are soft and wet, but research groups have found ...

Recommended for you

After a reset, Сuriosity is operating normally

February 23, 2019

NASA's Curiosity rover is busy making new discoveries on Mars. The rover has been climbing Mount Sharp since 2014 and recently reached a clay region that may offer new clues about the ancient Martian environment's potential ...

Study: With Twitter, race of the messenger matters

February 23, 2019

When NFL player Colin Kaepernick took a knee during the national anthem to protest police brutality and racial injustice, the ensuing debate took traditional and social media by storm. University of Kansas researchers have ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.