NASA's Mars InSight flexes its arm

December 7, 2018 by Andrew Good, NASA
This image from InSight's robotic-arm mounted Instrument Deployment Camera shows the instruments on the spacecraft's deck, with the Martian surface of Elysium Planitia in the background. The image was received on Dec. 4, 2018 (Sol 8). Credit: NASA/JPL-Caltech

New images from NASA's Mars InSight lander show its robotic arm is ready to do some lifting.

With a reach of nearly 6 feet (2 meters), the arm will be used to pick up from the lander's deck, gently setting them on the Martian surface at Elysium Planitia, the lava plain where InSight touched down on Nov. 26.

But first, the arm will use its Instrument Deployment Camera, located on its elbow, to take photos of the terrain in front of the lander. These images will help mission team members determine where to set InSight's seismometer and heat flow probe - the only instruments ever to be robotically placed on the surface of another planet.

"Today we can see the first glimpses of our workspace," said Bruce Banerdt, the mission's principal investigator at NASA's Jet Propulsion Laboratory in Pasadena, California. "By early next week, we'll be imaging it in finer detail and creating a full mosaic."

Another camera, called the Instrument Context Camera, is located under the lander's deck. It will also offer views of the workspace, though the view won't be as pretty.

"We had a protective cover on the Instrument Context Camera, but somehow dust still managed to get onto the lens," said Tom Hoffman of JPL, InSight's project manager. "While this is unfortunate, it will not affect the role of the camera, which is to take images of the area in front of the lander where our instruments will eventually be placed."

An image of InSight's robotic arm, with its scoop and stowed grapple, poised above the Martian soil. The image was received on Dec. 4, 2018 (Sol 8). Credit: NASA/JPL-Caltech

Placement is critical, and the team is proceeding with caution. Two to three months could go by before the instruments have been situated and calibrated.

Over the past week and a half, mission engineers have been testing those instruments and , ensuring they're in working order. A couple instruments are even recording data: a drop in air pressure, possibly caused by a passing dust devil, was detected by the pressure sensor. This, along with a magnetometer and a set of wind and temperature sensors, are part of a package called the Auxiliary Payload Sensor Subsystem, which will collect meteorological data.

More images from InSight's arm were scheduled to come down this past weekend. However, imaging was momentarily interrupted, resuming the following day. During the first few weeks in its new home, InSight has been instructed to be extra careful, so anything unexpected will trigger what's called a fault. Considered routine, it causes the spacecraft to stop what it is doing and ask for help from operators on the ground.

A partial view of the deck of NASA's InSight lander, where it stands on the Martian plains Elysium Planitia. The image was received on Dec. 4, 2018 (Sol 8). Image Credit: NASA/JPL-Caltech
"We did extensive testing on Earth. But we know that everything is a little different for the lander on Mars, so faults are not unusual," Hoffman said. "They can delay operations, but we're not in a rush. We want to be sure that each operation that we perform on Mars is safe, so we set our safety monitors to be fairly sensitive initially."

Spacecraft engineers had already factored extra time into their estimates for deployment to account for likely delays caused by faults. The mission's primary mission is scheduled for two Earth years, or one Mars year - plenty of time to gather data from the Red Planet's surface.

Explore further: InSight is catching rays on Mars

More information: For more information about InSight, visit mars.nasa.gov/insight/

Related Stories

InSight is catching rays on Mars

November 27, 2018

NASA's InSight has sent signals to Earth indicating that its solar panels are open and collecting sunlight on the Martian surface. NASA's Mars Odyssey orbiter relayed the signals, which were received on Earth at about 5:30 ...

Mars new home 'a large sandbox'

December 2, 2018

With InSight safely on the surface of Mars, the mission team at NASA's Jet Propulsion Laboratory in Pasadena, California, is busy learning more about the spacecraft's landing site. They knew when InSight landed on Nov. 26 ...

NASA ready to study heart of Mars

March 30, 2018

NASA is about to go on a journey to study the interior of Mars. The space agency held a news conference today at its Jet Propulsion Laboratory (JPL) in Pasadena, California, detailing the next mission to the Red Planet.

Recommended for you

Rosetta witnesses birth of baby bow shock around comet

December 12, 2018

A new study reveals that, contrary to first impressions, Rosetta did detect signs of an infant bow shock at the comet it explored for two years – the first ever seen forming anywhere in the solar system.

Periodic radio signal detected from the blazar J1043+2408

December 12, 2018

Using Owens Valley Radio Observatory (OVRO), astronomers have detected a periodic signal in the radio light curve of the blazar J1043+2408, which could be helpful in improving our understanding about the nature of blazars ...

InSight Mars lander takes its first selfie

December 12, 2018

NASA's InSight lander isn't camera-shy. The spacecraft used a camera on its robotic arm to take its first selfie—a mosaic made up of 11 images. This is the same imaging process used by NASA's Curiosity rover mission, in ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.