Researchers develop technique that could detect explosives, dangerous gases rapidly and remotely

September 29, 2017 by Morgan Sherburne
Credit: University of Michigan

University of Michigan researchers have developed a laser-based method that could be used to detect chemicals such as explosives and dangerous gases quickly and accurately.

Eventually, this method could be used in systems placed in airports, for the environmental monitoring of pollutants or even in battlefields, said author Steven Cundiff, physics professor in the College of Literature, Science, and the Arts. The study, conducted by physics research fellow Bachana Lomsadze, publishes today in Science.

Lomsadze and Cundiff's method combines two techniques that speed up laser-based detection of chemicals while doing so accurately. The first technique is based on the same idea as nuclear , which uses radio frequencies to identify the structure of molecules. Here, the researchers use a method called multi-dimensional coherent spectroscopy, or MDCS. MDCS uses to read types of gases like a bar code. When the scientists bounce the laser pulses through the mixture of gases, those pulses can "read" the specific wavelengths of light—or color—that specific gases absorb.

"If you have light going through the gas, and, for example, you use a prism to separate white light into colored light, in the rainbow spectrum you'd see there'd be black stripes," Cundiff said. "Where the black stripes are almost gives you a barcode that tells you what kind of molecule is in the sample."

Scientists have been working on similar, simpler methods. Many important molecules have a very rich spectra for certain colors of light—although the "colors" may actually be in the infrared, so not visible the human eye—which makes them easily identifiable. But this becomes difficult when scientists try to identify gases in a mixture. Previously, scientists relied on comparing what they measured against a catalogue of molecules, a process that requires and a significant amount of time.

"It's like trying to look at three people's fingerprints on top of each other. This is a stumbling block for using these methods in a real-world situation," Cundiff said. "Our method takes about 15 minutes to a few hours using traditional approaches to MDCS."

To speed up the process while preserving its accuracy, the U-M researchers combined MDCS with another method called dual comb spectroscopy.

Frequency combs are laser sources that generate spectra consisting of equally spaced sharp lines that are used as rulers to measure the spectral features of atoms and molecules with extremely high precision. In spectroscopy, using two , known as dual comb spectroscopy, provides an elegant way to rapidly acquire a high resolution spectrum without mechanical moving elements such as a "corner cube," which is three mirrors arranged to make one corner, used to reflect a laser beam directly back on itself. This element usually limits how long it takes for the researchers to measure a spectrum.

"This approach could allow the method of multidimensional coherent spectroscopy to escape the lab and be used for practical applications such as detecting explosives or monitoring atmospheric constituents," Cundiff said.

Lomsadze and Cundiff applied their method to a vapor of rubidium atoms that contained two rubidium isotopes. The frequency difference between absorption lines for the two isotopes is too small to be observed using traditional approaches to MDCS, but by using combs, Lomsadze and Cundiff were able to resolve these lines and assign the spectra of the isotopes based on how the energy levels were coupled to each other. Their is general and can be used to identify chemicals in a mixture without previously knowing the makeup of the mixture.

Next, the researchers plan to add a third laser that could even greater speed up their ability to identify gases. They also plan to use lasers based on fiber optics so that they can look further into infrared light, which would expand the number of chemicals they would be able to identify.

Explore further: One laser is enough

More information: Bachana Lomsadze et al. Frequency combs enable rapid and high-resolution multidimensional coherent spectroscopy, Science (2017). science.sciencemag.org/cgi/doi … 1126/science.aao1090

Related Stories

One laser is enough

May 12, 2017

Gases in the environment can be spectroscopically probed fast and precisely using so-called dual frequency combs. Researchers at ETH have now developed a method by which such frequency combs can be created much more simply ...

Recommended for you

Physicists design $100 handheld muon detector

November 20, 2017

At any given moment, the Earth's atmosphere is showered with high-energy cosmic rays that have been blasted from supernovae and other astrophysical phenomena far beyond the Solar System. When cosmic rays collide with the ...

A curious quirk brings organic diode lasers one step closer

November 20, 2017

Since their invention in 1962, semiconductor diode lasers have revolutionized communications and made possible information storage and retrieval in CDs, DVDs and Blu-ray devices. These diode lasers use inorganic semiconductors ...

Carefully crafted light pulses control neuron activity

November 17, 2017

Specially tailored, ultrafast pulses of light can trigger neurons to fire and could one day help patients with light-sensitive circadian or mood problems, according to a new study in mice at the University of Illinois.

Strain-free epitaxy of germanium film on mica

November 17, 2017

Germanium, an elemental semiconductor, was the material of choice in the early history of electronic devices, before it was largely replaced by silicon. But due to its high charge carrier mobility—higher than silicon by ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.