Research team develops world's first ciliary stroke motion microrobots

September 1, 2016
(a) SEM image of microorganism, Paramecium, using ciliary stroke motion. (b) Design layouts for artificial ciliary microrobots. (c) Overall fabrication process for the ciliary microrobot using 3D laser lithography and metal sputtering. (d) SEM image of ciliary stroke motion microrobots developed by Prof. Choi’s research team (3D view, scale bar = 100 μm) (e) SEM image of ciliary stroke motion microrobots developed by Prof. Choi’s research team (top view, scale bar = 100 μm). Credit: DGIST

A research team at Daegu Gyeongbuk Institute of Science and Technology (DGIST), South Korea, developed ciliary microrobots for chemical and cell delivery that can be precisely controlled and that move via paramecium-like ciliary motion.

DGIST announced on Tuesday August 2, 2016 that Professor Choi Hong-soo's research team from the Department of Robotics Engineering developed ciliary microrobots with high propulsion efficiency in highly-viscous fluid environments in the human body such as blood by mimicking the movement of paramecia's cilia.

Professor Choi's research team succeeded in fabricating the world's first ciliary microrobots utilizing ultra-fine three-dimensional processing and asymmetric magnetic drive technology by applying microorganism's ciliary movement, which thus far had only been theorized but never put into practice.

Microfluidic environments in which microorganisms move include highly viscous environments like the human body's internal fluids; thus, in a macro environment, it is difficult to create propulsion with swimming-based mechanisms such as inertia-based symmetrical rowing like that used by large animals such as humans. As such, microorganisms moving in highly-viscous environments utilize various other propulsion techniques such as spiral drive , progressive wave motion, ciliary asymmetric reciprocating motion, and the like.

Microrobots that use propulsion mechanisms such as spiral drive motion and progressive wave motion were first realized and implemented at the Zurich Federal Institute of Technology, Switzerland; University of Twente, Netherlands; and Harvard University, USA. However, the development of microrobots that move utilizing ciliary motion has thus far been absent due to the difficulty of producing a microstructure with a large number of cilia as well as with asymmetrical drive.

Research team develops world’s first ciliary stroke motion microrobots
(a) Screen capture of linear motion of ciliary microrobots according to reciprocating magnetic drive under magnetic field control (b) Screen capture of rotary motion of ciliary microrobots according to reciprocating magnetic axis rotation under magnetic field control (c) The movement of ciliary microrobots tracing the letters D. G. I. S. T. Credit: DGIST

Professor Choi's research team has produced a ciliary microrobot with nickel and titanium coating on top of photo-curable polymer material, using three-dimensional laser process technology and precise metal coating techniques.

In addition, the team verified that the speed and propulsion efficiency of their newly-developed microrobots were much higher than those of existing conventional microrobots moving under magnetic attraction drive after measuring the ciliary microrobots' movement utilizing asymmetrical magnetic actuation technology.

The maximum speed of ciliary microrobots with a length of 220 micrometers and a height of 60 micrometers is 340 micrometers per second, thus they can move at least 8.6 times faster and as much as 25.8 times faster than conventional microrobots moving under magnetic attraction drive.

In comparison to previously developed microrobots, Professor Choi's ciliary microrobots are expected to deliver higher amounts of chemicals and cells to target areas in the highly viscous body environment thanks to their ability to freely change direction and to move in an 80 micrometer-diameter sphere to the target point shown in the experiment using the magnetic field.

Professor Choi from DGIST's Department of Robotics Engineering said, "With precise three-dimensional fabrication techniques and magnetic control technology, my team has developed microrobots mimicking cilia's asymmetric reciprocation movement, which has been never realized so far. We'll continually strive to study and experiment on microrobots that can efficiently move and operate in the , so that they can be utilized in chemical and cell delivery as well as in non-invasive surgery."

Explore further: New remote-controlled microrobots for medical operations

More information: Sangwon Kim et al. Fabrication and Manipulation of Ciliary Microrobots with Non-reciprocal Magnetic Actuation, Scientific Reports (2016). DOI: 10.1038/srep30713

Related Stories

New remote-controlled microrobots for medical operations

July 22, 2016

For the past few years, scientists around the world have been studying ways to use miniature robots to better treat a variety of diseases. The robots are designed to enter the human body, where they can deliver drugs at specificlocations ...

Microagents with revolutionary potential

March 22, 2016

Micro and nanorobots that attack tumors with maximum precision using drugs: this is what the fight against cancer may look like in the future. A group of ETH researchers led by Salvador Pané are laying the foundations with ...

Recommended for you

Startup Pi out to slice the charging cord

September 19, 2017

Silicon Valley youngster Pi on Monday claimed it had developed the world's first wireless charger that does away with cords or mats to charge devices.

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.