DNA origami lights up a microscopic glowing Van Gogh

July 12, 2016, California Institute of Technology
This reproduction of The Starry Night contains 65,536 glowing pixels and is just the width of a dime across. Credit: Paul Rothemund and Ashwin Gopinath/Caltech

Using folded DNA to precisely place glowing molecules within microscopic light resonators, researchers at Caltech have created one of the world's smallest reproductions of Vincent van Gogh's The Starry Night. The reproduction and the technique used to create it are described in a paper published in the advance online edition of the journal Nature on July 11.

The monochrome image—just the width of a dime across—was a proof-of-concept project that demonstrated, for the first time, how the precision placement of DNA origami can be used to build chip-based devices like computer circuits at smaller scales than ever before.

DNA origami, developed 10 years ago by Caltech's Paul Rothemund (BS '94), is a technique that allows researchers to fold a long strand of DNA into any desired shape. The folded DNA then acts as a scaffold onto which researchers can attach and organize all kinds of nanometer-scale components, from fluorescent molecules to electrically conductive carbon nanotubes to drugs.

"Think of it a bit like the pegboards people use to organize tools in their garages, only in this case, the pegboard assembles itself from DNA strands and the tools likewise find their own positions," says Rothemund, research professor of bioengineering, computing and mathematical sciences, and computation and neural systems. "It all happens in a test tube without human intervention, which is important because all of the parts are too small to manipulate efficiently, and we want to make billions of devices."

The process has the potential to influence a variety of applications from drug delivery to the construction of nanoscale computers. But for many applications, organizing nanoscale components to create devices on DNA pegboards is not enough; the devices have to be wired together into larger circuits and need to have a way of communicating with larger-scale devices.

One early approach was to make electrodes first, and then scatter devices randomly on a surface, with the expectation that at least a few would land where desired, a method Rothemund describes as "spray and pray."

In 2009, Rothemund and colleagues at IBM Research first described a technique through which DNA origami can be positioned at precise locations on surfaces using electron-beam lithography to etch sticky binding sites that have the same shape as the origami. For example, triangular sticky patches bind triangularly folded DNA.

Over the last seven years, Rothemund and Ashwin Gopinath, senior postdoctoral scholar in bioengineering at Caltech, have refined and extended this technique so that DNA shapes can be precisely positioned on almost any surface used in the manufacture of computer chips. In the Nature paper, they report the first application of the technique—using DNA origami to install fluorescent molecules into microscopic light sources.

"It's like using DNA origami to screw molecular light bulbs into microscopic lamps," Rothemund says.

In this case, the lamps are microfabricated structures called photonic crystal cavities (PCCs), which are tuned to resonate at a particular wavelength of light, much like a tuning fork vibrates with a particular pitch. Created within a thin glass-like membrane, a PCC takes the form of a bacterium-shaped defect within an otherwise perfect honeycomb of holes.

"Depending on the exact size and spacing of the holes, a particular wavelength of light reflects off the edge of the cavity and gets trapped inside," says Gopinath, the lead author of the study. He built PCCs that are tuned to resonate at around 660 nanometers, the wavelength corresponding to a deep shade of the color red. Fluorescent molecules tuned to glow at a similar wavelength light up the lamps—provided they stick to exactly the right place within the PCC.

"A fluorescent molecule tuned to the same color as a PCC actually glows more brightly inside the cavity, but the strength of this coupling effect depends strongly on the molecule's position within the cavity. A few tens of nanometers is the difference between the molecule glowing brightly, or not at all," Gopinath says.

By moving DNA origami through the PCCs in 20-nanometer steps, the researchers found that they could map out a checkerboard pattern of hot and cold spots, where the molecular light bulbs either glowed weakly or strongly. As a result, they were able to use DNA origami to position fluorescent molecules to make lamps of varying intensity. Similar structures have been proposed to power quantum computers and for use in other optical applications that require many tiny light sources integrated together on a single chip.

"All previous work coupling to PCCs only successfully created a handful of working lamps, owing to the extraordinary difficulty of reproducibly controlling the number and position of emitters in a cavity," Gopinath says. To prove their new technology, the researchers decided to scale-up and provide a visually compelling demonstration. By creating PCCs with different numbers of binding sites, Gopinath was able to reliably install any number from zero to seven DNA origami, allowing him to digitally control the brightness of each lamp. He treated each lamp as a pixel with one of eight different intensities, and produced an array of 65,536 of the PCC pixels (a 256 x 256 pixel grid) to create a reproduction of Van Gogh's "The Starry Night."

Now that the team can reliably combine molecules with PCCs, they are working to improve the light emitters. Currently, the last about 45 seconds before reacting with oxygen and "burning out," and they emit a few shades of red rather than a single pure color. Solving both these problems will help with applications such as quantum computers.

"Aside from applications, there's a lot of fundamental science to be done," Gopinath says.

Explore further: DNA origami: Folded DNA as a building material for molecular devices

More information: Ashwin Gopinath et al, Engineering and mapping nanocavity emission via precision placement of DNA origami, Nature (2016). DOI: 10.1038/nature18287

Related Stories

'Origami' is reshaping DNA's future

July 6, 2016

Ten years after its introduction, DNA origami, a fast and simple way to assemble DNA into potentially useful structures, is finally coming into its own.

Scientists fold RNA origami from a single strand

August 14, 2014

RNA origami is a new method for organizing molecules on the nanoscale. Using just a single strand of RNA, many complicated shapes can be fabricated by this technique. Unlike existing methods for folding DNA molecules, RNA ...

Using DNA origami to build nanodevices of the future

August 31, 2015

Scientists have been studying ways to use synthetic DNA as a building block for smaller and faster devices. DNA has the advantage of being inherently "coded". Each DNA strand is formed of one of four "codes" that can link ...

Unfolding the mysteries of DNA origami

August 20, 2015

Experiments performed by a University of York physicist have provided new insights into how DNA assembles into nanostructures, paving the way for more precise use in technology and medicine.

Recommended for you

Light-based production of drug-discovery molecules

February 18, 2019

Photoelectrochemical (PEC) cells are widely studied for the conversion of solar energy into chemical fuels. They use photocathodes and photoanodes to "split" water into hydrogen and oxygen respectively. PEC cells can work ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.