Anatomy of a microscopic wood chipper: New observations reveal how an individual cellulase enzyme operates

December 10, 2015 by David Salisbury
Anatomy of a microscopic wood chipper: New observations reveal how an individual cellulase enzyme operates
Illustration of the system used to measure the behavior of an individual cellulase molecule. The red shape represents the atomic tweezers that use laser light to manipulate small objects. The blue sphere represents the plastic microsphere that the atomic tweezers can manipulate. The strand of DNA that links the cellulase enzyme to the microsphere is colored gray. The enzyme structure is shown in yellow. The green bars represent strands of cellulose. Credit: Matthew Lang/Vanderbilt

TrCel7a is a cellulase: a special enzyme that breaks down cellulose, the most plentiful natural polymer on the planet.

The works like a microscopic wood chipper. It swallows strands of tightly bound cellulose and breaks them down into simple sugars. It works very slowly but, like a truck operating at a very low gear, it is extremely difficult to stop once it gets going. It is also self-propelling, powered in large part by energy from the cellulose bonds that it breaks.

Finding ways to make enzymes like TrCel7a operate faster and more efficiently could be the key to transforming ethanol made from cellulose into a major new renewable fuel source. In the U.S. each year an estimated 323 million tons of cellulosic wastes are thrown away—enough to provide as much as 30 percent of current fuel consumption.

"Until now, this system has been something of a black box at the molecular level. We knew what these enzymes did but we didn't know how they worked," said Matthew Lang, professor of chemical and biomolecular engineering at Vanderbilt University.

Working in the Lang Lab, doctoral student Sonia Brady has broken open this in the case of TrCel7A and looked inside. Borrowing a technique biophysicists use to study other molecular motors, she has measured the behavior of the enzyme and its constituent parts in unprecedented detail. The results of the study were published Dec. 10, 2015 in the online journal Nature Communications.

"Measuring the behavior of an individual enzyme and its component parts is a new strategy in the study of cellulose decomposition," said Brady. "We hope that it will provide knowledge others can use to integrate biological strategies with industrial processes in new and exciting ways."

For the last eight years, the U.S. government has been backing a major program to develop advanced biofuels. One of the main areas of research in cellulosic ethanol has been to find the most effective and low-cost microorganisms and enzymes to use in the process. Much of this effort has centered on finding ways to get cellulase-producing microorganisms to make larger amounts of these enzymes.

Brady and Lang, on the other hand, decided to study the way individual cellulase enzymes work. To do so, they selected a cellulase produced by the filamentous fungus Trichoderma reesei, one of the microorganisms used commercially to decompose cellulose. T. reesei produces a cocktail of three different enzymes that it uses for this purpose, 60 percent of which (by mass) is TrCel7A.

To get the first direct measurements of the mechanical properties of individual TrCel7A molecules, the researchers used an instrument called optical tweezers, which grasp and manipulate extremely small objects with a laser beam. They don't work on anything as small as an enzyme, however. So the researchers had to attach tiny polystyrene spheres to individual molecules. (Imagine a person holding the tether of one of the balloons in the Macy's Thanksgiving Day Parade.)

Once such a sphere is attached and the enzyme is placed on a cellulose fiber, it drags the sphere behind it as it works. This allowed the researchers to track its otherwise invisible movements. Equally as important, the researchers could grab the sphere with the and exert force on it ... force that is transferred to the enzyme. By assisting and resisting the enzyme's motion, the researchers determined how much force it takes to slow TrCel7A down and how much it speeds up when it is pulled along.

The researchers discovered that the enzyme is very slow. It creeps along a cellulose strand at an average of only 0.25 nanometers per second. That's about the width of 10 hydrogen atoms per second. And they found that its movement consisted of an alternation of one-nanometer steps and dwell times of varying lengths.

"It doesn't look as if it's very easy to increase the step length because it appears to be directly related to the length of the glucose units in the cellulose that it is breaking apart," said Lang. "However, when we applied an assisting force we could double to enzyme's velocity by reducing the dwell times."

In addition, the researchers broke down the enzyme into its component parts and clarified the role that each of the parts play.

Anatomy of a microscopic wood chipper
A photograph of a front and side-views of the catalytic domain of the cellulase TrCel7a shows how the enzyme ingests strands of cellulose, shown in green. Credit: Sonia Brady, Lang Lab, Vanderbilt University

TrCel7a has three basic components: a main 'catalytic domain (CD),' a much smaller 'carbohydrate-binding module (CBM)' and a flexible 'linker domain (LD)' that connects the two.

"We call the CBM and LD the CD's ball and chain," said Lang.

Using the enzyme's genetic blueprint, the researchers made versions of the catalytic domain without the LD and CBM attached. They discovered that once this naked CD found a strand of cellulose to chew on, it behaved in an identical fashion to the whole enzyme.

"This raised the question of why the CD keeps its ball and chain," Lang said.

The answer seems to be that by attaching to cellulose fiber, the CBM holds the CD in the immediate vicinity of the fiber so it can find loose ends that it can ingest more readily. Their studies show that the rate at which CD without its ball and chain initiates processing of cellulose is only 1/50th that of the whole enzyme.

One of the limitations of TrCel7A is that it needs to find a broken end of a strand to begin working. That is the reason T. reesei produces another type of enzyme called an endocellulase. This takes short chunks of , essentially creating loose ends that TrCel7A can begin digesting. As a result, the decomposition rate of the two enzymes working together is substantially higher than what they can achieve working independently.

According to Lang, the next step in their research is to study how ensembles of these enzymes work together at the molecular level.

Explore further: Researchers uncover structure of enzyme that makes plant cellulose

More information: Sonia K. Brady et al. Cellobiohydrolase 1 from Trichoderma reesei degrades cellulose in single cellobiose steps, Nature Communications (2015). DOI: 10.1038/ncomms10149

Related Stories

Recommended for you

Tasmanian tiger doomed long before humans came along

December 12, 2017

The Tasmanian tiger was doomed long before humans began hunting the enigmatic marsupial, scientists said Tuesday, with DNA sequencing showing it was in poor genetic health for thousands of years before its extinction.

Searching for the CRISPR Swiss-army knife

December 12, 2017

Scientists at the University of Copenhagen, led by the Spanish Professor Guillermo Montoya, are investigating the molecular features of different molecular scissors of the CRISPR-Cas system to shed light on the so-called ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.