CubeSats to an asteroid

CubeSats to an asteroid
ESA's Asteroid Impact Mission is joined by two triple-unit CubeSats to observe the impact of the NASA-led Demonstration of Autonomous Rendezvous Technology (DART) probe with the secondary Didymos asteroid, planned for late 2022. Credit: ESA -

The five CubeSat concepts to be studied to accompany ESA's proposed Asteroid Impact Mission into deep space have been selected.

The ideas being looked at include taking a close-up look at the composition of the asteroid surface, measuring the gravity field, assessing the dust and ejecta plumes created during a collision, and landing a CubeSat for .

The Asteroid Impact Mission, or AIM, undergoing detailed design ahead of a final go/no-go decision by ESA's Ministerial Council in December 2016, is a technology-demonstration mission that would also be humanity's first probe to rendezvous with a double asteroid.

AIM is also set to be Europe's contribution to a larger international endeavour called the Asteroid Impact & Deflection Assessment (AIDA) mission: the US Double Asteroid Redirection Test (DART) would strike the smaller of the two Didymos asteroids, with AIM on hand for before-and-after monitoring of any resulting orbital and structural shifts.

Like a Russian doll, the main AIM spacecraft would carry smaller probes within it: the Mascot-2 lander from the DLR German Aerospace Center, and an additional pair of triple-unit CubeSats.

"CubeSats are nanosatellites based on standardised 10 cm-sized units, which are much cheaper and simpler to build than standard satellites, suitable for higher-risk missions such as envisaged for AIM," explains Roger Walker, overseeing ESA's technology CubeSat effort.

CubeSats to an asteroid
A pair of triple-unit CubeSats. ESA's 2020 Asteroid Impact Mission spacecraft will have room to carry six CubeSat units – potentially single-unit miniature spacecraft but more probably a pair of larger CubeSats as seen here. Credit: ESA–

"They would in this case be deployed in the vicinity of the asteroid during the DART impact.

"Usually, CubeSats offer an easy means of scientists to launch their experiments into low-Earth orbit. But with AIM we are giving European research teams the chance to design instruments based on the CubeSat standard for deep space, to do specialised scientific work that will complement AIM's main science goals.

"CubeSat hardware is easy for this community to access and adapt to their needs. It´s like taking inexpensive building kits to do top-notch science."

"We put out a call for ideas for these CubeSat Opportunity Payloads through the SysNova initiative of ESA's General Studies Programme," says Andrés Galvez, Head of the Science Analysis and System Support Unit, which looks at how new instruments could be used in planned space missions.

"Through SysNova we set technology challenges to get competing concepts we can then assess in detail ahead of making a final choice.

CubeSats to an asteroid
ESA's proposed Asteroid Impact Mission to the Didymos binary asteroid system will carry two ‘CubeSat Opportunity Payloads (COPINS)’ to support the science goals of the main spacecraft plus its lander, as well demonstrate deep space inter-satellite link techniques. Credit: ESA -

"There were a large number of proposals to the call and teams variously put forward concepts involving either one or two triple-unit CubeSats. We were very pleased by the response and the diversity of scientific missions put forward with such small satellites."

The selected proposals will now be funded by ESA for detailed study, ahead of a final selection to fill the two berths in June next year.

CubeSats to an asteroid
Credit: ESA–

  • AGEX (Royal Observatory of Belgium, ISAE-SUPAERO, Antwerp Space, EMXYS, Asteroid Initiatives Ltd). A CubeSat touches down to assess the surface material, surface gravity, subsurface structure and of the DART impact effects. Another CubeSat in orbit deploys smaller 'chipsats' dispersed over the asteroid.
  • ASPECT (VTT Technical Research Centre of Finland, University of Helsinki, Aalto University Foundation). A CubeSat equipped with a near-infrared spectrometer to assess the asteroid composition and effects of space weathering and metamorphic shock, as well as post-impact plume observations.
  • DustCube (University of Vigo, Micos Engineering GmbH, University of Bologna). A CubeSat to measure the size, shape and concentration of fine dust ejected in the aftermath of the collision and its evolution over time.
  • CUBATA (GMV, Sapienza University of Rome, INTA). Two CubeSats measure the asteroid system's pre- and post-impact through Doppler tracking of CubeSats, as well as performing close range imaging of the impact event.
  • PALS (Swedish Institute of Space Physics, Institute for Space Sciences IEEC, Royal Institute of Technology KTH, AAC Microtec, DLR). Two CubeSats characterise the magnetisation, bulk chemical composition and presence of volatiles of the impact ejecta, as well as perform very high resolution imaging of the ejecta components.

With these opportunity payloads, ESA is applying current European technology miniaturisation efforts to explore our wider Solar System in unprecedented ways, lowering the cost and risk of interplanetary missions.

Explore further

CubeSats offered deep-space ride on ESA asteroid probe

Citation: CubeSats to an asteroid (2015, November 3) retrieved 15 October 2019 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors

User comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more