Physicists pave the way for more energy efficient technology

February 28, 2014

An international team of scientists led by physicists from the University of York has paved the way for a new class of magnetic materials and devices with improved performance and power efficiency.

Magnetic materials are currently used to store almost all digital information. However, with information processing and storage now making up a significant fraction of the world's energy consumption, continuing improvements in will require new technologies and materials.

A promising development is all-optical thermally induced magnetic switching (TIMS), which uses ultrafast laser pulses to change the magnetic state of the material, equivalent to writing a single bit of data. In all-optical switching there is no need to use magnetic fields to write the data and so a significant reduction in power consumption can be made. Moreover, the deposited laser energy per written bit is much smaller.

Until now, only rare-earth-transition-metal alloys called ferrimagnets have been shown to exhibit all-optical switching. However, these materials are both difficult to produce at the nanoscale necessary for technological devices and expensive due to their use of rare-earth metals such as Gadolinium (Gd) and Terbium (Tb).

Now new research, led by York's Department of Physics and involving scientists from Helmholtz-Zentrum Berlin (HZB), Germany and Radboud University Nijmegen, the Netherlands offers a new possibility for all-optical switching.

The research, published in Applied Physics Letters, demonstrates the use of a synthetic ferrimagnet - a sandwich of two ferromagnetic materials and a non-magnetic spacer layer. The spacer layer engineers the coupling between the two ferromagnets so that they align opposite to one another. When subjected to an ultrafast laser pulse this structure spontaneously switches its magnetic state representing writing a single bit of data.

Corresponding author Dr Richard Evans, from York's Department of Physics, said: "Energy efficiency is one of the most important goals for technological devices due to their expanding use with an increasing world population and resultant demand for energy.

"The synthetic ferrimagnet structure overcomes the intrinsic problems of rare-earth-transition-metal alloys and paves the way for a new class of and devices with improved performance and . The results are a significant step towards realising a device based on thermally induced switching as it shows that structures on the nanometre length scale can be used."

Co-author Professor Theo Rasing, Head of the Department Spectroscopy of Solids and Interfaces at Radboud University Nijmegen, said: "Since our original discovery of all-optical-switching of magnetic domains in these ferrimagnetic alloys more than five years ago, the fruitful collaboration between our experimental efforts, the possibilities provided by the unique instrumentation of the Helmholtz-Zentrum and the theoretical insight provided by the York team, has led to this truly European success."

Explore further: Researchers develop framework for understanding current-switched magnetic devices

Related Stories

Magnets are chaotic—and fast—at the very smallest scale

March 19, 2013

Using a new type of camera that makes extremely fast snapshots with an extremely high resolution, it is now possible to observe the behaviour of magnetic materials at the nanoscale. This behaviour is more chaotic than previously ...

Recommended for you

Quantum data takes a ride on sound waves

September 22, 2017

Yale scientists have created a simple-to-produce device that uses sound waves to store quantum information and convert it from one form to another, all inside a single, integrated chip.

A way to measure and control phonons

September 22, 2017

(—A team of researchers with the University of Vienna in Austria and Delft University of Technology in the Netherlands has developed a technique using photons for controlling and measuring phonons. In their paper ...

Gravitational waves may oscillate, just like neutrinos

September 21, 2017

(—Using data from the first-ever gravitational waves detected last year, along with a theoretical analysis, physicists have shown that gravitational waves may oscillate between two different forms called "g" and ...

Detecting cosmic rays from a galaxy far, far away

September 21, 2017

In an article published today in the journal Science, the Pierre Auger Collaboration has definitively answered the question of whether cosmic particles from outside the Milky Way Galaxy. The article, titled "Observation of ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Feb 28, 2014
I could be wrong but I would imagine that the amount of power used by the hard drive's motor would dwarf the power needed to write to the disk. The technology looks to be very promising but I doubt that it will save any meaningful amount of energy.
not rated yet Mar 01, 2014
The difference in energy between spinning the disk and everything else is probably given by the delta between idle and active power, which is typically 3x. Some of that will be to read and process the information, but I guess that means there may be something to save in the writing part.
not rated yet Mar 01, 2014
OK, I just bothered to search HD power requirements. A Seagate 4 TB requires 4.5W at idle and 6.5 W when operating. So that leaves a total of 2W for the electronics and positioning the heads. Plus that the average disk reads a lot more than it writes. So I ask you, how much power could this technology possibly save?

Also, you still need the magnetic heads to read the data that was written so there is no savings in rare materials.

It is an insult to our intelligence to promote this as an energy saving device. The green movement really suffers from a lack of reality.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.