Tailoring optical processors: Arranging nanoparticles in geometric patterns allows for control of light with light

May 21, 2013
By arranging optically tuned gold discs in a closely spaced pattern, Rice University scientists created intense electrical fields and enhanced the nonlinear optical properties of the system. Here a computer model displays the plasmonic interactions that give rise to the intense fields. Credit: Yu Zhang/Rice University

Rice University scientists have unveiled a robust new method for arranging metal nanoparticles in geometric patterns that can act as optical processors that transform incoming light signals into output of a different color. The breakthrough by a team of theoretical and applied physicists and engineers at Rice's Laboratory for Nanophotonics (LANP) is described this week in the Proceedings of the National Academy of Sciences.

Rice's team used the method to create an in which incoming light could be directly controlled with light via a process known as "four-wave mixing." Four-wave mixing has been widely studied, but Rice's disc-patterning method is the first that can produce materials that are tailored to perform four-wave mixing with a wide range of colored inputs and outputs.

"Versatility is one of the advantages of this process," said study co-author Naomi Halas, director of LANP and Rice's Stanley C. Moore Professor in Electrical and Computer Engineering and a professor of biomedical engineering, chemistry, physics and astronomy. "It allows us to mix colors in a very general way. That means not only can we send in beams of two different colors and get out a third color, but we can fine-tune the arrangements to create devices that are tailored to accept or produce a broad spectrum of colors."

The information processing that takes place inside today's computers, smartphones and tablets is electronic. Each of the billions of transistors in a computer chip uses electrical inputs to act upon and modify the passing through it. Processing information with light instead of electricity could allow for computers that are both faster and more energy-efficient, but building an is complicated by the quantum rules that light obeys.

Physicists and engineers from Rice's Laboratory for Nanophotonics have unveiled a robust new method for arranging metal nanoparticles in geometric patterns that can act as optical processors that transform incoming light signals into output of a different color. Credit: Yu Zhang/Rice University

"In most circumstances, one beam of light won't interact with another," said LANP Peter Nordlander, a co-author of the new study. "For instance, if you shine a flashlight at a wall and you cross that beam with the beam from a second flashlight, it won't matter. The light that comes out of the first flashlight will pass through, independent of the light from the second.

"This changes if the light is traveling in a 'nonlinear medium,'" he said. "The electromagnetic properties of a nonlinear medium are such that the light from one beam will interact with another. So, if you shine the two flashlights through a nonlinear medium, the intensity of the beam from the first flashlight will be reduced proportionally to the intensity of the second beam."

Rice unveils method for tailoring optical processors
Gold discs tuned to capture the energy from two incoming beams of light can produce output of a third color. Here a computer animation shows how the electromagnetic wave (red=positive, blue=negative) from the incoming light propagates through the system as a series of plasmonic waves. Credit: Yu-Rong Zhen/Rice University

The patterns of metal discs LANP scientists created for the PNAS study are a type of nonlinear media. The team used electron-beam lithography to etch puck-shaped gold discs that were placed on a transparent surface for optical testing. The diameter of each disc was about one-thousandth the width of a human hair. Each was designed to harvest the energy from a particular frequency of light; by arranging a dozen of the discs in a closely spaced pattern, the team was able to enhance the nonlinear properties of the system by creating intense electrical fields.

"Our system exploits a particular plasmonic effect called a Fano resonance to boost the efficiency of the relatively weak nonlinear effect that underlies four-wave mixing," Nordlander said. "The result is a boost in the intensity of the third color of that the device produces."

Graduate student and co-author Yu-Rong Zhen calculated the precise arrangement of 12 discs that would be required to produce two coherent Fano resonances in a single device, and graduate student and lead co-author Yu Zhang created the device that produced the four-wave mixing—the first such material ever created.

"The device Zhang created for four-wave mixing is the most efficient yet produced for that purpose, but the value of this research goes beyond the design for this particular device," said Halas, who was recently named a member of the National Academy of Sciences for her pioneering research in nanophotonics. "The methods used to create this device can be applied to the production of a wide range of nonlinear media, each with tailored optical properties."

Explore further: Plasmonics shows promise for optically induced graphene electronics

More information: www.pnas.org/cgi/doi/10.1073/pnas.1220304110

Related Stories

Physicists find right (and left) solution for on-chip optics

April 22, 2013

(Phys.org) —A Harvard-led team of researchers has created a new type of nanoscale device that converts an optical signal into waves that travel along a metal surface. Significantly, the device can recognize specific kinds ...

Manipulating light at will

August 1, 2011

Electrical engineers at Duke University have developed a material that allows them to manipulate light in much the same way that electronics manipulate flowing electrons.

Researchers discover a way to generate an electron Airy beam

February 22, 2013

(Phys.org)—A team of physicists in Israel has succeeded in generating an electron Airy beam for the first time. As they describe in their paper published in the journal Nature, the researchers used a technique similar to ...

Recommended for you

The microscopic origin of efficiency droop in LEDs

November 21, 2017

Light-emitting diodes—or LEDs, as they are commonly known—have been slowly replacing incandescent light bulbs in applications ranging from car taillights to indicators on electronics since their invention in the 1960s.

Borophene shines alone as 2-D plasmonic material

November 20, 2017

An atom-thick film of boron could be the first pure two-dimensional material able to emit visible and near-infrared light by activating its plasmons, according to Rice University scientists.


Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.