New kind of high-temperature photonic crystal could someday power everything from smartphones to spacecraft

February 3, 2012 by David L. Chandler
A microscope image of the tungsten photonic crystal structure reveals the precise uniform spacing of cavities formed in the material, which are tuned to specific wavelengths of light. Image courtesy of Y.X. Yeng et al.

A team of MIT researchers has developed a way of making a high-temperature version of a kind of materials called photonic crystals, using metals such as tungsten or tantalum. The new materials — which can operate at temperatures up to 1200 degrees Celsius — could find a wide variety of applications powering portable electronic devices, spacecraft to probe deep space, and new infrared light emitters that could be used as chemical detectors and sensors.

Compared to earlier attempts to make high-temperature photonic crystals, the new approach is “higher performance, simpler, robust and amenable to inexpensive large-scale production,” says Ivan Celanovic ScD ’06, senior author of a paper describing the work in the . The paper was co-authored by MIT professors John Joannopoulos and Marin Soljačić, graduate students Yi Xiang Yeng and Walker Chen, affiliate Michael Ghebrebrhan and former postdoc Peter Bermel.

These new high-temperature, two-dimensional photonic crystals can be fabricated almost entirely using standard microfabrication techniques and existing equipment for manufacturing computer chips, says Celanovic, a research engineer at MIT’s Institute for Soldier Nanotechnologies.

While there are natural photonic crystals — such as opals, whose iridescent colors result from a layered structure with a scale comparable to wavelengths of visible light — the current work involved a nanoengineered material tailored for the infrared range. All photonic crystals have a lattice of one kind of material interspersed with open spaces or a complementary material, so that they selectively allow certain wavelengths of light to pass through while others are absorbed. When used as emitters, they can selectively radiate certain wavelengths while strongly suppressing others.

Photonic crystals that can operate at very high temperatures could open up a suite of potential applications, including devices for solar-thermal conversion or solar-chemical conversion, radioisotope-powered devices, hydrocarbon-powered generators or components to wring energy from waste heat at powerplants or industrial facilities. But there have been many obstacles to creating such materials: The high temperatures can lead to evaporation, diffusion, corrosion, cracking, melting or rapid chemical reactions of the ’ nanostructures. To overcome these challenges, the MIT team used computationally guided design to create a structure from high-purity , using a geometry specifically designed to avoid damage when the material is heated.

NASA has taken an interest in the research because of its potential to provide long-term power for deep-space missions that cannot rely on solar power. These missions typically use radioisotope thermal generators (RTGs), which harness the power of a small amount of radioactive material. For example, the new Curiosity rover scheduled to arrive at Mars this summer uses an RTG system; it will be able to operate continuously for many years, unlike solar-powered rovers that have to hunker down for the winter when solar power is insufficient.

Other potential applications include more efficient ways of powering portable electronic devices. Instead of batteries, these devices could run on thermophotovoltaic generators that produce electricity from heat that is chemically generated by microreactors,  from a fuel such as butane. For a given weight and size, such systems could allow these devices to run up to 10 times longer than they do with existing batteries, Celanovic says.

Shawn Lin, a professor of physics at Rensselaer Polytechnic Institute who specializes in future chip-making technology, says that research on thermal radiation at high temperatures “continues to challenge our scientific understanding of the various emission processes at sub-wavelength scales, and our technological capability.” Lin, who was not involved in this work, adds, “This particular 2-D tungsten is quite unique, as it is easier to fabricate and also very robust against high-temperature operation.  This photonic-crystal design should find important application in solar-thermal energy-conversion systems.”

While it’s always hard to predict how long it will take for advances in basic science to lead to commercial products, Celanovic says he and his colleagues are already working on system integration and testing applications. There could be products based on this technology in as little as two years, he says, and most likely within five years.

In addition to producing power, the same photonic crystal can be used to produce precisely tuned wavelengths of infrared light. This could enable highly accurate spectroscopic analysis of materials and lead to sensitive chemical detectors, he says.

The research was partly supported by the Army Research Office through the Institute for Soldier Nanotechnologies, NASA and an MIT Energy Initiative seed grant, as well as by TeraGrid resources and the MIT S3TEC Energy Research Frontier Center of the U.S. Department of Energy.

Explore further: Sun-free photovoltaics

Related Stories

Sun-free photovoltaics

July 29, 2011

A new photovoltaic energy-conversion system developed at MIT can be powered solely by heat, generating electricity with no sunlight at all. While the principle involved is not new, a novel way of engineering the surface ...

A novel way to concentrate sun's heat

December 2, 2011

Most technologies for harnessing the sun’s energy capture the light itself, which is turned into electricity using photovoltaic materials. Others use the sun’s thermal energy, usually concentrating the sunlight ...

Biology rides to computers' aid

October 19, 2010

Photonic crystals are exotic materials with the ability to guide light beams through confined spaces and could be vital components of low-power computer chips that use light instead of electricity. Cost-effective ways of ...

Graphene shows unusual thermoelectric response to light

October 7, 2011

Graphene, an exotic form of carbon consisting of sheets a single atom thick, exhibits a novel reaction to light, MIT researchers have found: Sparked by light’s energy, the material can produce electric current in unusual ...

Recommended for you

Quantum data takes a ride on sound waves

September 22, 2017

Yale scientists have created a simple-to-produce device that uses sound waves to store quantum information and convert it from one form to another, all inside a single, integrated chip.

A way to measure and control phonons

September 22, 2017

(—A team of researchers with the University of Vienna in Austria and Delft University of Technology in the Netherlands has developed a technique using photons for controlling and measuring phonons. In their paper ...

New technique accurately digitizes transparent objects

September 21, 2017

A new imaging technique makes it possible to precisely digitize clear objects and their surroundings, an achievement that has eluded current state-of-the-art 3D rendering methods. The ability to create detailed, 3D digital ...

Gravitational waves may oscillate, just like neutrinos

September 21, 2017

(—Using data from the first-ever gravitational waves detected last year, along with a theoretical analysis, physicists have shown that gravitational waves may oscillate between two different forms called "g" and ...

Detecting cosmic rays from a galaxy far, far away

September 21, 2017

In an article published today in the journal Science, the Pierre Auger Collaboration has definitively answered the question of whether cosmic particles from outside the Milky Way Galaxy. The article, titled "Observation of ...


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (1) Feb 03, 2012
They're not Dilithium?
1 / 5 (1) Feb 03, 2012
Compared to earlier attempts to make high-temperature photonic crystals, the new approach is higher performance, simpler, robust and amenable to inexpensive large-scale production

That's the MIT quality work for you.
5 / 5 (1) Feb 03, 2012
Cheap solar panels are a lot like fusion. There are a lot of articles about them but they never show up.
5 / 5 (3) Feb 03, 2012
Somewhat confused... It's not clear to me how these crystals are to be used as a source of power. Can someone explain that?
not rated yet Feb 05, 2012
MIT is using 2D tungsten photonic crystals (PCs) to raise the efficiency of thermophotovoltaic (TPV) cells. The PCs are made up of a square array of micron-sized holes in a tungsten film that is one to a few microns thick. The PCs absorb broadband thermal radiation and re-emit it in wavelength bands that are tailored to match the high-efficiency spectral regions of TPV cells. TPV setup uses two different photonic crystals: A PC made up of alternating layers of silicon and silicon dioxide is placed between the tungsten PC and the TPV cell; the second PC serves as a selective reflector, further optimizing the wavelength band received by the TPV. Radiation rejected by the second PC is reflected back to the tungsten PC, where it is reabsorbed, further boosting efficiency. The tungsten film was patterned over a 1 cm diameter using interference lithography and reactive ion etching. Tungsten is used for the primary absorbing PC because it does not degrade at high temperatures.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.