Showcase UAV demonstrates 'Flapless Flight'

September 27, 2010

( -- A novel unmanned air vehicle (UAV) which showcases a wide range of new technologies has successfully demonstrated 'flapless flight' in the UK.

The UAV, called DEMON, made the historic flight from an airfield at Walney Island in Cumbria on Friday 17 September. Developed by Cranfield University, BAE Systems, and nine other UK universities, DEMON is designed to be able to forgo the use of conventional mechanical elevators and ailerons which usually control the movement of an aircraft in favour of novel aerodynamic control devices using blown jets of air.

Such an approach offers several advantages over ‘moving flap’ technology which has been used since the early days of aviation, in that it means fewer moving parts, less maintenance, and a more stealthy profile for the aircraft. DEMON’s trial flights were the first ‘flapless flights’ ever to be authorised by the UK Civil Aviation Authority.

In Cumbria, DEMON successfully demonstrated flapless flight when, for a planned portion of a test-flight, the conventional flap control system was turned off and the aircraft flew and manoeuvred using the new technology. BAE Systems promoted the development of the £6.2m FLAVIIR (Flapless Air Vehicle Integrated Industrial Research) programme which led to the DEMON demonstrator after laying down a ‘Grand Challenge’ to UK universities five years ago.

Professor John Fielding, chief engineer and lead for the DEMON demonstrator team from Cranfield University, said: “To make an aircraft fly and manoeuvre safely without the use of conventional control surfaces is an achievement in itself; to do that while at the same time bringing together new construction techniques and new control mechanisms could be said to be over-ambitious - but we have done it. The DEMON UAV has been developed within a research programme but it is a representative, complex, high technology aircraft. Gaining approval from the CAA and flying it successfully has required great skill, dedication and patience by the team and they should be very proud of their achievement.”

Richard Williams, BAE Systems programme director for Future Capability, said: “What the FLAVIIR Team have achieved in such a short time is nothing short of remarkable. I was in Cumbria to watch DEMON fly and I feel sure I have witnessed a significant moment in aviation history.” He added: “What makes it even more poignant is that this is the result of British brains collaborating to produce world-leading technology. It, and other initiatives like it, will help ensure we maintain both a level of sovereign capability and a competitive edge.”

The flapless system, developed around a concept called fluidic flight control, was the result of collaborative work between Cranfield and Manchester universities together with BAE Systems' Advanced Technology Centre and was tested in wind tunnels and on models before the full-scale trials on DEMON took place.

While Demon itself is not expected to become a production aircraft, a number of the technologies it contains have and will continue to filter through to a range of other aviation platforms.

DEMON Key Facts:

• Weight: 200 lbs (90 kg); Dimensions:approximately 8-foot (2.5m) wingspan Flight speed 70 -150kts.
• It was developed by BAE Systems and Cranfield University in the UK. It incorporates fluidic flight controls developed at Cranfield and Manchester Universities and flight control algorithms developed at Leicester University and Imperial College
• The DEMON is designed to fly with no conventional elevators or ailerons, getting its pitch and roll control from technologies which rely on blown air and so requires much fewer moving parts, therefore making it a lot easier to maintain and repair.
• DEMON can fly parts of its mission by itself but, as it is currently an experimental vehicle, is not fully autonomous unlike, for example, BAE Systems’ MANTIS.
• The shape of the DEMON aircraft is referred to as a "blended wing-body" configuration.

Explore further: We're flying without wing flaps and without a pilot

Related Stories

We're flying without wing flaps and without a pilot

March 21, 2006

The revolutionary model plane has been developed as part of a £6.2m programme, involving engineers from the University of Leicester, funded jointly by the Engineering and Physical Sciences Research Council and BAE Systems.

New Flying Wing Design Tested

November 10, 2005

For almost a hundred years most planes have looked like a tube with wings, but that may change thanks to NASA research. Engineers at NASA's Langley Research Center in Hampton, Va., are testing a design for a flying wing, ...

Team Uses Historic NASA Tunnel to Test Blended Wing Body

May 4, 2006

A historic NASA wind tunnel is helping test the prototype of a new, more fuel-efficient aircraft design. Boeing Phantom Works, St. Louis, has partnered with NASA's Aeronautics Research Mission Directorate and the U.S. Air ...

Boeing ScanEagle to Achieve European Air Show First

July 18, 2005

Boeing ScanEagle will become the first fixed wing Unmanned Aerial Vehicle (UAV) to fly at a European public air show, when it takes to the skies at the Royal International Air Tattoo (RIAT) at RAF Fairford, July 16 - 17. ...

Recommended for you

Forget oil, Russia goes crazy for cryptocurrency

August 16, 2017

Standing in a warehouse in a Moscow suburb, Dmitry Marinichev tries to speak over the deafening hum of hundreds of computers stacked on shelves hard at work mining for crypto money.

Researchers clarify mystery about proposed battery material

August 15, 2017

Battery researchers agree that one of the most promising possibilities for future battery technology is the lithium-air (or lithium-oxygen) battery, which could provide three times as much power for a given weight as today's ...

Signs of distracted driving—pounding heart, sweaty nose

August 15, 2017

Distracted driving—texting or absent-mindedness—claims thousands of lives a year. Researchers from the University of Houston and the Texas A&M Transportation Institute have produced an extensive dataset examining how ...


Adjust slider to filter visible comments by rank

Display comments: newest first

not rated yet Sep 27, 2010
The next step would be to utilize the kinetic force from these air-ducts to turbo-shafts with miniaturized turbines which power induction coupled microwave oscillators this will allow for optical propulsion systems and microwave emitting active surface plane stabilization and shielding. Doing so would increase the ceiling of operation with optical propulsion systems readying UAV's for space theatre.
5 / 5 (2) Sep 27, 2010
THere may be fewer VISIBLE moving parts w/ this system but how are they modulating the various streams of gas needed without a bunch of moving parts? Fluidic amps?

What is not mentioned is that w/ fluidic controls one could make a more stealthy vehicle and I suspect that is ultimately what is behind this.
not rated yet Sep 27, 2010
@sender: Wow, that was way over my head (no pun) explain or give references please.
not rated yet Sep 28, 2010
this only work up to sepcific altitude and velocity, due to lack of air in space and due to fluid dynamics changing at higher velocities.
not rated yet Sep 28, 2010
One snag: Like the Harrier 'jump jet' in hover mode, the control air flow probably needs the engine running. If they get a flame-out or bird-strike, they lose control...
not rated yet Sep 29, 2010
I was thinking EHD thrusters, but I see it must not use that technology.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.