Print your own lasers, lights and TV screens

July 1, 2010
Four different colours of quantum dots (photo: Raffaella Signorini, Padova University)

Imagine printing your own room lighting, lasers, or solar cells from inks you buy at the local newsagent. Jacek Jasieniak and his colleagues at CSIRO, the University of Melbourne and the University of Padua in Italy, have moved a step closer to such a future, by developing liquid inks based on quantum dots that can be used to print devices.

Imagine printing your own room lighting, lasers, or from inks you buy at the local newsagent. Jacek Jasieniak and his colleagues at CSIRO, the University of Melbourne and the University of Padua in Italy, have moved a step closer to such a future, by developing liquid inks based on quantum dots that can be used to print devices.

The first , invented 50 years ago in May 1960, was described as a solution looking for a problem. Today dozens of lasers are built into our computers, cars and homes. Soon, thanks to Jacek’s work, we may have millions of tiny lasers working in our homes lighting our rooms and even acting as pixels in printable TV screens. The lasers could also be used as components in optical computers, electronics, sensors, as cheap laser pointers in a range of colours or even fashion accessories.

A schematic of a quantum dot lasing device (photo: Raffaella Signorini, Padova University)

Jacek’s work is being presented for the first time in public through Fresh Science, a communication boot camp for early-career scientists held at the Melbourne Museum. Jacek was one of 16 winners from across Australia.

“Creating cheaper lasers relies heavily on progress in ,” Jacek says. “At present, lasers are manufactured using expensive materials and production techniques. To make them more cost effective, we have focused on developing materials that are cheap, function well as lasers, and can be printed. Quantum dots meet all these requirements.”

Quantum dots are made of grown as nanometre-sized crystals, around a millionth of a millimetre in diameter. The laser colour they produce can be selectively tuned by varying their size. To build a laser using quantum dots, you need to place them within a structure known as an . This structure acts to amplify the light that is produced by the quantum dots to produce the laser.

“Conventional lasers use large optical cavities which make them impossible to use for printable lasers. To develop true nanometre-sized lasers we have employed a special type of optical cavity that consists of a repeating nano-structured pattern on the surface of the material onto which the are printed. A major benefit of this nano-structured optical cavity is that it can be produced during the printing process by controlled indentation or scratching of the material’s surface,” Jacek says.

A prototype quantum lasing device (photo: Raffaella Signorini, Padova University)

“The tiny lasers generated using such an approach are highly efficient and can be adapted for numerous applications.”

In addition to lasers, this research has significant implications for many other future technologies which use liquid inks to develop printable components. One highly promising example is the production of thin-film solar cells, a research area that Jacek is also currently involved in at CSIRO.

Explore further: Quantum dots as midinfrared emitters

Related Stories

Quantum dots as midinfrared emitters

February 23, 2009

(PhysOrg.com) -- “People are interested in the mid-infrared,” Dan Wasserman tells PhysOrg.com. Infrared light has a wavelength longer than visible light, and many molecules have numerous very strong optical resonances ...

'Squeezing' light into quantum dots

April 1, 2009

(PhysOrg.com) -- “Quantum wells have been instrumental in telecommunications, enabling light amplification,” Patanjali Kambhampati tells PhysOrg.com, “but theory has suggested that a very small - colloidal - quantum ...

'Dark Pulse Laser' produces bursts of... almost nothing

June 9, 2010

In an advance that sounds almost Zen, researchers at the National Institute of Standards and Technology and JILA, a joint institute of NIST and the University of Colorado at Boulder, have demonstrated a new type of pulsed ...

Breakthrough Results in Laser Temperature Stability

May 2, 2004

Nanosemiconductor GmbH, an advanced facility for growth of nano-epitaxy wafers for semiconductor lasers, announced results achieved by Prof Bhattacharya’s group of the University of Michigan which demonstrates complete ...

World's First 10Gbps Quantum Dot Laser

September 9, 2004

Fujitsu Limited and a research group at the University of Tokyo led by Professor Yasuhiko Arakawa, today announced the joint development of a quantum dot laser that succeeds in minimizing temperature-sensitive output fluctuations, ...

Recommended for you

Two teams independently test Tomonaga–Luttinger theory

October 20, 2017

(Phys.org)—Two teams of researchers working independently of one another have found ways to test aspects of the Tomonaga–Luttinger theory that describes interacting quantum particles in 1-D ensembles in a Tomonaga–Luttinger ...

Using optical chaos to control the momentum of light

October 19, 2017

Integrated photonic circuits, which rely on light rather than electrons to move information, promise to revolutionize communications, sensing and data processing. But controlling and moving light poses serious challenges. ...

Black butterfly wings offer a model for better solar cells

October 19, 2017

(Phys.org)—A team of researchers with California Institute of Technology and the Karlsruh Institute of Technology has improved the efficiency of thin film solar cells by mimicking the architecture of rose butterfly wings. ...

Terahertz spectroscopy goes nano

October 19, 2017

Brown University researchers have demonstrated a way to bring a powerful form of spectroscopy—a technique used to study a wide variety of materials—into the nano-world.

6 comments

Adjust slider to filter visible comments by rank

Display comments: newest first

HealingMindN
3 / 5 (2) Jul 01, 2010
I want to print out a video greeting card and business cards with moving ads. Can I print piezo speakers too? What about a video tattoo?
jtdrexel
5 / 5 (2) Jul 02, 2010
I want to print out a video greeting card and business cards with moving ads. Can I print piezo speakers too? What about a video tattoo?


Dream On :-)
Quarl
2 / 5 (1) Jul 02, 2010
I want to print out a video greeting card and business cards with moving ads. Can I print piezo speakers too? What about a video tattoo?


Well, if you print a thin-film solar cell on your back and then print leads to an unobtrusively located printed control circuit which has printed leads to the tattoo...:-)
Jimbaloid
5 / 5 (4) Jul 02, 2010
I already have a laser printer ;-)
Nartoon
3 / 5 (1) Jul 03, 2010
The beginning of the light Sabre.
Hunnter
5 / 5 (1) Jul 04, 2010
Oh boy, i can't wait to read the morning newspaper, only to be blinded by a laser ad, quite literally this time.

But seriously, amazing work. Quantum dots get more amazing every time i hear about them.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.