Reactor upgrades help researchers study nuclear fusion as energy source

Feb 09, 2007
Reactor upgrades help researchers study nuclear fusion as energy source
A major objective of Alcator C-Mod is demonstrating that large currents can be driven in our plasma using radio frequency (rf) waves. To generate this rf power requires the use of advanced tubes called klystrons which are the red cylindrical objects in the picture. Up to 3 MW of microwave power can be produced and transferred to the plasma using the copper waveguides also seen in the picture, and a special antenna in the vacuum chamber launches the power in the proper way to generate current. Photo: Donna Coveney

For about six months of the year, bursts of a hot, electrically charged gas, or plasma, swirl around a donut-shaped tube in a special MIT reactor, helping scientists learn more about a potential future energy source: nuclear fusion.

During downtimes when the reactor is offline, as it is right now, engineers make upgrades that will help them achieve their goal of making fusion a viable energy source--a long-standing mission that will likely continue for decades.

Reactor upgrades help researchers study nuclear fusion as energy source
Shyri Marazita, an engineer at the MIT Plasma Science and Fusion Center, peers out of the Alcator C-Mod vacuum vessel. He is in the process of installing a liquid helium cooled cryopump, a modification that will help the reactor achieve a steady-state flow of plasma. Photo: Donna Coveney

MIT's reactor, known as Alcator C-Mod, is one of several tokamak plasma discharge reactors in the world. Inside the reactor, magnetic fields control the superheated plasma (up to 50 million degrees Kelvin) as it flows around the tube.

Fusion occurs when two deuterons, or one deuteron and one triton--nuclei of heavy hydrogen--fuse, creating helium and releasing energy. The reactions can only occur at extremely high temperatures.

Although MIT's reactor is smaller than others, it has a stronger magnetic field than some larger reactors, allowing the plasma to become denser at comparable temperatures. "That positions us to provide important data you can't get anywhere else," said Earl Marmar, head of MIT's Alcator C-Mod project and senior research scientist in the Department of Physics.

One major goal of the upgrades is to create a system where plasma can flow in a steady state, rather than short pulses, or bursts.

Last year, engineers added a microwave generator that creates phased waves that flow around the ring, reinforcing the plasma current. The microwaves interact with the highest velocity electrons in the plasma, pushing them around the ring.

"It's possible to use this approach to go to fully steady-state plasma," Marmar said. "As an attractive energy source, ultimately we want steady state."

Benefits of a steady-state system include a constant energy output, less need for energy storage and less stress on the system, he said.

This year's modifications include the installation of a cryopump, which will allow scientists to control the density of the plasma over a long period of time--another necessary step to achieving a steady-state flow.

Several other modifications will allow the researchers to more accurately measure properties of the plasma, such as density and temperature. The new devices will also allow them to more accurately detect and measure magnetic and electric fields generated by the plasma.

The reactor, which has been offline for upgrades since August, is expected to be ready to use again starting in March.

More than 100 MIT researchers from the Departments of Physics, Nuclear Science and Engineering, and Electrical Engineering and Computer Science, including about 30 graduate students, use the Alcator C-Mod reactor to run experiments.

On a recent morning, the control room, normally packed with scientists at about 100 computer monitors, was nearly empty while engineers, scientists and students worked on modifications to the reactor, located in the next room.

When experiments are going on, researchers from around the world can participate in and watch the proceedings through the Internet.

There is high demand for time to run experiments on the reactor, but priority is given to projects that have high relevance to the Alcator goals and also to MIT graduate student research projects.

"One of our highest priorities is to get graduate students the run time they need," Marmar said.

For more information on the Alcator project, visit www.psfc.mit.edu/research/alcator/ .

Source: by Anne Trafton, MIT

Explore further: New filter could advance terahertz data transmission

add to favorites email to friend print save as pdf

Related Stories

Exploring the universe with nuclear power

Feb 02, 2015

In the past four decades, NASA and other space agencies from around the world have accomplished some amazing feats. Together, they have sent manned missions to the Moon, explored Mars, mapped Venus and Mercury, ...

World's largest fusion device goes back to work

Sep 05, 2011

September is commonly the month where things begin to gather pace again, and in the world of fusion energy research, things are no different. European scientists working on the Joint European Torus (JET), ...

Sensors pave the way to using energy from the stars

May 30, 2011

(PhysOrg.com) -- The international ITER project is setting out to store the energy of stars in a reactor. To meet this challenge, scientists must be able to measure the properties of matter in fusion. A team ...

Recommended for you

New filter could advance terahertz data transmission

Feb 27, 2015

University of Utah engineers have discovered a new approach for designing filters capable of separating different frequencies in the terahertz spectrum, the next generation of communications bandwidth that ...

The super-resolution revolution

Feb 27, 2015

Cambridge scientists are part of a resolution revolution. Building powerful instruments that shatter the physical limits of optical microscopy, they are beginning to watch molecular processes as they happen, ...

A new X-ray microscope for nanoscale imaging

Feb 27, 2015

Delivering the capability to image nanostructures and chemical reactions down to nanometer resolution requires a new class of x-ray microscope that can perform precision microscopy experiments using ultra-bright ...

Top-precision optical atomic clock starts ticking

Feb 26, 2015

A state-of-the-art optical atomic clock, collaboratively developed by scientists from the University of Warsaw, Jagiellonian University, and Nicolaus Copernicus University, is now "ticking away" at the National ...

User comments : 0

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.