Bricks made with wool

Oct 05, 2010
These are bricks made with wool. Credit: Galán-Marín et al.

Spanish and Scottish researchers have added wool fibres to the clay material used to make bricks and combined these with an alginate, a natural polymer extracted from seaweed. The result is bricks that are stronger and more environmentally-friendly, according to the study published recently in the journal Construction and Building Materials.

"The objective was to produce bricks reinforced with and to obtain a composite that was more sustainable, non-toxic, using abundant local materials, and that would mechanically improve the bricks' strength", Carmen Galán and Carlos Rivera, authors of the study and researchers at the Schools of Architecture in the Universities of Seville (Spain) and Strathclyde (Glasgow, United Kingdom), tell SINC.

The wool fibres were added to the clay material used in the bricks, using alginate conglomerate, a natural polymer found in the cell walls of seaweed. The mechanical tests carried out showed the compound to be 37% stronger than other bricks made using unfired stabilised earth.

The study, which has been recently published in the Journal Construction and , was the result of close collaboration between the British and Spanish universities. The clay-based soils were provided by brick manufacturers in Scotland, which was also the source of the wool, since the local textile industry cannot use everything it produces. "The aim was to produce a material suitable for adverse climatic conditions, such as the specific ones in the United Kingdom", the authors explain.

This machine is making bricks using wool. Credit: Galán-Marín et al.

Advantages of environmentally-friendly bricks

The researchers studied the effect of reinforcing various soil types with sheep's wool, and arrived at various conclusions. "These fibres improve the strength of compressed bricks, reduce the formation of fissures and deformities as a result of contraction, reduce drying time and increase the bricks' resistance to flexion".

This piece of research is one of the initiatives involved in efforts to promote the development of increasingly sustainable construction materials. These kinds of bricks can be manufactured without firing, which contributes to energy savings. According to the authors: "This is a more sustainable and healthy alternative to conventional building materials such as baked earth and concrete blocks".

Untreated clay was one of the earliest building materials to be used by humankind. The oldest examples of this can be found in houses in the Near East dating from between 11,000 and 12,000 years ago. Earthy material mixed with plants and pebbles to make them stronger has also been found in certain archaeological deposits from 1400BCE in Sardinia (Italy).

Explore further: 3D printing is so last year: We're onto 4D printing now

More information: C. Galán-Marín, C. Rivera-Gómez y J. Petric. "Clay-based composite stabilized with natural polymer and fibre". Construction and Building Materials 24(8): 1462, Aug 2010.
Galán-Marín, C.; Rivera-Gómez, C.; Petric-Gray, J. "Effect of Animal Fibres Reinforcement on Stabilized Earth Mechanical Properties". Journal of Biobased Materials and Bioenergy 4(2): 121-128, June 2010.

Related Stories

Laying the foundations for a green industry

Jul 31, 2006

Australian university researchers have developed a strong, lightweight building material that they believe could generate a thriving new "green" industry for countries such as China and India.

Follow the 'Green' Brick Road?

May 22, 2007

Researchers have found that bricks made from fly ash--fine ash particles captured as waste by coal-fired power plants--may be even safer than predicted. Instead of leaching minute amounts of mercury as some ...

Computer modeling to build better mud bricks

Jun 29, 2010

Rammed earth and stabilized mud block or brick are cheap, easy to make, usually durable materials widely used for building homes and low-level structures, especially in developing countries. Despite their widespread use and ...

Lead from a Roman ship to be used for hunting neutrinos

Apr 16, 2010

(PhysOrg.com) -- Italy's National Institute of Nuclear Physics, at its laboratories in Gran Sasso, has received 120 lead bricks from an ancient Roman ship that sunk off of the coast of Sardinia 2,000 years ago. The ship's ...

Recommended for you

Team develops faster, higher quality 3-D camera

1 hour ago

When Microsoft released the Kinect for Xbox in November 2010, it transformed the video game industry. The most inexpensive 3-D camera to date, the Kinect bypassed the need for joysticks and controllers by ...

Researchers finding applications for tough spinel ceramic

11 hours ago

Imagine a glass window that's tough like armor, a camera lens that doesn't get scratched in a sand storm, or a smart phone that doesn't break when dropped. Except it's not glass, it's a special ceramic called ...

Classroom acoustics for architects

Apr 23, 2015

The Acoustical Society of America (ASA) has published a free online booklet for architects to aid in the application of ANSI/ASA S12.60-2010/Part 1-American National Standard Acoustical Performance Criteria, Design Requirements, ...

JRC wins competition on indoor localization

Apr 23, 2015

A team of JRC researchers outperformed 27 teams from academia and industry across the globe and achieved best overall result at a competition on indoor localisation in Seattle, USA. Providing accurate position ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

PPihkala
not rated yet Oct 05, 2010
So what is the longevity of the material? Will the wool inside the brick degrade with time (by bacteria), leading to worsening properties?

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.