Nanotube Thermocells Hold Promise as Energy Source

Feb 26, 2010
A view from an electron microscope shows the multiwalled carbon nanotube "buckypaper" used in the new thermocells.

(PhysOrg.com) -- A study published in the American Chemical Society's journal Nano Letters reveals that thermocells based on carbon nanotube electrodes might eventually be used for generating electrical energy from heat discarded by chemical plants, automobiles and solar cell farms. Dr. Ray Baughman, director of the Alan G. MacDiarmid NanoTech Institute, collaborated with an international team of researchers on the findings.

Efficiently harvesting the thermal currently wasted in industrial plants or along pipelines could create local sources of clean energy that in turn could be used to lower costs and shrink an organization’s energy footprint.

The new thermocells use nanotube electrodes that provide a threefold increase in energy conversion efficiency over conventional electrodes.

One of the demonstrated thermocells looks just like the button cell batteries used in watches, calculators and other small electronics. One key difference, however, is that these new thermocells can continuously generate electricity, instead of running down like a battery. The research netted other thermocells, as well, including electrolyte-filled, textile-separated nanotube sheets that can be wrapped around pipes carrying hot waste streams of manufacturing or electrical power plants. The temperature difference between the pipe and its surroundings produces an electrochemical potential difference between the sheets, which thermocells utilize to generate electricity.

Dr. Ray Baughman, the Robert A. Welch Chair in Chemistry and director of the Alan G. MacDiarmid NanoTech Institute, collaborated with an international team of researchers from the U.S., Australia, China, India and the Philippines.

“We have long been the Energy State, because Texas has oil and gas in the ground and Texans have invented key technologies for bringing them to the surface,” Baughman said. “But, being the Energy State in the future must increasingly include discovering new means for extracting all forms of energy. Harvesting waste thermal energy is just one direction our NanoTech Institute has taken with our international team to help provide an energy enabled future for Texas and the world.”

Nanotube Thermocells Hold Promise as Energy Source
A thermocell is wrapped around a stainless steel pipe to generate electrical power.

The research team estimates that multi-walled carbon nanotubes in large thermocells could eventually produce power at a cost of about $2.76 per watt from freely available waste energy, compared with a cost of $4.31 per watt for , which can only be used when the sun is shining. On a smaller scale, button cell sized thermocells could be used to power sensors or electronic circuits.

The new thermocells take advantage of the exceptional electronic, mechanical, thermal and chemical properties of carbon nanotubes. The nanotubes’ giant surface area and unique electronic structure afforded by their small diameter and nearly one-dimensional structure offer high current densities, which enhance the output of electrical power and the efficiency of energy harvesting.

“International collaboration with teammates from four universities in the United States, Australia and India enabled our initial breakthrough,” Baughman said. “Researchers from Dr. Gordon Wallace’s Intelligent Polymer Research Institute in Wollongong Australia have long worked side-by-side with us to solve key technological problems. Dr. Baratunde Cola’s NanoEngineered Systems and Transport Lab at the Georgia Institute of Technology, provided a key missing link. We will together work in the future to realize the full commercial potential of our technology, which requires further breakthroughs. I am especially proud that Stephanie Stoughton earned her place as a co-author while a Texan high school student in our NanoExplorers program.”

Nanotube Thermocells Hold Promise as Energy Source
Schematics show assembly of the thin thermocell wrapped around a pipe carrying cool, flowing liquid.

Stoughton, a former George A. Jeffrey NanoExplorer, is a sophomore studying materials science and engineering at Cornell University.

“My contribution was near the project’s beginning,” Stoughton said. “I did some of the early testing and helped create the buckypaper used in the nanotube electrodes.”

Stoughton credits her experience at the NanoTech Institute for offering her access to hands-on research as early as high school.

“UT Dallas and the NanoTech Institute have time and again given students unique opportunities to participate in cutting-edge research and work with top notch scientists,” Stoughton said. “My generation is one likely to face profound energy issues, and I’m proud to be a part of achieving sustainable solutions now as opposed to later, when energy issues are likely to be even more problematic.”

Explore further: Scientists fabricate defect-free graphene, set record reversible capacity for Co3O4 anode in Li-ion batteries

More information: Paper: www.me.gatech.edu/nest/images/nl903267n.pdf

Related Stories

Major Award for Carbon Natotube Partners

Jun 10, 2005

CSIRO and the NanoTech Institute of the University of Texas at Dallas have won the 2005 Avantex Innovation Prize for their breakthrough discovery of how pure carbon nanotubes can be spun into strong, flexible, electrically ...

Race for Superconductors Shrinks to Nanoscale

Oct 09, 2009

(PhysOrg.com) -- A team of researchers from UT Dallas, Clemson University and Yale University are using science on the nanoscale to address one of the most elusive challenges in physics - the discovery of ...

Solar Cell Researcher Explores Nanotech Ideas

Oct 05, 2009

(PhysOrg.com) -- A UT Dallas researcher envisions a time soon when plastic sheets of solar cells are inexpensively stamped out in factories and then affixed to cell phones, laptops and other power-hungry mobile ...

Scientists Track Heat in Tiny Rolls of Carbon Atoms

Mar 02, 2009

(PhysOrg.com) -- IBM Research scientists today announced a landmark study in the field of nanoelectronics; the development and demonstration of novel techniques to measure the distribution of energy and heat in powered carbon ...

Renewable hydrogen energy - an answer to the energy crisis

Apr 19, 2007

Harvesting solar energy to produce renewable, carbon free and cost effective hydrogen as an alternative energy source is the focus of a new £4.2 million research programme at Imperial College London, it is announced.

Recommended for you

Copper shines as flexible conductor

23 hours ago

Bend them, stretch them, twist them, fold them: modern materials that are light, flexible and highly conductive have extraordinary technological potential, whether as artificial skin or electronic paper.

Nanoparticles may aid oil recovery, frack fluid tracking

Aug 22, 2014

Two Colorado State University researchers are examining how nanoparticles move underground, knowledge that could eventually help improve recovery in oil fields and discover where hydraulic fracking chemicals ...

Nanostructure enlightening dendrite-free metal anode

Aug 19, 2014

Graphite anodes have been widely used for lithium ion batteries (LIBs) during the past two decades. The replacement of metallic lithium with graphite enables safe and highly efficient operation of LIBs, however, ...

User comments : 7

Adjust slider to filter visible comments by rank

Display comments: newest first

Slick
Feb 26, 2010
This comment has been removed by a moderator.
El_Nose
not rated yet Feb 26, 2010
lol nice one -- but since the box requires a high temperature to work wouldn't wraping it with a highly conductive device just aid thermal energy escaping the box?
Yevgen
3 / 5 (2) Feb 26, 2010
4 pages wasted without explaining how the device works.
Here is an actual explanation (specifically look at the figure showing ferri-ferrocyanide ions shuttling between cold and hot areas with electron given away at hot anode):
http://www.greenc...220.html
ThomasS
not rated yet Feb 26, 2010
Thanks Yevgen. They could also have put in some info at what temperatures the claims are. The cooler the waste heat, the more difficult it is to get the energy out of it.
otto1923
not rated yet Feb 27, 2010
heat discarded by chemical plants, automobiles and solar cell farms
And Bloom boxes. I predict a perfect storm of technological convergence: AI, gasification, fuel cells, solid state thermovoltaics, superconductivity. Also perpetual unemployment insurance.
otto1923
not rated yet Feb 27, 2010
I wonder- is there a Malthus-like theory which states that new technologies enable a greater rate of growth and therefore resource depletion than the economies they were meant to generate can compensate for? Something with entropy in it? Sure there is.
FastEddy
not rated yet Feb 28, 2010
Adding these "nanotube" thermal voltaic cells to the back side, the "shady side", of photo voltaic cells would increase the overall efficiencies of the combination. Heat dissipation of photo cells is a problem. Using that heat for more power is a solution.
NeilFarbstein
not rated yet Mar 01, 2010
Adding these "nanotube" thermal voltaic cells to the back side, the "shady side", of photo voltaic cells would increase the overall efficiencies of the combination. Heat dissipation of photo cells is a problem. Using that heat for more power is a solution.

thermocells pasted to the backs of solar cells will not solve the excess heat problem, they will hold the heat in and slow down its' transfer from the solar cells.