Review: Wireless charging lets you cut the cords

Oct 07, 2009 By RACHEL METZ , AP Technology Writer
The Powermat, left, and Duracell's myGrid are cordless battery chargers for small electronics, are pictured Wednesday, Oct. 7, 2009, in San Francisco. (AP Photo/Russel A. Daniels)

(AP) -- It's a pain to keep track of the chargers that go with cell phones, media players and other small electronics. It's even more annoying to stuff multiple power cords and adapters in your bag when you go out of town.

What if you could charge things without plugging them in?

I've started doing just that. I tested two mats that juice up small devices like on contact, with only the mat plugged into an outlet rather than each gadget. The mats are far from perfect, requiring special sleeves and adapters for electronics. But there's something thrilling about cutting (most of) the cords.

The first product I tried came from Powermat USA, which started selling two $100 mats this month.

One of them is an oblong mat designed for home and office use, which impressed me right out of the box because it was easy to set up and compatible with lots of popular gadgets. Powermat also sells a rectangular one that folds into thirds for traveling.

Both are available at Best Buy and Target, and are expected to start selling through Amazon.com next week.

Each Powermat comes with a little white cube that sports a miniUSB connector - the kind that goes into BlackBerrys and numerous other phones - and eight different tips that fit the charging port on an , iPod, PSP and other small electronics. Once you connect your gadget to the cube with the appropriate tip, you drop the cube onto the mat to start charging.

You can skip the step of using the cube, but that will cost more money. Powermat sells plastic cases for devices such as the iPhone, iPod Touch and Nintendo DSi, along with special back covers for some BlackBerrys. All these let you charge the devices by simply plopping them down on the pad. There's also a small charging dock that fits an iPod or iPhone.

These add-ons run $30 to $40. But it is much easier to keep the special case on an iPhone and then simply drop it on the pad when you need more juice.

Each Powermat can charge three gadgets at once; magnets hold them in place. When you put a phone on the Powermat it emits a soft white light and a chirpy "zzwhip" sound to let you know it is properly connected. A somewhat opposite noise tells you when the connection is broken.

Powermat uses induction to charge your electronics. Basically, when you drop a Powermat-enabled device on the mat, the two exchange a "handshake" using RFID, or radio-frequency identification technology. The mat identifies the device, determines how much power it needs, then starts transferring energy to it. Once a device is fully charged, Powermat will stop the electricity from flowing.

More important to me than the process was the speed, and Powermat charged my gadgets pretty quickly. It took about an hour and a half to refill an iPod Nano, an iPhone, and an HTC myTouch smart phone. That was about as long as it took when I plugged the myTouch and iPhone into the wall with traditional adapters. The iPod Nano needed even more time in a wall outlet, at a little more than two hours.

The other mat I tested, Duracell's myGrid ($80), was less impressive. It had sluggish charging times and more limited usability.

Initially released in 2007 by a company called WildCharge Inc. and recently licensed by Duracell, the myGrid consists mostly of a flat plastic square topped with mirrored metal slats. It will be in some Target stores this month, and is due to hit Radio Shack stores later in the year.

The pad will come with a few tips that plug into the bottom of cell phones. Those tips have to be connected to a "power clip," and a magnetic disk that you stick on the back of your phone helps keep the clip in place during charging. That's cumbersome. If all goes well, everything will stay connected, and a bright blue light on the side of the pad lets you know that your gadgets are being powered up.

Of course, this is assuming you have a gadget that is compatible with the pad. MyGrid's Web site says the product works with several Nokia, Motorola and phones, and since the tip that fits these latter two categories is a miniUSB tip, it should also work with other devices that have this charging port. I was able to charge the myTouch with it, though its slightly curved back made it a little difficult to keep everything connected.

If you have a BlackBerry Curve or Pearl or an iPod Touch you can buy a $35 rubber case that can also charge the gadget when you place it on the myGrid pad. I tested one that fits on the iPhone (it will be out in March) and found it super simple.

MyGrid works differently than the Powermat, and requires that metal contact points on the clips and rubber sleeves be touching the pad for power to be transferred to your phone.

It also took me longer to charge devices with the myGrid than with the Powermat: a bit more than 2 1/2 hours for an iPhone, and about four hours on a myTouch. I couldn't power up an iPod Nano because the Duracell pad lacks a compatible tip or case.

The myGrid's advantage is that you can charge up to four devices at once instead of three, and it doesn't matter where you place them on the pad.

But overall, because of its greater compatibility with and faster charging times, Powermat offers a better option, even if it is more expensive.

©2009 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.

Explore further: Selfie sticks could bring jail time in South Korea

add to favorites email to friend print save as pdf

Related Stories

'WildCharger' leads wireless power revolution

Nov 30, 2007

WildCharge Inc.'s new wireless charging pad has recently won several awards and sparked the interest from the electronics, automobile, and furniture industries as one of the first wireless charging devices.

Harness power of the sun with solar gadgets

Aug 26, 2009

In the past, if you wanted a solar-powered gadget, you typically had to shell out a lot of cash for something made by a company you'd never heard of. But that's starting to change, as major brands such as ...

Solio to Release Solar Hybrid Charger

Sep 26, 2007

The energy alternative company Solio will release a hand-held solar battery recharger on October 15, 2007. The sleek new design is for use on virtually all electronic devices. It comes with an adaptor tip ...

Gadgets: Good earphones, good price

Aug 27, 2009

Ultrasone announced a new set of headphones called the Zino. Just like anyone else, I plugged them into my iPod and hit play before I knew any specifics on them. From then on, I didn't want to take them off.

Recommended for you

GoGlove wearable aims to control life's soundtracks

Nov 26, 2014

Technology creatives are seeing the key attraction in wearables as being in solutions that save the user from fumbling around with the phone to make app adjustments or changes, or from repeatedly taking it ...

Amazon cuts Fire phone price to ignite sales

Nov 26, 2014

Amazon on Wednesday slashed the price of Fire mobile phones that stalled after launch early this year, becoming a drag on the US online retail titan's bottom line.

Tech review: Another year, another iPad

Nov 25, 2014

Some years, Apple introduces a new version of a product and the world rejoices. Other years, the updates are more under the hood, but they still sell a ton.

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

MorituriMax
not rated yet Oct 07, 2009
You're not "cutting the cords." You're just trading a wire for a sleeve. In my opinion plugging the wire in is easier than sliding the gadget into a sleeve, which may or may not require you to remove the sleeve you normally have wrapped around your gadget.
TeeCee
1 / 5 (1) Oct 07, 2009
Nothing new here... my cordless electric toothbrush has been inductively charging itself for years, without sleeves/plugs/adapters etc. - tho of course it does have its own little holder.

Nice idea in principal, lacks much in practise - until gadget manufacturers agree an inductive 'target hotspot' standard. But, then again, you'd still have to add some inductive charging circuitry into the gadget, adding weight, bulk and cost. The humble jack ain't dead yet!
JustinAN7
not rated yet Oct 07, 2009
the palm pre's implentation is way better. A battery cover is sold with the TouchStone or the "powermat" (a little magnetic stone.) so you just set the phone atop the stone without a case. it even holds it inplace with magnets!

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.