Nanotubes take flight: Scientists use nanomaterials to grow flying carpets, 'odako' kites

Jul 29, 2009
An odako grown at Rice University shows single-walled nanotubes lifting an iron and aluminum oxide "kite" as they grow while remaining firmly rooted in a carbon base.

(PhysOrg.com) -- With products that range from carpets to kites, you’d think Rice University chemist Bob Hauge was running a department store. What he's really running is a revolution in the world of carbon nanotechnology.

In a paper published this month in Nano Research, Hauge's Rice University team describes a method for making "odako," bundles of single-walled carbon nanotubes (SWNT) named for the traditional Japanese kites they resemble. It may lead to a way to produce meter-long strands of nanotubes, which by themselves are no wider than a piece of DNA.

Hauge, a distinguished faculty fellow in chemistry at Rice's Richard E. Smalley Institute for Nanoscale Science and Technology, and his co-authors, graduate students Cary Pint and Noe Alvarez, explained the odako after which the bundles are named are gigantic kites that take many hands to fly, hence the many lines that trail from them.

In this case, the lines are nanotubes, hollow cylinders of pure carbon. Individually, they're thousands of times smaller than a living cell, but Hauge's new method creates bundles of SWNTs that are sometimes measured in centimeters, and he said the process could eventually yield tubes of unlimited length.

Large-scale production of nanotube threads and cables would be a godsend for engineers in almost every field. They could be used in lightweight, superefficient power-transmission lines for next-generation electrical grids, for example, and in ultra-strong and lightning-resistant versions of carbon-fiber materials found in airplanes. Hauge said the SWNT bundles may also prove useful in batteries, fuel cells and .

To understand how Hauge makes nanokites, it helps to have a little background on flying carpets.

Last year, Hauge and colleagues found they could make compact bundles of nanotubes starting with the same machinery the U.S. Treasury uses to embed paper money with unique markings that make the currency difficult to counterfeit.

Hauge and his team -- which included senior research fellow Howard Schmidt and Professor Matteo Pasquali, both of Rice's Department of Chemical and Biomolecular Engineering; graduate students Pint and Sean Pheasant; and Kent Coulter of San Antonio's Southwest Research Institute -- used this printing process to create thin layers of iron and aluminum oxide on a Mylar roll. They then removed the layers and ground them into small flakes.

Here's where the process took off. In a mesh cage placed into a furnace, the metallic flakes would lift off and "fly" in a flowing chemical vapor. As they flew, arrays of nanotubes grew vertically from the iron particles in tight, forest-like formations. When done cooking and viewed under a microscope, the bundles looked remarkably like the pile of a carpet.

While other methods used to grow SWNTs had yielded a paltry 0.5 percent ratio of nanotubes to substrate materials, Hauge's technique brought the yield up to an incredible 400 percent. The process could facilitate large-scale SWNT growth, Pint said.

In the latest research, the team replaced the Mylar with pure carbon. In this setup, the growing nanotubes literally raise the roof, lifting up the iron and aluminum oxide from which they’re sprouting while the other ends stay firmly attached to the carbon. As the bundle of tubes grows higher, the catalyst becomes like a kite, flying in the hydrogen and acetylene breeze that flows through the production chamber.

Hauge and his team hope to follow up their work on flying carpets and nanokites with the holy grail of nanotube growth: a catalyst that will not die, enabling furnaces that churn out continuous threads of material.

"If we could get these growing so they never stop - so that, at some point, you pull one end out of the furnace while the other end is still inside growing - then you should be able to grow meter-long material and start weaving it," he said.

More information:

Read "Odako growth of dense arrays of single-walled carbon nanotubes attached to carbon surfaces" here: tinyurl.com/nanokite

Read "Synthesis of High Aspect-Ratio Carbon Nanotube 'Flying Carpets' from Nanostructured Flake Substrates" here: tinyurl.com/nanocarpet

Read "Role of Water in Super Growth of Single-Walled Carbon Nanotube Carpet" here: tinyurl.com/nanowater

Provided by Rice University (news : web)

Explore further: Physicists heat freestanding graphene to control curvature of ripples

add to favorites email to friend print save as pdf

Related Stories

Chemists create, grow nanotube seeds

Nov 17, 2006

Rice University chemists today revealed the first method for cutting carbon nanotubes into "seeds" and using those seeds to sprout new nanotubes. The findings offer hope that seeded growth may one day produce the large quantities ...

The longest carbon nanotubes you've ever seen

May 10, 2007

Using techniques that could revolutionize manufacturing for certain materials, researchers have grown carbon nanotubes that are the longest in the world. While still slightly less than 2 centimeters long, ...

Rice Refining Production of Pure Nanotube Fibers

Sep 05, 2004

Rice University scientists are refining pioneering chemical production methods used to make pure carbon nanotube fibers. Research appearing in tomorrow's issue of the journal Science describes the scalable production techniques, which yield highly alig ...

Nanotube's 'tapestry' controls its growth

Feb 05, 2009

HOUSTON -- (Feb. 5, 2009) -- Rice University materials scientists have put a new "twist" on carbon nanotube growth. The researchers found the highly touted nanomaterials grow like tiny molecular tapestries, ...

New method sorts nanotubes by size

Jun 23, 2006

Rice University scientists have developed the first method for sorting semiconducting carbon nanotubes based on their size, a long-awaited development that could form the basis of a nanotube purification system ...

Recommended for you

Twisted graphene chills out

Sep 17, 2014

(Phys.org) —When two sheets of graphene are stacked in a special way, it is possible to cool down the graphene with a laser instead of heating it up, University of Manchester researchers have shown.

Researchers use liquid inks to create better solar cells

Sep 17, 2014

(Phys.org) —The basic function of solar cells is to harvest sunlight and turn it into electricity. Thus, it is critically important that the film that collects the light on the surface of the cell is designed ...

User comments : 3

Adjust slider to filter visible comments by rank

Display comments: newest first

poi
not rated yet Jul 30, 2009
promising... very promising
Nerdle
not rated yet Jul 31, 2009
Wow i cant wait to see zer resistance wires running all of our electricity across Km's power lines
Birthmark
not rated yet Aug 20, 2009
The nanomaterials they are coming out with already are amazing, just wait another 10 years! This is amazing!