Tension in the nanoworld: Infrared light visualizes nanoscale strain fields

Jan 12, 2009
Infrared visualization of nanocrack evolution. a) Topography of triangular indents (depressions) at the surface of a SiC crystal. Indentation was performed by pressing a sharp diamond tip into the crystal surface. With increasing force F, the depression becomes larger and deeper. b) The infrared near-field images recorded at about 10 µm wavelength clearly show the regions around the indent where the crystal lattice is compressed (bright) or stretched (dark). Because of the exceptional high spatial resolution, the images reveal the onset and formation of nanoscale cracks (marked by dashed blue circles) when the indentation force is increased. Image: Max-Planck-Institut für Biochemie/Andreas Huber

(PhysOrg.com) -- A joint team of researchers at CIC nanoGUNE (San Sebastian, Spain) and the Max Planck Institutes of Biochemistry and Plasma Physics (Munich, Germany) report the non-invasive and nanoscale resolved infrared mapping of strain fields in semiconductors. The method, which is based on near-field microscopy, opens new avenues for analyzing mechanical properties of high-performance materials or for contact-free mapping of local conductivity in strain-engineered electronic devices (Nature Nanotechnology, advanced online publication, 11 Jan. 2009).

Visualizing strain at length scales below 100 nm is a key requirement in modern measurement because strain determines the mechanical and electrical properties of high-performance ceramics or modern electronic devices, respectively. The non-invasive mapping of strain with nanoscale spatial resolution, however, is still a challenge.

A promising route for highly sensitive and non-invasive mapping of nanoscale material properties is scattering-type Scanning Near-field Optical Microscopy (s-SNOM). Part of the team had pioneered this technique over the last decade, enabling chemical recognition of nanostructures and mapping of local conductivity in industrial semiconductor nanodevices. The technique makes use of extreme light concentration at the sharp tip of an Atomic Force Microscope (AFM), yielding nanoscale resolved images at visible, infrared and terahertz frequencies. The s-SNOM thus breaks the diffraction barrier throughout the electromagnetic spectrum and with its 20 nm resolving power matches the needs of modern nanoscience and technology.

Now, the research team has provided first experimental evidence that the microscopy technique is capable of mapping local strain and cracks of nanoscale dimensions. This was demonstrated by pressing a sharp diamond tip into the surface of a Silicon Carbide crystal. With the near-field microscope the researchers were able to visualize the nanoscopic strain field around the depression and the generation of nanocracks.

"Compared to other methods such as electron microscopy, the technique offers the advantage of non-invasive imaging without the need of special sample preparation" says Andreas Huber who performed the experiments as part of his Ph.D. project. "Specific applications of technological interest could be the detection of nanocracks before they reach critical dimensions, e.g. in ceramics or Micro-Electro-Mechanical Systems (MEMS), and the study of crack propagation", says Alexander Ziegler.

The researchers also demonstrated that s-SNOM offers the intriguing possibility of mapping free-carrier properties such as density and mobility in strained silicon. By controlled straining of silicon, the properties of the free carriers can be designed, which is essential to further shrink and speed-up future computer chips. For both development and quality control, the quantitative and reliable mapping of the carrier mobility is strongly demanded but until now no tool has been available.

"Our results promise interesting applications of s-SNOM in semiconductor science and technology such as the quantitative analysis of the local carrier properties in strain-engineered electronic nanodevices" says Rainer Hillenbrand, leader of the Nano-Photonics Group at MPI and the Nanooptics Laboratory at nanoGUNE.

Article: A. J. Huber, A. Ziegler, T. Köck, and R. Hillenbrand, Infrared nanoscopy of strained semiconductors, Nat. Nanotech., advanced online publication, January 11th, 2008, DOI 10.1038/NNANO.2008.399.

Provided by Max Planck Society

Explore further: Making quantum dots glow brighter

add to favorites email to friend print save as pdf

Related Stories

Unlocking the potential of simulation software

Aug 21, 2014

With a method known as finite element analysis (FEA), engineers can generate 3-D digital models of large structures to simulate how they'll fare under stress, vibrations, heat, and other real-world conditions.

Imaging ferroelectric domains

Jan 31, 2014

(Phys.org) —When thin films of ferroelectric materials are grown on single-crystal substrates, they can develop regions of aligned polarization—called "domains"—that often adopt complex patterns. Manipulation ...

Improving structural safety in bridges

Jan 29, 2014

One of the longest spans in the world is the San Francisco—Oakland Bay Bridge, which was severely damaged in the 1989 Loma Prieta earthquake. Final reconstruction of the eastern span began in 2002 and was completed in 2013.

Eight seconds of terror

Jan 17, 2014

(Phys.org) —Twenty years ago this week, in the predawn darkness of Jan. 17, 1994, at five seconds before 4:31 a.m. PST, the ground ruptured violently on a blind thrust fault (a crack in Earth's crust that ...

Recommended for you

Making quantum dots glow brighter

14 minutes ago

Researchers from the University of Alabama in Huntsville and the University of Oklahoma have found a new way to control the properties of quantum dots, those tiny chunks of semiconductor material that glow ...

The future face of molecular electronics

34 minutes ago

The emerging field of molecular electronics could take our definition of portable to the next level, enabling the construction of tiny circuits from molecular components. In these highly efficient devices, ...

Study sheds new light on why batteries go bad

Sep 14, 2014

A comprehensive look at how tiny particles in a lithium ion battery electrode behave shows that rapid-charging the battery and using it to do high-power, rapidly draining work may not be as damaging as researchers ...

Moving silicon atoms in graphene with atomic precision

Sep 12, 2014

Richard Feynman famously posed the question in 1959: is it possible to see and manipulate individual atoms in materials? For a time his vision seemed more science fiction than science, but starting with groundbreaking ...

Researchers create world's largest DNA origami

Sep 11, 2014

Researchers from North Carolina State University, Duke University and the University of Copenhagen have created the world's largest DNA origami, which are nanoscale constructions with applications ranging ...

User comments : 0