Discovery by UC Riverside physicists could enable development of faster computers

Jun 24, 2008
Ferromagnet/Semiconductor Structure
Sketch of a ferromagnet/semiconductor structure. When the MgO interface is very thin, spin up electrons, represented in this image with an arrow to the right, are reflected back to the semiconductor. At an intermediate thickness of the interface, spin down electrons are reflected back to the semiconductor, resulting in a "spin reversal" that can be used to control current flow. Credit: Kawakami lab, UC Riverside.

[B]Roland Kawakami's lab proposes a simple technique for controlling electron spin and current flow[/B]
Physicists at UC Riverside have made an accidental discovery in the lab that has potential to change how information in computers can be transported or stored. Dependent on the "spin" of electrons, a property electrons possess that makes them behave like tiny magnets, the discovery could help in the development of spin-based semiconductor technology such as ultrahigh-speed computers.

The researchers were experimenting with ferromagnet/semiconductor (FM/SC) structures, which are key building blocks for semiconductor spintronic devices (microelectronic devices that perform logic operations using the spin of electrons). The FM/SC structure is sandwich-like in appearance, with the ferromagnet and semiconductor serving as microscopically thin slices between which lies a thinner still insulator made of a few atomic layers of magnesium oxide (MgO).

The researchers found that by simply altering the thickness of the MgO interface they were able to control which kinds of electrons, identified by spin, traveled from the semiconductor, through the interface, to the ferromagnet.

Study results appear in the June 13 issue of Physical Review Letters.

Experimental results:

The spin of an electron is represented by a vector, pointing up for an Earth-like west-to-east spin; and down for an east-to-west spin.

In the researchers' experiment with the FM/SC structures, both spin up and spin down electrons were allowed to travel from the semiconductor to the ferromagnet.

The researchers found that when the structure's MgO interface is very thin (less than two atomic layers), spin down electrons pass through to the ferromagnet, while spin up electrons are reflected back, leaving only spin up electrons in the semiconductor.

They also found that when the interface is thicker than six atomic layers, both spin up and spin down electrons are reflected back, leaving electrons with zero net spin in the semiconductor.

But the surprising result for the researchers was that at an intermediate thickness, ranging from two to six atomic layers, the selectivity of the interface completely changes.

"We see a dramatic and complete reversal in the spin of electrons that pass through the interface," said Roland Kawakami, an assistant professor of physics who led the research team. "This time, spin up electrons pass through while spin down electrons are reflected back to the semiconductor. In other words, the thickness of the MgO interface determines whether spin up or spin down electrons are allowed to pass through it."

According to his research team, such a "spin reversal" can be used to control current flow.

Significance of the discovery:

"Electron spins are oriented at random in an ordinary electric circuit, and, therefore, do not affect current flow," explained Yan Li, the first author of the research paper, who made the discovery. "But if spin is polarized, that is, aligned in one direction, you can manipulate the flow of current and the transport of information – a feature that would be of great interest to the semiconductor industry. What is amazing is that only a couple of atomic layers of MgO can completely reverse the spin selection of the interface. This is unexpected because MgO is not a magnetic material."

Li, a graduate student in the Department of Physics and Astronomy working toward her doctorate in physics, said the research team will work next on making electronic devices based on the spin reversal. "This will not only test its feasibility for applications, but also help determine the cause of the spin reversal, which is still unclear," she said.

Kawakami's lab is one of very few labs in the world that perform both the advanced material synthesis and pulsed laser measurements needed for experiments with FM/SC structures.

"Without the strong interplay between the materials development and optical measurements, the type of discovery we made probably would not have been possible," Kawakami said.

A new area of research, spintronics already has helped develop disk-drive read heads and non-volatile memory chips. Researchers believe spintronics also will make "instant-on" computers one day, as well as chips that can store and process data.


Source: University of California - Riverside

Explore further: Creative adaptation of a quadcopter

add to favorites email to friend print save as pdf

Related Stories

Smartphones as a health tool for older adults

20 hours ago

A team of researchers from the Universitat Politècnica de Catalunya · BarcelonaTech (UPC) and the Universitat Autònoma de Barcelona (UAB) is creating a smartphone app that will help older adults to understand ...

Toward quantum technologies

Jun 26, 2014

Quantum mechanics is about to fundamentally change the way we can transmit and sense information. The idea is that information—represented by physical quantities such as the spin or the polarisation of ...

Spintronic interconnect modeling for beyond-CMOS computing

Jun 04, 2014

Georgia Institute of Technology researchers collaborating with and sponsored by Intel Corporation through the Semiconductor Research Corporation (SRC) have developed a physics-based modeling platform that advances spintronics ...

Recommended for you

Tesla says decision on battery factory months away

Aug 01, 2014

(AP)—Electric car maker Tesla Motors said Thursday that it is preparing a site near Reno, Nevada, as a possible location for its new battery factory, but is still evaluating other sites.

Comfortable climate indoors with porous glass

Jul 31, 2014

Proper humidity and temperature play a key role in indoor climate. In the future, establishing a comfortable indoor environment may rely on porous glass incorporated into plaster, as this regulates moisture ...

Crash-testing rivets

Jul 31, 2014

Rivets have to reliably hold the chassis of an automobile together – even if there is a crash. Previously, it was difficult to predict with great precision how much load they could tolerate. A more advanced ...

Customized surface inspection

Jul 31, 2014

The quality control of component surfaces is a complex undertaking. Researchers have engineered a high-precision modular inspection system that can be adapted on a customer-specific basis and integrated into ...

User comments : 1

Adjust slider to filter visible comments by rank

Display comments: newest first

superhuman
5 / 5 (1) Jun 24, 2008
This is a very promising discovery as it should allow easy control of electron spins.
It might even prove to be the pn junction of the future - a basic building block of every spintronic computer!