A new, greener cement to meet future demand

Jun 03, 2014

An EPFL-led consortium is developing a new blend of cement that promises to reduce the carbon footprint of concrete by up to 40%. Now it has received financial backing from the Swiss Agency for Development and Cooperation (SDC) to scale up its efforts.

Cement production is responsible for almost ten percent of human CO2 emissions. Nevertheless, it is one of the most sustainable construction materials. Now, an EPFL-led consortium has received backing from the Swiss Agency for Development and Cooperation (SDC) to speed up the development and testing of a new blend of low-carbon . Elaborated with partners from the Indian Institutes of Technology and from universities in Cuba and Brazil, this new blend substitutes up to half of the usual Portland cement used to make concrete with highly abundant clay and limestone, promising to reduce cement-related CO2 emissions by up to 40%. Applied globally, it could help bring down future global CO2 emissions by several percent.

Substituting a fraction of the Portland cement used to make concrete is a well-established way to cut emissions – understandably so, considering that the production of each ton of cement releases up to 800kg of CO2. However, alternative materials that allow substituting a large fraction of cement have been hard to find. Materials that are commonly used today – slag from the steel industry or fly ash from coal power plants are two examples – are not available in large enough quantities to keep up with demand.

Synergistic chemistry

As Karen Scrivener, the principle investigator of the project, explains, the strength of the combination of calcined clay and ground limestone, which the researchers call LC3 for Limestone Calcined Clay Cement, lies in its chemistry. When used together, the aluminates from the calcined clay interact with the calcium carbonates from the limestone, leading to a less porous, and therefore stronger, cement paste. While in the past, these materials have been used individually to replace a small fraction of the cement, together, they can replace up to half without altering the performance of the final product.

Thanks to partnerships with industrial and governmental partners, the researchers hope to see LC3 become the new gold standard of low-carbon cement, produced by all major cement companies. Two industrial scale pilot projects in India and Cuba have already emphatically demonstrated the robustness of their method and the ease with which it can be integrated into existing lines. In the next phase of the project, larger-scale production tests are scheduled with industrial partners.

LC3 is designed to meet the needs of both industry and users. It was developed in close collaboration with industrial partners and designed to integrate into existing cement production lines. Clay and limestone are available en masse in quarries around the world. And consumers will be able to use it the same way they use ordinary Portland cement today.

Meeting growing demand

Time is of the essence, according to Karen Scrivener, who heads EPFL's Construction Materials Laboratory. With global demand for cement to double by 2050, driven by growing demand in emerging economies, such as India, China, and Brazil, the need for low-carbon cement is becoming more and more pressing. The just over 4 million Swiss francs in funding from the Swiss Agency for Development and Cooperation will enable EPFL and its partners to do the necessary research and testing for the introduction and standardization of LC3, so that it makes it to the market as quickly as possible. "If we want to have a real impact on the sustainability of – its cost, its availability, and its environmental footprint – we have to act before demand explodes in the emerging and developing world."

Explore further: Environmentally friendly cement is stronger than ordinary cement

add to favorites email to friend print save as pdf

Related Stories

Limestone powder enhances performance of 'green' concrete

Sep 04, 2013

Adding limestone powder to "green" concrete mixtures—those containing substantial amounts of fly ash, a byproduct of coal-burning power plants—can significantly improve performance, report researchers from the National ...

The secret of nanoparticle packing in cement

Dec 20, 2012

Cement production is responsible for 5% of carbon dioxide emissions. If we are to invent a "green" cement, we need to understand in more detail the legendary qualities of traditional Portland cement. A research group partly ...

Recommended for you

A spray-on light show on four wheels: Darkside Scientific

Sep 14, 2014

Darkside Scientific recently drew a lot of gazes its way in its video release of a car treated to the company's electroluminescent paint called LumiLor. Electroluminescence (EL) is a characteristic of a material ...

Research project on accident-avoiding vehicle concluded

Sep 12, 2014

PRORETA 3 is completed after three and a half years of research work: The comprehensive driver assistance and automated maneuver concept supports the driver in keeping the vehicle in a safe driving corridor- ...

Making drones more customizable

Sep 12, 2014

A first-ever standard "operating system" for drones, developed by a startup with MIT roots, could soon help manufacturers easily design and customize unmanned aerial vehicles (UAVs) for multiple applications.

User comments : 0