Interfacial dynamics research may make industry machines safer, more efficient

April 18, 2017, Texas A&M University
Interfacial dynamics research may make industry machines safer, more efficient
Credit: Texas A&M University

Researchers with the Departments of Mechanical Engineering and Aerospace Engineering at Texas A&M University are taking complex interactions between drops of water and material surfaces and conducting fundamental research to understand why some droplets adhere to surfaces and why others don't.

The research has applications in many industries, and the team hopes that by using the fundamental understanding they have gained, their findings have the potential to be applied to a variety of scenarios to improve the efficiency, safety and effectiveness of industrial machines and equipment.

"The underlying principle we are seeking to study with this is very commonplace and yet very complex," said Dr. Sungyon Lee, an assistant professor in . "On a rainy day, you can just look out the window and see the water and wonder, 'Why do some of the droplets run down the window and others don't?' We are studying ways to answer this fundamental concept because of the applications it can have elsewhere."

Lee explains that this common phenomenon has applications in industries like transportation, oil and gas, engineering construction, color ink jet printing and many others. For example, a key challenge that faces aircraft engineers is that because of the altitude and speed at which aircraft operate, that remain on the wings during flight are able to freeze over on the wing and endanger the craft. Lee's research can provide a better fundamental understanding of why droplets may still adhere to an aircraft wing in those conditions and allow designers and engineers to create the wings in such a way that the droplets will no longer stick, making the plane safer.

"It isn't an easy question to answer," Lee said "But if we take this scenario with a bunch of droplets on a wing surface and now you have wind pushing those droplets, it becomes even more complicated as the forces and factors that cause these phenomena are increased. It turns out that predicting that threshold between what makes a droplet stick and what makes it run off a surface is not trivial at all, so there are a lot of fundamental questions we can ask even in a simple scenario."

Lee co-authored an article, "Droplet Depinning in a Wake," which was published as a rapid communication in the journal Physical Review Fluids.

The research is part of a project funded by the National Science Foundation and is being co-investigated by Dr. Edward White, associate department head and associate professor in the department. White and his students had been exploring at what point droplets roll off at exposure to different wind speeds, interested in aircraft applications. Lee was able to bring her knowledge of interfacial phenomena in fluid mechanics, or how two phases like water and a surface meet and interact, to help White in his research and they became co-investigators on the project. Lee is the principal investigator and is excited to see how the team's research can be applied more broadly.

"I like fundamental, beautiful problems like this and it is just the tip of the iceberg," Lee said. "Fundamental research is another way of changing the world by understanding the world better and gaining something much deeper that can be applied to a variety of areas in a much broader sense."

Explore further: New model describing the deformation and breakup of droplets could help improve nanoscale printing and spraying

Related Stories

Acetone experiences Leidenfrost effect, no hotplate needed

March 14, 2017

In doing his due diligence, cleaning his lab equipment, fluid physicist Stoffel Janssens from the Mathematical Soft Matter Unit in the Okinawa Institute of Science and Technology (OIST), Okinawa, Japan, took notice of the ...

New surface makes oil contamination remove itself

June 17, 2016

Researchers of Aalto University have developed surfaces where oil transports itself to desired directions. Researchers' oleophobic surfaces are microtextured with radial arrays of undercut stripes. When oil drops fall on ...

Researchers identify movement of droplets on soft surfaces

August 5, 2015

Researchers from the University of Twente have succeeded in clearly identifying why droplets on soft, squishy surfaces react differently than on hard surfaces. A water droplet, for example, moves very differently over jelly ...

An air cushion for falling droplets

November 11, 2014

Falling droplets bounce as many as fifteen times before they come to rest on a flat surface. In the past, it was believed that this phenomenon is limited to water drops on superhydrophobic surfaces.

Recommended for you

Pattern formation—the paradoxical role of turbulence

February 19, 2018

The formation of self-organizing molecular patterns in cells is a critical component of many biological processes. Researchers from Ludwig-Maximilians-Universitaet (LMU) in Munich have proposed a new theory to explain how ...

Converting heat into electricity with pencil and paper

February 19, 2018

Thermoelectric materials can use thermal differences to generate electricity. Now there is an inexpensive and environmentally friendly way of producing them with the simplest tools: a pencil, photocopy paper, and conductive ...

Bringing a hidden superconducting state to light

February 16, 2018

A team of scientists has detected a hidden state of electronic order in a layered material containing lanthanum, barium, copper, and oxygen (LBCO). When cooled to a certain temperature and with certain concentrations of barium, ...

0 comments

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.