Absorbing electromagnetic energy while avoiding the heat

January 27, 2017 by Ken Kingery, Duke University
Each cylinder of this new non-metal metamaterial is made of boron-doped silicon and precisely tailored to absorb electromagnetic waves. Credit: Willie Padilla, Duke University

Electrical engineers at Duke University have created the world's first electromagnetic metamaterial made without any metal. The device's ability to absorb electromagnetic energy without heating up has direct applications in imaging, sensing and lighting.

Metamaterials are synthetic materials composed of many individual, engineered features that together produce properties not found in nature. Imagine an moving through a made of thousands of tiny electrical cells. If researchers can tune each cell to manipulate the wave in a specific way, they can dictate exactly how the wave behaves as a whole.

For researchers to manipulate electromagnetic waves, however, they've typically had to use electrically conducting metals. That approach, however, brings with it a fundamental problem of metals—the higher the electrical conductivity, the better the material also conducts heat. This limits their usefulness in temperature-dependent applications.

In a new paper, at Duke University demonstrate the first completely dielectric (non-metal) electromagnetic metamaterial—a surface dimpled with cylinders like the face of a Lego brick that is designed to absorb . While this specific frequency range sits between infrared waves and microwaves, the approach should be applicable for almost any frequency of the electromagnetic spectrum.

The results appeared online on Jan. 9 in the journal Optics Express.

"People have created these types of devices before, but previous attempts with dielectrics have always been paired with at least some metal," said Willie Padilla, professor of electrical and computer engineering at Duke University. "We still need to optimize the technology, but the path forward to several applications is much easier than with metal-based approaches."

A closer look at one of the cylinders comprising a new non-metal metamaterial. The arrows depict how different aspects of an electromagnetic field interact with the cylinder. Credit: Willie Padilla, Duke University

Padilla and his colleagues created their metamaterial with boron-doped silicon—a non-metal. Using computer simulations, they calculated how terahertz waves would interact with cylinders of varying heights and widths.

The researchers then manufactured a prototype consisting of hundreds of these optimized cylinders aligned in rows on a flat surface. Physical tests showed that the new "metasurface" absorbed 97.5 percent of the energy produced by waves at 1.011 terahertz.

Efficiently absorbing energy from electromagnetic waves is an important property for many applications. For example, can operate in the terahertz range, but because they have previously included at least some metal, getting sharp images has been challenging.

"Heat propagates fast in metals, which is problematic for thermal imagers," said Xinyu Liu, a doctoral student in Padilla's laboratory and first author of the paper. "There are tricks to isolate the metal during fabrication, but that becomes cumbersome and costly."

Another potential application for the new technology is efficient lighting. Incandescent light bulbs make light but also create a significant amount of wasted heat. They must operate at high temperatures to produce light—much higher than the melting point of most metals.

"We can produce a dielectric metasurface designed to emit light, without producing waste heat," Padilla said. "Although we've already been able to do this with metal-based metamaterials, you need to operate at high temperature for the whole thing to work. Dielectric materials have melting points much higher than metals, and we're now quickly trying to move this technology into the infrared to demonstrate a lighting system."

Explore further: Invisibility cloak with photonic crystals

More information: Xinyu Liu et al, Experimental realization of a terahertz all-dielectric metasurface absorber, Optics Express (2017). DOI: 10.1364/OE.25.000191

Related Stories

Invisibility cloak with photonic crystals

August 30, 2016

Almost as elusive as unicorns, finding practical materials for invisibility cloaking is challenging. Michigan Technological University researchers have new ideas how to solve that.

Metamaterial uses light to control its motion

October 10, 2016

Researchers have designed a device that uses light to manipulate its mechanical properties. The device, which was fabricated using a plasmomechanical metamaterial, operates through a unique mechanism that couples its optical ...

Metamaterials shine bright as new terahertz source

April 23, 2015

Metamaterials allow design and use of light-matter interactions at a fundamental level. An efficient terahertz emission from two-dimensional arrays of gold split-ring resonator metamaterials was discovered as a result of ...

Lego-like wall produces acoustic holograms

October 14, 2016

Research Triangle engineers have developed a simple, energy-efficient way to create three-dimensional acoustic holograms. The technique could revolutionize applications ranging from home stereo systems to medical ultrasound ...

New metamaterial paves way for terahertz technologies

October 24, 2016

A research team led by UCLA electrical engineers has developed an artificial composite material to control of higher-frequency electromagnetic waves, such as those in the terahertz and far-infrared frequencies.

Team develops new metamaterial device

February 24, 2009

An engineered metamaterial proved it can function as a state-of-the-art device in the complex terahertz range of the electromagnetic spectrum, setting a standard of performance for modulating tiny waves of radiation, according ...

Recommended for you

Gravitational wave detectors to search for dark matter

August 16, 2018

Gravitational wave detectors might be able to detect much more than gravitational waves. According to a new study, they could also potentially detect dark matter, if dark matter is composed of a particular kind of particle ...

Taking a closer look at unevenly charged biomolecules

August 16, 2018

In clinical diagnostics, it is critical to monitor biomolecules in a simple, rapid and sensitive way. Clinicians most often monitor antibodies because these small proteins attach to antigens, or foreign substances, we face ...


Adjust slider to filter visible comments by rank

Display comments: newest first

5 / 5 (6) Jan 27, 2017
Ok, One question... if it adsorbs 97% of the energy without heating up then where does the energy go?
5 / 5 (3) Jan 27, 2017
Ok, One question... if it adsorbs 97% of the energy without heating up then where does the energy go?

And silicon is also a quite good conductor of heat - about 3 times better than cast iron and 2/3 as good as aluminum...
not rated yet Jan 28, 2017
Could this also find an application in light weight shielding for spacecraft and astronauts?
Whydening Gyre
5 / 5 (2) Jan 28, 2017
Ok, One question... if it adsorbs 97% of the energy without heating up then where does the energy go?

Transferred into the "conduction" aspect? This would indicate a HIGH efficiency...
5 / 5 (1) Jan 28, 2017
If the energy doesn't go into heat will it be converted to electricity?
Does this also work with Gamma rays?
Would this metamaterial also work if made from Vanadium Oxide?
Da Schneib
5 / 5 (3) Jan 28, 2017
If it's not heat, it has to be current, radiation, or physical movement. There's nothing else.

There's not enough detail in this article to actually tell what's going on.
5 / 5 (2) Jan 29, 2017
If this technique was optimized for the sun's light at the earth's surface it could be used as an optical rectifying antenna (rectenna) and therefore have amazing photovoltaic efficiency.

Since sunlight is of a whole spectrum of frequencies, perhaps one you could use a tower-of-Hanoi type tower of decreasing circumference to capture multiple frequencies at once.
not rated yet Feb 09, 2017
I wonder what would happen if you tailor this to microwave radiation and then line the back-side of an EM-drive with this.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.