Researchers immobilize underwater bubbles

August 9, 2016, American Institute of Physics
Microbubble immobilized in the solution, above the apex of thenanoelectrode (potential Vm=3V, _ v=1000 Hz). Credit: CINaM-CNRS Aix-Marseille University

Controlling bubbles is a difficult process and one that many of us experienced in a simplistic form as young children wielding a bubble wand, trying to create bigger bubbles without popping them. A research team in CINaM-CNRS Aix-Marseille Université in France has turned child's play into serious business.

They demonstrated they could immobilize a microbubble created from water electrolysis as if the Archimedes' buoyant force that would normally push it to the surface didn't exist. This new and surprising phenomenon described this week in Applied Physics Letters, from AIP Publishing, could lead to applications in medicine, the or micromanipulation technology.

While bubbles are observed frequently in nature, it is not easy to control their diameter, position or time of formation. Previous work by the French research team explored how to control the hydrogen and oxygen gas bubbles formed by the breakdown of water using electricity. They showed that if one of the electrodes is tip-shaped—with a curvature radius at its apex ranging from 1 nanometer to 1 micrometer—and an alternating electric current with defnite values of amplitude and frequency was used, microbubbles could be produced at a single point at the apex of the nanoelectrode.

In the current work, the team has demonstrated a new and surprising phenomenon: the immobilization of a single microbubble in water. After a bubble is produced (at the apex of the nanoelectrode), it is immobilized by rapidly increasing the frequency of the . It is a stable situation: No matter which direction the electrode moves, the bubble remains above and at the same distance from the electrode.

Immobilized bubble, slowly decreasing with time (Vm = 3.43 V, v =1000 Hz): t=0 (a), t=2 min 6 s (b), t=3 min 55 s (c) and t=4 min 33 s (d). Same scale for all the images. Credit: CINaM-CNRS Aix-Marseille University

The scientists propose that the hydrogen or enter the immobilized bubble through the lower surface and exit the bubble through the upper surface. The gas molecules are only produced at a single point at the apex of the nanoelectrode.

The team from CINaM-CNRS worked with researchers in acoustics who use ultrasounds for the detection and the characterization of microbubbles. They needed highly calibrated bubbles and the team proposed producing such bubbles using water electrolysis. The team incorporated a number of new ideas and methods in their approach. "While it is usual to consider that electrolysis is controlled by the electric potential, we show that the fundamental quantity is in fact the electric field which is why we use a tip-shaped electrode with a very small curvature radius at the apex," said Juan Olives, a member of the research team. The use of an alternating current of sufficient frequency then produces "nanoelectrolysis", which is the nanolocalization of the electrolysis reactions at a single point.

The greatest surprise in the findings was that, although nothing seems to move when you observe the experiment, in fact, all is moving in an apparent steady state, Olives said. Hydrogen and oxygen molecules are continually produced at the apex of the nanoelectrode, they move in the solution and in the bubble, they enter and leave the bubble, and there is a convection velocity in the solution and in the bubble. Everything is moving, except the surface of the bubble, Olives said.

Controlling microbubbles is critical to numerous applications in medicine including as ultrasound contrast agents, for breaking up blood clots, and for gas embolotherapy, which is the intentional blocking of an artery to prevent excessive blood loss. Controlling microbubbles is also important in the nuclear industry, where microbubbles in liquid sodium coolant can cause problems.

Explore further: Zero-dimensional transistor harvests bubble energy wasted during water electrolysis

More information: Zoubida Hammadi, Laurent Lapena, Roger Morin and Juan Olives, "Immobilization of a bubble in water by nanoelectrolysis," Applied Physics Letters August 9, 2016. DOI: 10.1063/1.4960098

Related Stories

Soap bubbles' secrets go pop

February 23, 2016

Some phenomena that appear to be well understood are much more mysterious than it seems. In spite of the numerous applications that rely on the presence or absence of bubbles, no advanced scientific studies had been carried ...

Cavitation bubbles bursting with cleaning power

January 12, 2016

It's easy to think of soap suds when one thinks of bubbles, but these bubbles can clean without chemicals. These are cavitation bubbles, which are created when air is churned up in water. And what researchers are learning ...

Mysterious nanobubble burst?

December 2, 2008

(PhysOrg.com) -- The nanobubbles that develop on submerged surfaces should not really be able to exist. Because of the enormous internal pressure, they should disappear within a short time. Nevertheless, they sometimes last ...

Sound increases the efficiency of boiling

May 24, 2012

Scientists at the Georgia Institute of Technology achieved a 17-percent increase in boiling efficiency by using an acoustic field to enhance heat transfer. The acoustic field does this by efficiently removing vapor bubbles ...

Recommended for you

Walking crystals may lead to new field of crystal robotics

February 23, 2018

Researchers have demonstrated that tiny micrometer-sized crystals—just barely visible to the human eye—can "walk" inchworm-style across the slide of a microscope. Other crystals are capable of different modes of locomotion ...

Researchers turn light upside down

February 23, 2018

Researchers from CIC nanoGUNE (San Sebastian, Spain) and collaborators have reported in Science the development of a so-called hyperbolic metasurface on which light propagates with completely reshaped wafefronts. This scientific ...

Seeing nanoscale details in mammalian cells

February 23, 2018

In 2014, W. E. Moerner, the Harry S. Mosher Professor of Chemistry at Stanford University, won the Nobel Prize in chemistry for co-developing a way of imaging shapes inside cells at very high resolution, called super-resolution ...

Recurrences in an isolated quantum many-body system

February 23, 2018

It is one of the most astonishing results of physics—when a complex system is left alone, it will return to its initial state with almost perfect precision. Gas particles, for example, chaotically swirling around in a container, ...

Hauling antiprotons around in a van

February 22, 2018

A team of researchers working on the antiProton Unstable Matter Annihilation (PUMA) project near CERN's particle laboratory, according to a report in Nature, plans to capture a billion antiprotons, put them in a shipping ...

1 comment

Adjust slider to filter visible comments by rank

Display comments: newest first

katesisco
1 / 5 (1) Aug 10, 2016

Seem to recall that Dr W Brown was working on cavitation aspects at MIT which he subsequently used in his book In The Beginning.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Click here to reset your password.
Sign in to get notified via email when new comments are made.